Anvil Concrete Pool Deck Stain, 100% Acrylic Paint, Waterproof Coating, 4 Solid Colors Available, Adobe, 5 Gallons

Anvil Concrete Pool Deck Stain, 100% Acrylic Paint, Waterproof Coating, 4 Solid Colors Available, Adobe, 5 Gallons

Uses, Features & Benefits: Anvil Pool Deck Paint is a 100% Acrylic Coating formulated to form a protective and decorative surface to concrete pool decks. Anvil Pool Deck Coating may be applied to unpainted concrete or over old paint if it is properly bonded to the surface. Pool Deck Coating is formulated to be highly resistant to the pool chemical environment. Its solid color, eggshell sheen brings new life to concrete pool decks. Surface Preparation: Proper surface preparation will ensure maximum adhesion, durability, and uniform coloration. For best performance and lasting durability, thoroughly clean pool deck with Anvil Concrete and Masonry Cleaner and Etch #1450 then prime with Anvil High Adhesion Grip-Tite WB Bonding Primer #1750 prior to application. New concrete should be at least 45 days old, prior to coating to reduce the possibility of the occurrence of efflorescence. Some surfaces such as inclined and wet areas may require a slip resistant additive for safety. Easy Application: Hand stir product thoroughly before application. To ensure uniform color, all containers of the same color must be intermixed and stirred periodically during application. Apply in two thin coats by brush, roller or spray. Avoid heavy application. Covers at a rate of 200 sq. ft. per coat per gallon depending on type of surface and porosity.

  • UPC: 760428902750
  • ASIN: B00ENN0BPY
  • Brand: Anvil Paints & Coatings
  • Size: 5 Gallon
  • Manufacturer: Anvil Paints

Anvil Deck-A-New Resurfacer Paint, Restores Wood Decks, Porches, Concrete Patios & Pool Decks, Premium Textured, 5 Slip Resistant Colors Available - Butternut, 5 Gallons

Anvil Deck-A-New Resurfacer Paint, Restores Wood Decks, Porches, Concrete Patios & Pool Decks, Premium Textured, 5 Slip Resistant Colors Available - Butternut, 5 Gallons

Uses, Features & Benefits: Anvil Deck-A-New Wood & Concrete Textured Resurfacer is an eco-friendly rejuvenator coating for weathered or damaged wood and concrete surfaces. Deck-A-New's beautiful textured solid color finish repairs, structurally sound, wooden and composite decks, concrete patios, pool decks, walkways steps and porches while offering maximum protections to preserve the surface for years. The coating encapsulates splinters and fills cracks delivering a beautiful slip resistant finish that is scuff, peel and chip resistant. Protect both interior/exterior vertical/horizontal wood and concrete surfaces with lasting durability. Wooden Surfaces: replace rotting or unstable decking boards and remove all loose splinters. Clean the surface to remove mildew, dirt, and oil prior to application. Level all nail or screw heads. Use Anvil Aqua Seal Waterproofer Bonding Primer #235. Concrete Surfaces: remove all dirt, efflorescence, grease, oil, waxes, silicone products, and other foreign material that would interfere with the adhesion of Deck-A-New. Un-coated smooth steel-toweled concrete floors (floors with no porosity) must be totally cured, and cleaned with Anvil Clean & Etch #1450. Easy Application: For best results, must apply two coats by brush, roller or texture sprayer. For normal aged wood, composite or concrete decks use a synthetic roller with a 3/8 inch nap. For extremely weathered, cracked and damaged wood decks, apply with a nylon-loop textured roller. Apply product at a rate of 120 to 160 sq. ft. per gallon, depending on porosity (60-80 sq.ft. in two coats).

  • UPC: 760428956159
  • ASIN: B00H56WBN6
  • Brand: Anvil Paints & Coatings
  • Size: 5 Gallon
  • Manufacturer: Anvil Paints

KILZ Over Armor Textured Wood/Concrete Coating, 1 gallon, Slate Gray

KILZ Over Armor Textured Wood/Concrete Coating, 1 gallon, Slate Gray

Over Armor offers an innovative, waterproofing solid color coating that brings old, weathered wood or concrete back to life with an advanced and durable 100% acrylic resin surface. This solid color, textured coating bridges cracks, hides imperfections, and gives a uniform look to old, weathered wood and concrete. Use on weathered or cracked horizontal or vertical wood and composite surfaces such as decks, porches and boat docks, or railings as well as concrete surfaces like pool decks, patios and sidewalks. Over Armor is designed to conceal splinters and cracks up to 1/4-inch and creates a textured slip-resistant finish. This is a 1-gallon can of KILZ Over Armor Textured Surface Coating in Redwood. Covers approximately 75 square feet per gallon. Not for drivable surfaces such as garage floors or driveways. All surfaces must be clean, sound, dry and free of any dirt, oil, and grease before application. Two (2) coats are required for optimal durability. Brush, roll, or spray on. Wait 4-6 hours before recoating and 72 hours for full cure. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

  • UPC: 051652007589
  • ASIN: B06XPYYLT6
  • Brand: Kilz
  • Size: 1 Gallon
  • Manufacturer: KILZ