MAXZONE Automatic Submersible Boat Bilge Water Pump 12v 1100gph Auto with Float Switch (Blue - Automatic)

MAXZONE Automatic Submersible Boat Bilge Water Pump 12v 1100gph Auto with Float Switch (Blue - Automatic)

✔Compact, automatic, fully submersible electric pump ✔Built-in float switch! (No separate float switch is needed) ✔Equipped with built in electronic controlled reed sensor system for easy fully automatic operation ✔No power use until pump is activated by internal float switch (when water level rises) ✔Compact, efficient, long life motor ✔Rustproof and corrosion resistant ✔Stainless steel shaft ✔High-impact durable plastic housing ✔Quick release strainer for easy maintenance ✔Extremely efficient, very low current ✔Draw and offer high capacity output ✔Water cooled long-life motors ✔Ignition protection to protect the pump against high current ✔Water/moisture tight seals ✔Silent and vibrationless operation ✔Anti-airlock protection ✔Will not burn out when run dry ✔Integrated float switch TEST button at rear of unit ✔Can be used with switch panel for manual override ✔Includes comprehensive user manual with installation instructions and wiring diagram

  • UPC: 191094860349
  • ASIN: B072JKFV9Z
  • Brand: MAXZONE
  • Manufacturer: Sailflo

Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500

Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500

In the next generation sensing bilge pumps, the 500 GPH S-Series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes. Water is kept in check between 1/8" and 3/8". Improved design and performance means that our new 500 GPH pump will produce this flow at just 12 volts rather than 13.6 volts as previously required, more typical of on board voltage supply. Our next generation of Rule pumps include check valves and to do this we've created a hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks. We have true electromagnetic suppression (EMC) and have a built-in thermal cell that protects the pump and the vessel when things get too hot. These are the smallest automatic pumps on the market.

  • UPC: 042237104786
  • ASIN: B01LZSYF42
  • Brand: Rule
  • Size: 500 GPH
  • Manufacturer: Rule

attwood 4505-7 Sahara S500 Automatic Bilge Pump, 12-Volt, 1.5-Amp Draw, ¾-Inch Interior Diameter Hose, 29-Inch 16-Gauge Wire

attwood 4505-7 Sahara S500 Automatic Bilge Pump, 12-Volt, 1.5-Amp Draw, ¾-Inch Interior Diameter Hose, 29-Inch 16-Gauge Wire

This Attwood Sahara S500 Automatic Bilge Pump provides reliable bilge water pumping for boats of any size. This pump meets the requirement of an automatic-switch bilge pump for any vessels 20 feet and over with sleeping accommodations, and it is convenient and dependable for a boat of any size. This pump is a compact and durable package that includes the pump, wire seals, strainer, and mercury-free switch all in one unit that installs quickly and easily in tight spaces. It mounts horizontally only. This 12-volt, 1.5-amp draw pump is rated for 500 GPH performance at open flow (at voltage of 13.6 volts DC), and it draws only 1.5 amps at open flow. It comes with a 29-inch length of 16-gauge caulked and tinned copper wire, and uses a ¾-inch interior diameter hose. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing of the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.

  • UPC: 012300701815
  • ASIN: B001O0DEDU
  • Brand: attwood
  • Size: Unspecified
  • Manufacturer: Attwood

Rule 35A Rule-A-Matic Bilge Pump Float Switch, Mercury Free

Rule 35A Rule-A-Matic Bilge Pump Float Switch, Mercury Free

Designed for pumps drawing up to 14 AmpsIncludes a 2 year warrantyDimensions (L x W x H) 4-1/2 inches L x 1-1/2 inches W x 2 inches H, 114 L x 38 Wx 51 H (mm)

  • UPC: 014445389231
  • ASIN: B000O8DA3M
  • Brand: Rule
  • Manufacturer: Rule

Rule-Mate RM2000A Automated Bilge Pump, No Float Switch Required, 2000 GPH, 12 Volt , White/Blue

Rule-Mate RM2000A Automated Bilge Pump, No Float Switch Required, 2000 GPH, 12 Volt , White/Blue

When water enters the bilge and reaches a certain height, 2-3/4" (70mm), a sensor turns the pump on. After the water is pumped out, another sensor shuts the pump off. The sensors’ unique “field effect” technology is environment friendly because they only sense the dielectric constant of water. In the event of an onboard oil spill, straight motor oil that enters the bilge will not turn the pump on. Please note that this is not an oil overspill system or a safety measure device.

  • UPC: 042237085887
  • ASIN: B000O89CWK
  • Brand: Rule
  • Size: 12 Volt
  • Manufacturer: Rule

CarBole Universal Automatic Bilge Pump Float Switch for Boats Bilge Pump Auto Marine

CarBole Universal Automatic Bilge Pump Float Switch for Boats Bilge Pump Auto Marine

Description: Turn pump on when water level reaches 2" (51mm); turn pump off when water level reaches 3/4" (19mm)This product should be used with recommended size fuse for the pump to which it is connectedNot to be used with 110V applicationsPeriodically clean any accumulated debris from around the switch or integral switch guard. this will allow free flow of water to the floatFeatures:Long life, switching frequency up to 10 million times Ultrasonic welding, forming a seal, reliable and secure, not leaking Shells made of high quality ABS material, the internal metal contacts to ensure reliable start / stopNot to be used with AC voltage applications Ideal flow sensor for bilge pumpsLatest design includes a removable base for easy cleaning and servicingHeavy duty flow switch is designed for the toughest applicationsSpecificationMax Amps 12volts 20A Max Amps 24volts 10AMax Amps 32volts 8AWire Length 1mWire Gauge Size 18

  • ASIN: B07BQ1KTX4
  • Brand: CarBole
  • Manufacturer: CarBole

Wayne 57729-WYN1 EEAUP250 1/4 HP Automatic ON/OFF Electric Water Removal Pump

Wayne 57729-WYN1 EEAUP250 1/4 HP Automatic ON/OFF Electric Water Removal Pump

Plug in and leave the pump unattended for worry-free water removal. Ideal for crawl spaces, flat roofs, window wells and other problem areas around the home where water accumulates. Troubleshooting: Primary causes for malfunction impacting the automatic switching function: o A clogged vent hole (small debris, seeds, pine needles) o A contaminated switch housing (algae, slime or other materials accumulated on the switch underside).

  • UPC: 784497694651
  • ASIN: B00502AIUU
  • Brand: Wayne
  • Size: 1
  • Manufacturer: Wayne Water Systems

Rule 02 Marine Bilge Pump, 1500 GPH, Non-Automatic, 12 Volt

Rule 02 Marine Bilge Pump, 1500 GPH, Non-Automatic, 12 Volt

Rule Submersible Bilge Pumps have set the standard for the industry for decades. They are the first choice of yachtsmen and fishermen throughout the world. More innovations in bilge pump design have come from Rule Industries than any other manufacturer, and they are proud to offer the broadest range of bilge pumps in the world.Pump and switch are stand-alone productsCompact, efficient, long-life motorsLimited three-year warrantyAbility to run dry for short periodsEasy-clean, snap-lock strainer basesStainless steel shaftsCompletely submersibleMarine-grade blocked wiringRust and corrosion protectionSilent and vibrationless operationCE and ISO 8849 certificationIgnition protectionTraditional operation activated by a float switch and/or panel switch, providing an extra level of security and protectionRemove the motor by pushing the side tabs, allowing easy access to clean the strainer and the impeller cavity

  • UPC: 662347272702
  • ASIN: B000O8B6DI
  • Brand: Rule
  • Size: 1500 GPH
  • Manufacturer: Rule

TeraPump TRHA01 Battery Operated Liquid Transfer Pump - 2AA Battery, 2.25 GPM

TeraPump TRHA01 Battery Operated Liquid Transfer Pump - 2AA Battery, 2.25 GPM

The Liquid Transfer Pump is battery operated and uses only 2 AA batteries (not included). This automatic pump is high powered and is portable and light weight. You can pump 10 quarts of liquid per minute. Just switch on to start transferring liquid from one receptacle to another. You can easily empty containers with the Liquid Transfer Pump. It is useful in the garage, basement, bathroom, shop and yard. TeraPump pumps any non-corrosive liquid, such as gas, water(not for drinking water), and oil.

  • UPC: 689466610956
  • ASIN: B00APU2X0K
  • Brand: TERA PUMP
  • Size: 1-Pump
  • Manufacturer: Tera Pump

Rule 500 GPH 25DA Standard Bilge Pump-500

Rule 500 GPH 25DA Standard Bilge Pump-500

Customers talk about flow, they want the water out of the bilge, and fast. Improved design and performance means that our new 500 GPH pump will produce this flow at just 12 volts rather than 13.6 volts as previously required, more typical of on board voltage supply. Our next generation of Rule pumps include check valves and to do this we've created a hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks. We have true electromagnetic suppression (EMC) and have a built-in thermal cell that protects the pump and the vessel when things get too hot. We’ve re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we’re just getting started.

  • UPC: 042237104717
  • ASIN: B01LZ5HQ2W
  • Brand: Rule
  • Size: 500 GPH
  • Manufacturer: Rule