MTS-205 205 Amp MIG/TIG-Torch/Stick Arc Combo Welder, Weld Aluminum(MIG) 110/230V Dual Voltage Welding New

MTS-205 205 Amp MIG/TIG-Torch/Stick Arc Combo Welder, Weld Aluminum(MIG) 110/230V Dual Voltage Welding New

AMICO Power 3-IN-1 MIG/TIG/STICK Arc Combo Welding Machine, Very Easy to weld 1/2" Aluminum. MTS-205 is the perfect choice for projects and repairs around the home and auto body shop. This welder can work well with solid wire and flux wire as well as aluminum wire. It also has the TIG and STICK function, can weld steel and stainless steel perfectly. The welder output range 10-205 amp. It uses standard flux-core wire(E71-gs) or steel wire 0.6-1.0mm, and aluminum wire. It has settings to easily adjust the output according to the thickness and changing the polarity according to the type of wires. Specifications: Welder Type: 3-IN-1 MIG/TIG/STICK Combo Welder, Output Terminal Type: Direct Wire, Power Supply: AC 100V-240V/Single Phase/50-60Hz, Effective Input Current: 115V: 35.0A(MIG)/21.5A(TIG)/35.7A(STICK), 230V: 27.0A(MIG)/15.5A(TIG)/24.8A(STICK), Maximum Input Current: 115V: 45.2A(MIG)/27.7A(TIG)/46.0A(STICK), 230V: 34.8A(MIG)/20.0A(TIG)/32.0A(STICK), Current Range Output: MIG: 115V/50A-150A, 230V/50A-205A; TIG: 115V/10A-130A, 230V/10A-170A; STICK: 115V/10A-130A, 230V/10A-170A. Nominal DC Open Circuit Voltage (OCV): 56V, Welding Output,104F(40C),10 min(230V): MIG: 205A/24.2V, TIG: 170A/16.8V, STICK: 170A/26.8V. Duty Cycle: MIG: 60% at 205A, 100% at 158A; TIG: 60% at 170A, 100% at 132A; STICK: 60% at 170A 100% at 132A. Package Includes: 13 ft. 250A pro. MIG gun and cable assembly, 13 ft. 250A pro. TIG Torch gun and cable assembly, 10 ft. 500A electrode holder and cable assembly, 10 ft. 630A work clamp and cable assembly, 120V/240V power plug adapter, 8 feet air hose use for Co2 and Argon connect, 1 spool 2 lbs. aluminum wire use for MIG weld, 1 spool 2 lbs. steel wire use for MIG weld, 2 tungsten Needle use for TIG weld, 4 electrodes use for Stick/Arc Weld, 1 V-drive roll for 0.023" & 0.030" (0.6mm & 0.8mm), 1 U-drive roll for 0.030" & 0.035" (0.8mm & 0.9mm), 1 V-drive roll for 0.035" & 0.040" (0.9mm & 1.0mm), Owners Manual.

  • UPC: 670628797264
  • ASIN: B07B85LBCQ
  • Brand: Amico
  • Size: 205 Amp
  • Manufacturer: Amico Power Corp

Ammo of Mig Jimenez Aluminium Pallet (6 Wells) #8008

Ammo of Mig Jimenez Aluminium Pallet (6 Wells) #8008

Ammo of Mig Jimenez ALUMINIUM PALLET (6 WELLS) #8008

  • UPC: 798277003250
  • ASIN: B00Y968J04
  • Brand: Ammo of Mig Jimenez
  • Manufacturer: Ammo of Mig Jimenez

Lincoln Electric Magnum PRO 100SG Spool Gun | for Aluminum MIG Welding | Compatible with PowerMIG Machines | 10 FT Cable | K3269-1

Lincoln Electric Magnum PRO 100SG Spool Gun | for Aluminum MIG Welding | Compatible with PowerMIG Machines | 10 FT Cable | K3269-1

The Magnum PRO 100SG spool gun is the lowest cost way to add reliable and precise wire feeding performance for soft aluminum wire. It’s easy to set up for occasional and experienced welders on Lincoln Electric compact wire feeder/welders.

  • UPC: 015082556758
  • ASIN: B00CP96KJO
  • Brand: Lincoln Electric
  • Size: 0.030" to 0.035"
  • Manufacturer: Lincoln Electric

LOTOS MIG175 175AMP Mig Welder with Free Spool Gun, Mask, Aluminum Welding Wires, Solid Wires, Argon Regulator, Standard MIG Gun

LOTOS MIG175 175AMP Mig Welder with Free Spool Gun, Mask, Aluminum Welding Wires, Solid Wires, Argon Regulator, Standard MIG Gun

About Lotos TechnologyHeadquartered in Sunnyvale, California, USA, Lotos Technology supplies quality welding and cutting tools to small businesses and Do-It-Yourself (DIY) buyers. Since 2007, our products have gained recognition as a reputable source for affordable industrial and consumer based portable plasma cutters and welders. We are proud of our product, quality and after-sale service. We offer quality welding and cutting tools to small businesses and DIY buyers. Our tools help you with your DIY projects to "Cut it, Weld it, Build it" to get the job done! The LOTOS MIG175 is one of the most versatile welders. It is able to weld aluminum with the spool gun. Its transformer technology has been proven to be reliable and durable. MIG175 can easily connected to your existing 220V wall outlet and can be setup quickly within 10 minutes. It handles industrial standard 4" or 8" wire spools and incorporates re-settable overload protection to assure long operating life.

  • UPC: 856381005574
  • ASIN: B00QMXEIMK
  • Brand: Lotos Technology
  • Manufacturer: Lotos

Lotos Technology MSG094 Spool Gun for Aluminum Welding for Lotos MIG Welders MIG140, Black

Lotos Technology MSG094 Spool Gun for Aluminum Welding for Lotos MIG Welders MIG140, Black

9ft 4 prong MIG spool gun with 1lb Φ0.9mm Aluminum welding wire installed; It only works for genuine Lotos MIG welders

  • UPC: 856381005185
  • ASIN: B00S8W31V2
  • Brand: Lotos Technology
  • Manufacturer: Lotos Technology

ER4043 - MIG Aluminum Welding Wire - 1 Lb x 0.035" (4 SPOOLS)

ER4043 - MIG Aluminum Welding Wire - 1 Lb x 0.035" (4 SPOOLS)

ER4043 - WIRE - MIG (GMAW) - ALUMINUM AWS A5.10 Welding Positions: All, except vertical down INTRODUCTION: MIG solid wire electrode with aluminum 5% silicon for welding heat-treatable base alloys and more specifically, 6XXX series alloys. Untreated low strength values. Resistant to hot cracks. Main areas of use are welds on cast aluminum. Not recommended for materials to be anodized. USES: Materials: AlSiMg, AlMgSi. For welding 6XXX alloys, and most casting alloys, Automotive components such as frame and drive shafts, Bicycle frames CHEMICAL COMPOSITION (%): Chemical Composition Al Si Fe Cu Mn Requirement Balance 4.5-6.0 ?0.8 ?0.3 ?0.05 Typical test result Balance 5.12 0.13 0.01 0.01 Chemical Composition Mg Zn Ti Be Requirement ?0.05 ?0.1 ?0.2 ?0.0003 Typical test result 0.03 0.002 0.007 0.0002 WELDING PARAMETERS (DC+): Diameter WFS (ipm) Amps Volts (lb/100 ft) Argon (cfh) 0.030" 480-626 60-175 15-24 0.65-1.25 25-30 0.035" 450-750 70-185 15-27 1.0-4.25 30-35 0.045" 330-500 125-260 20-29 1.0-4.25 35-45 1/16" 250-450 170-300 24-30 3.8-6.6 45-75 Shielding Gas: 100% Argon, Argon / Helium Mixtures The above parameters are for reference purpose and depend on diverse factors. Run tests, evaluate and set your welding parameters before starting the welding job.

  • UPC: 685867900801
  • ASIN: B01DTLYQ7E
  • Brand: SÜA
  • Size: 0.035" - (4 Spools)
  • Manufacturer: TGB

Aluminum MIG Welding Wires, 4043 Alloy, 1/16 in Dia, 1 lb Spool

Aluminum MIG Welding Wires, 4043 Alloy, 1/16 in Dia, 1 lb Spool

Best Welds 4043 Welding Wires Low melting temperature and fluidity. Moderate electrical and thermal conductivity. Superior surface finish for maximum arc transfer. ER 4043 aluminum filler metal is one of the most widely used alloys for general repair and fabrication for aluminum applications. With a 5% silicon level, ER 4043 produces smooth arc results which allow for better arc wetting characteristics and a more fluid arc Pack of 1

  • ASIN: B01HVP7SC4
  • Brand: BEST WELDS
  • Manufacturer: Best Welds

140 Amp MIG Wire Welder, Flux Core & Aluminum Gas Shielded Welding with 2T/4T Switch Argon Regulator, Metal Wire Feeder

140 Amp MIG Wire Welder, Flux Core & Aluminum Gas Shielded Welding with 2T/4T Switch Argon Regulator, Metal Wire Feeder

About Lotos Technology Headquartered in Sunnyvale, California, USA, Lotos Technology supplies quality welding and cutting tools to small businesses and Do-It-Yourself (DIY) buyers. Since 2007, our products have gained recognition as a reputable source for affordable industrial and consumer based portable plasma cutters and welders. We are proud of our product, quality and after-sale service. We offer quality welding and cutting tools to small businesses and DIY buyers. Our tools help you with your DIY projects to "Cut it, Weld it, Build it" to get the job done! The LOTOS MIG140 features a 140 amp MIG welder that can weld at industrial quality and performance at a very affordable price. The most versatile and perfect welder for do-it-yourself home users as well as professional users. The LOTOS MIG140 is also spool gun capable for welding aluminum. It can be easily connected to your existing 110V wall outlet and quickly setup within 10 minutes or less. It handles industrial standard 4" or 8" wire spools and incorporates a thermal overload protection system to protect your welder.

  • UPC: 856381005581
  • ASIN: B00S8R1ST4
  • Brand: Lotos Technology
  • Size: 1-(Pack)
  • Manufacturer: Lotos Technology

WeldingCity 5 Rolls of ER4043 Aluminum MIG Welding Wire 1-Lb Spool 0.035" (0.9mm)

WeldingCity 5 Rolls of ER4043 Aluminum MIG Welding Wire 1-Lb Spool 0.035" (0.9mm)

Premium quality ER4043 Aluminum MIG welding wire 1-Lb spool. Specification: AWS A5.10/ASME SFA A5.10/ER4043. 1-lb weight of MIG welding wire. 4" spool wrapped in moisture-resistant plastic film. Features and Applications: 5% silicon aluminum (AlSi5) filler metal welding wire for MIG welding process. The silicon additions result in improved fluidity (wetting action) to make the alloy a preferred choice by welders. Less sensitive to weld cracking and produces brighter. Recommended for welding 3003, 3004, 5052, 6061, 6063, and casing alloys 43, 355, 356, and 214. Available wire diameters: 0.030" (0.8mm), 0.035" (0.9mm), 0.045" (1.2mm).

  • UPC: 799491550278
  • ASIN: B00KGDGYH4
  • Brand: WeldingCity
  • Size: 5-pk 0.035"
  • Manufacturer: WeldingCity.com

Radnor 64001504 3/64'' ER4043 4043 Aluminum MIG Wire 1# 4'' Spool (5/EA)

Radnor 64001504 3/64'' ER4043 4043 Aluminum MIG Wire 1# 4'' Spool (5/EA)

Radnor 4043 is a great choice for the welding of heat-treatable base alloys and more specifically the 6XXX series alloys. It has a lower melting point and more fluidity than the 5XXX series filler alloys and is preferred by welders because of its favorable operating characteristics. ER4043 type wires are also less sensitive to weld cracking with the 6XXX series base alloys. Radnor 4043 is suitable for sustained elevated temperature service, i.e. above 150° F.

  • UPC: 725177796494
  • ASIN: B00O0W6ENQ
  • Brand: Radnor
  • Size: 15/32"
  • Manufacturer: Radnor