WEN 423DPV 3-Inch Cast Iron Drill Press Vise

WEN 423DPV 3-Inch Cast Iron Drill Press Vise

Remember when your workpiece clung tightly to your table top? The WEN 3-Inch Cast Iron Drill Press Vise clinches woods, metals, plastics and more, holding workpieces firmly in place for safe and accurate drilling. The heavy cast iron base along with the four onboard mounting slots provide stability to the vise during operation. The 3-inch jaws open up a total of 3-1/10 inches with a 1-inch throat depth to tightly grip boards and metals of a variety of shapes. The WEN 3-Inch Drill Press Vise is compatible with the majority of drill press tables on the market (including the WEN 4208, 4210, 4212, 4214, 4225, and 4227 drill presses). Never worry about your workpieces budging again with the WEN 3-Inch Cast Iron Drill Press Vise. Remember when you could drill holes safely and accurately? Remember WEN.

  • UPC: 044459423461
  • ASIN: B019KTKS9Y
  • Brand: WEN
  • Size: 3" Drill Press Vise
  • Manufacturer: Great Lakes Tool MFG INC

Jancy Holemaker II Portable Magnet-Base Drill, 120V, 11.5 Amp Motor, 1-3/8" Diameter x 2" Depth Capacity

Jancy Holemaker II Portable Magnet-Base Drill, 120V, 11.5 Amp Motor, 1-3/8" Diameter x 2" Depth Capacity

The Slugger by FEIN JHM Holemaker II mag drills offer dependability and safety. Only Slugger by FEIN offers integrated safety shields and "Smart magnet" circuitry that does not allow the drill motor to turn on in unsafe magnetic holding conditions. Smart Magnet circuitry will also shut down the drill motor in the unlikely case of the drill breaking away from the workpiece. The Slugger by FEIN Holemaker II portable magnetic drill is made in the USA and comes with a 1 year factory warranty plus a 2 year extended warranty if tool is registered on our website.

  • ASIN: B003EYVE3G
  • Brand: Jancy
  • Manufacturer: Jancy Engineering

3/16" ID x 5/16" OD x 1/4" L Type H Head Press Drill Bushing; All American C1144 Steel Made in USA H20-4-3/16

3/16" ID x 5/16" OD x 1/4" L Type H Head Press Drill Bushing; All American C1144 Steel Made in USA H20-4-3/16

Made In The USA. Material: Grade C1144 Steel Heat Treated to Rockwell C62-64. Type "H" Head Press Fit Stand Drill Bushing are preferable where heavy axial loads may force a headless bushing out of the jig plate. These bushings are similar to type "P" bushings, but have a head/shoulder. Flush mounting is possible by counterboring jig hole to fit bushing head. *Picture shown are for illustration purposes only. Actual product will vary according to drill bushing size. All American Drill Bushing are made in the USA from steel obtained from a domestic steel foundry. Our standard bushings are made of C1144 and heat treated to Rockwell C62-64. Concentricity is held at 0 to .0003 T.I.R maximum for ID sizes of 1/8 to 1/2 and 0 to .0005 T.I.R Max for any other size. A blended Radius on the drill entrance improves drill entry and alignment which prevents tool wear and breakage. All of our products are free of conflict materials of any kind and conform to Reach.

  • ASIN: B07QLMXY63
  • Brand: All American Drill Bushings
  • Manufacturer: All American Drill Bushings

Irwin Industrial Tools 80181 Drill Bit Set, 60-Piece

Irwin Industrial Tools 80181 Drill Bit Set, 60-Piece

This IRWIN 60-Piece General Purpose HSS Wire Gauge Straight-Shank Jobber-Length Drill Bit Set includes drill bits engineered with premium high-speed steel in a bright finish for durability. The 118° chisel-point tip is designed for general purpose applications and drills exact-sized holes for tapping applications. Use these drill bits for automotive, maintenance and repair, portable drills and stationary drill press applications.

  • UPC: 799621074391
  • ASIN: B001VND9EE
  • Brand: Irwin Tools
  • Size: 60pc Metal Index
  • Manufacturer: IRWIN

9/16" ID x 7/8" OD x 3/4" L Type"P" Headless Press Drill Bushing; All American C1144 Steel Made in USA P56-12-9/16

9/16" ID x 7/8" OD x 3/4" L Type"P" Headless Press Drill Bushing; All American C1144 Steel Made in USA P56-12-9/16

Made In The USA. Material: Grade C1144 Steel Heat Treated to Rockwell C62-64. Designated as Type "P", Headless Press Fit Bushings are the least expensive and most popular drill bushings. Generally used in single step drilling. Pressed flush in the fixture plate, they can be spaced closer together than other types of bushings. *Picture shown are for illustration purposes only. Actual product will vary according to drill bushing size. All American Drill Bushing are made in the USA from steel obtained from a domestic steel foundry. Our standard bushings are made of C1144 and heat treated to Rockwell C62-64. Concentricity is held at 0 to .0003 T.I.R maximum for ID sizes of 1/8 to 1/2 and 0 to .0005 T.I.R Max for any other size. A blended Radius on the drill entrance improves drill entry and alignment which prevents tool wear and breakage. All of our products are free of conflict materials of any kind and conform to Reach.

  • UPC: 783976848738
  • ASIN: B07QNYJYH3
  • Brand: All American Drill Bushings
  • Manufacturer: All American Drill Bushings

SHOP FOX W1669 1/2-Horsepower Benchtop Radial Drill Press

SHOP FOX W1669 1/2-Horsepower Benchtop Radial Drill Press

  • UPC: 754001016699
  • ASIN: B001R23SOA
  • Brand: Shop Fox
  • Manufacturer: Shop Fox

CO-Z 5pcs Hss Cobalt Multiple Hole 50 Sizes Step Drill Bit Set with Aluminum Case

CO-Z 5pcs Hss Cobalt Multiple Hole 50 Sizes Step Drill Bit Set with Aluminum Case

Specifications Item Type: Step Drill Size: #1: 3/16" to 1/2" 6 Steps (3/16'', 1/4'', 5/16", 3/8'', 7/16'', 1/2'') #2: 1/8" to 1/2" 13 Steps (1/8", 5/32", 3/16'', 7/32", 1/4'', 9/32", 5/16", 11/32", 3/8'', 13/32", 7/16'', 15/32", 1/2'') #3: 1/4" to 3/4'' 9 Steps (1/4'', 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4") #4: 1/4" to 1-3/8" 10 Steps (1/4'', 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8") #5: 3/16" to 7/8" 12 Steps (1/4'', 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8")" Features 1. Cobalt added reduces friction and lasts longer than those which does not contain cobalt bits. 2. High speed steel for longer service life. 3. Double cutting blades design enables a faster and smoother cutting. 4. Automatically deburrs holes while drilling 5. 3-sided shank prevents slip in drill chuck 6. Includes a protective aluminum case to make the drills not easy to dull. 7. The sharpness and titanium coating ensure easily cut through most sheet metal, plastic and of course wood and some other materials with ease. Package 5x Step Drill Bit Set 1x Aluminum Case.

  • UPC: 640674583197
  • ASIN: B0177PN6SI
  • Brand: CO-Z
  • Manufacturer: CO-Z

InSinkErator STS-00 Dual Outlet SinkTop Switch, Chrome & White

InSinkErator STS-00 Dual Outlet SinkTop Switch, Chrome & White

Easy to reach sink top switch, convenient alternative to a wall switch, the stylist sink top switch is air activated & easily mounts to the sink or counter top, perfect for Island installations & works with any disposer, unique 2 outlet design makes it a great power source for a hot water dispenser, kit includes chrome & white finishes to match most decors.

  • UPC: 050375006527
  • ASIN: B000BQO9XM
  • Brand: InSinkErator
  • Size: Single
  • Manufacturer: InSinkErator

EZ-POUR B00YP3YTXM Replacement Water Jug Or Gas Can Spout-Deluxe Hi-Flo System with Extension, Pack of 1

EZ-POUR B00YP3YTXM Replacement Water Jug Or Gas Can Spout-Deluxe Hi-Flo System with Extension, Pack of 1

High flow water replacement spout and vent kit 8" Spout extension for those hard to reach tanks 1/2" Replacement push in vent second base cap to fit Additional cans. Product is manufactured in United States. This product meets customer requirement.

  • UPC: 827165671964
  • ASIN: B00YP3YTXM
  • Brand: EZ-Pour
  • Size: Pack of 1
  • Manufacturer: EZ-POUR

Palmgren 10 2.5-Inch Drill Press Vise, Dark Grey

Palmgren 10 2.5-Inch Drill Press Vise, Dark Grey

These versatile drill press vises set the industry standard. They are what you need for drilling, tapping, reaming, spot-facing, counter boring, and Countersinking operations. They are available in sizes ranging from 1-1/2 in through 6 in. All these vises can be mounted on base, either side, or placed on the end for general use. This original design is used in all Industries everywhere. This USA made vise has a lifetime guarantee.

  • UPC: 726896122519
  • ASIN: B0006N8CV0
  • Brand: Palmgren
  • Size: 2.5-Inch
  • Manufacturer: Palmgren