MAXZONE Automatic Submersible Boat Bilge Water Pump 12v 1100gph Auto with Float Switch (Blue - Automatic)

MAXZONE Automatic Submersible Boat Bilge Water Pump 12v 1100gph Auto with Float Switch (Blue - Automatic)

✔Compact, automatic, fully submersible electric pump ✔Built-in float switch! (No separate float switch is needed) ✔Equipped with built in electronic controlled reed sensor system for easy fully automatic operation ✔No power use until pump is activated by internal float switch (when water level rises) ✔Compact, efficient, long life motor ✔Rustproof and corrosion resistant ✔Stainless steel shaft ✔High-impact durable plastic housing ✔Quick release strainer for easy maintenance ✔Extremely efficient, very low current ✔Draw and offer high capacity output ✔Water cooled long-life motors ✔Ignition protection to protect the pump against high current ✔Water/moisture tight seals ✔Silent and vibrationless operation ✔Anti-airlock protection ✔Will not burn out when run dry ✔Integrated float switch TEST button at rear of unit ✔Can be used with switch panel for manual override ✔Includes comprehensive user manual with installation instructions and wiring diagram

  • UPC: 191094860349
  • ASIN: B072JKFV9Z
  • Brand: MAXZONE
  • Manufacturer: Sailflo

Rule 02 Marine Bilge Pump, 1500 GPH, Non-Automatic, 12 Volt

Rule 02 Marine Bilge Pump, 1500 GPH, Non-Automatic, 12 Volt

Rule Submersible Bilge Pumps have set the standard for the industry for decades. They are the first choice of yachtsmen and fishermen throughout the world. More innovations in bilge pump design have come from Rule Industries than any other manufacturer, and they are proud to offer the broadest range of bilge pumps in the world.Pump and switch are stand-alone productsCompact, efficient, long-life motorsLimited three-year warrantyAbility to run dry for short periodsEasy-clean, snap-lock strainer basesStainless steel shaftsCompletely submersibleMarine-grade blocked wiringRust and corrosion protectionSilent and vibrationless operationCE and ISO 8849 certificationIgnition protectionTraditional operation activated by a float switch and/or panel switch, providing an extra level of security and protectionRemove the motor by pushing the side tabs, allowing easy access to clean the strainer and the impeller cavity

  • UPC: 662347272702
  • ASIN: B000O8B6DI
  • Brand: Rule
  • Size: 1500 GPH
  • Manufacturer: Rule

attwood 4505-7 Sahara S500 Automatic Bilge Pump, 12-Volt, 1.5-Amp Draw, ¾-Inch Interior Diameter Hose, 29-Inch 16-Gauge Wire

attwood 4505-7 Sahara S500 Automatic Bilge Pump, 12-Volt, 1.5-Amp Draw, ¾-Inch Interior Diameter Hose, 29-Inch 16-Gauge Wire

This Attwood Sahara S500 Automatic Bilge Pump provides reliable bilge water pumping for boats of any size. This pump meets the requirement of an automatic-switch bilge pump for any vessels 20 feet and over with sleeping accommodations, and it is convenient and dependable for a boat of any size. This pump is a compact and durable package that includes the pump, wire seals, strainer, and mercury-free switch all in one unit that installs quickly and easily in tight spaces. It mounts horizontally only. This 12-volt, 1.5-amp draw pump is rated for 500 GPH performance at open flow (at voltage of 13.6 volts DC), and it draws only 1.5 amps at open flow. It comes with a 29-inch length of 16-gauge caulked and tinned copper wire, and uses a ¾-inch interior diameter hose. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing of the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.

  • UPC: 012300701815
  • ASIN: B001O0DEDU
  • Brand: attwood
  • Size: Unspecified
  • Manufacturer: Attwood

SeaSense Hand Bilge Pump Hose, 24 X 36-Inch

SeaSense Hand Bilge Pump Hose, 24 X 36-Inch

This gorgeous SeaSense hand bilge pump 24in length x 36in Hose has the finest details and highest quality you will find anywhere! SeaSense hand bilge pump 24in length x 36in Hose is truly remarkable. Product details: • condition: brand new • item SKU: ss-sms-5001555 • information: the SeaSense hand bilge pump is a self-priming hand pump which was designed in conjunction with the Agricultural industry for large scale water removal. This same design has been scaled down for evacuating small boats, canoes, kayaks, bilges or any place water collects. Anti-leak design has a removable 36 inch Hose for easy storage. The high impact handle is ergonomic with an easy grip. Plunger spacer keeps the shaft from coming up too far and damaging the plunger washer.

  • UPC: 737765023233
  • ASIN: B000FZ346W
  • Brand: SeaSense
  • Size: 24 X 36-Inch
  • Manufacturer: 3M

attwood 4511-7 Sahara S1100 Automatic Bilge Pump, 1100 GPH, 12-Volt, 1.5-Amp Draw, ¾-Inch Interior Diameter Hose, 29-Inch Wire

attwood 4511-7 Sahara S1100 Automatic Bilge Pump, 1100 GPH, 12-Volt, 1.5-Amp Draw, ¾-Inch Interior Diameter Hose, 29-Inch Wire

This Attwood Sahara S1100 Automatic Bilge Pump provides reliable bilge water pumping for boats of any size. This pump meets the requirement of an automatic-switch bilge pump for any vessels 20 feet and over with sleeping accommodations. This S1100 model is high-capacity for larger boats and yachts. This pump is a compact and durable package that includes the pump, wire seals, strainer, and mercury-free switch all in one unit that installs quickly and easily in tight spaces. It mounts horizontally only. This 12-volt, 1.5-amp draw pump is rated for 1,100 GPH performance at open flow (at voltage of 13.6 volts DC), and it draws only 1.5 amps at open flow. It comes with a 29-inch length of 16-gauge caulked and tinned copper wire, and uses a ¾-inch interior diameter hose. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing of the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.

  • UPC: 611104318313
  • ASIN: B001O0DEEY
  • Brand: attwood
  • Size: Unspecified
  • Manufacturer: Attwood

Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500

Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500

In the next generation sensing bilge pumps, the 500 GPH S-Series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes. Water is kept in check between 1/8" and 3/8". Improved design and performance means that our new 500 GPH pump will produce this flow at just 12 volts rather than 13.6 volts as previously required, more typical of on board voltage supply. Our next generation of Rule pumps include check valves and to do this we've created a hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks. We have true electromagnetic suppression (EMC) and have a built-in thermal cell that protects the pump and the vessel when things get too hot. These are the smallest automatic pumps on the market.

  • UPC: 042237104786
  • ASIN: B01LZSYF42
  • Brand: Rule
  • Size: 500 GPH
  • Manufacturer: Rule

Rule 10 Marine Bilge Pump, 2000 Gallon Per Hour, Non-Automatic, 12 Volt DC , White/Blue

Rule 10 Marine Bilge Pump, 2000 Gallon Per Hour, Non-Automatic, 12 Volt DC , White/Blue

Rule Submersible Bilge Pumps have set the standard for the industry for decades. They are the first choice of yachtsmen and fishermen throughout the world. More innovations in bilge pump design have come from Rule Industries than any other manufacturer, and they are proud to offer the broadest range of bilge pumps in the world.Pump and switch are stand-alone productsCompact, efficient, long-life motorsLimited three-year warrantyAbility to run dry for short periodsEasy-clean, snap-lock strainer basesStainless steel shaftsCompletely submersibleMarine-grade blocked wiringRust and corrosion protectionSilent and vibrationless operationCE and ISO 8849 certificationIgnition protectionTraditional operation activated by a float switch and/or panel switch, providing an extra level of security and protectionRemove the motor by pushing the side tabs, allowing easy access to clean the strainer and the impeller cavity

  • UPC: 731215041600
  • ASIN: B000O89BCQ
  • Brand: Rule
  • Size: 2000 GPH
  • Manufacturer: XYLEM FLOW CONTROL LLC

SEAFLO Submersible Automatic Bilge Pump with Float Switch (750GPH, 12V)

SEAFLO Submersible Automatic Bilge Pump with Float Switch (750GPH, 12V)

IntroductionMeet SEAFLO's brand new, patent-pending design, automatic fully submersible bilge pump. This bilge pump efficiently and effectively removes boat bilge water. No seperate float switch is needed thanks to the built-in magnetic reed float switch! No power use until the pump is activated by the internal float switch. New design allows for easy maintenance and servicing without having to disconnect hosing or unscrew strainer base.  All SEAFLO products also come with a 4-Year Limited Warranty! DetailsCompact design for small spacesEquipped w/ built-in electronic controlled reed sensor system for fully automatic operationRustproof and corrosion resistant with a stainless steel shaft High-impact durable plastic housingQuick release strainer for easy maintenance and servicingIgnition protection to protect the pump against high currentWater/moisture tight sealsSilent and vibrationless operation Anti-airlock protection Will not burn out when run dry Includes comprehensive user manual with installation instructions and wiring diagram  Technical specificationsModel: SFBP1-G750-11Flow Rate: 750 GPH Voltage: 12V Max Draw: 5A Head: 10.8' (3.3m) Wire Lead: 3' (1m) Outlet Diameter: 3/4" Weight: 1.03 lbs Dimensions: Approx. 6.5" x 3.27" x 4.13"

  • UPC: 647336949629
  • ASIN: B07Q2F9QZ5
  • Brand: SEAFLO
  • Size: 750GPH
  • Manufacturer: SEAFLO

Shoreline Marine Bilge Pump 800 GPH

Shoreline Marine Bilge Pump 800 GPH

Shoreline Marine bilge pumps are made with quality components to last. Tinned wire make this a bilge to use in many conditions, can be wired to a switch at the console or a float switch.

  • UPC: 675904228883
  • ASIN: B004LR7H7C
  • Brand: Shoreline Marine
  • Size: 800 GPH 3/4"
  • Manufacturer: Shoreline Marine

Shoreline Marine Plumbing Kit 3/4" X 5' Hose

Shoreline Marine Plumbing Kit 3/4" X 5' Hose

The Shoreline Maine Bilge Pump Plumbing Kit comes complete with a 5’ reinforced ¾” ID bilge hose, one ¾” Thru-Hull fitting and two Stainless Steel hose clamps. The corrugated hose is segmented into 1 foot sections with a smooth area every foot. The smooth areas are meant for cutting the hose down to a shorter length for individual applications.  This design allows the hose ends to fit tightly over the bilge pump outlet and the thru-hull fitting barb while the corrugated sections stop it from kinking.   * MUST BE USED WITH A BILGE PUMP EQUIPED WITH A ¾” OD OUTLET BARB ONLY – VERIFY BILGE PUMP DEMENSIONS BEFORE PURCHASE.

  • UPC: 013893522535
  • ASIN: B004UOUBW4
  • Brand: Shoreline Marine
  • Size: One Size
  • Manufacturer: Big Game International