Taprite T742HP Primary Double Gauge CO2 Regulator, Brass
Taprite T742HP Primary Double Gauge CO2 Regulator, Brass
WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING. You can use this low-pressure regulator on any CO2 tank with a CGA-320 valve. CO2 tanks have a male thread (CGA-320); these regulators have a female thread. This regulator features dual gauges to measure psi as well as the volume of CO2 in the cylinder, indicating how much CO2 is left in the cylinder and when you should have it refilled. The knob on the front is used to adjust the output pressure. The red polycarbonate bonnet will not chip, break or fade. There is a non-adjustable shut down built into the body of the regulator. The high-pressure ports have left-hand female threads to prevent their use as a low-pressure outlet. The non-removable adjusting screw is designed so that when it is turned all the way in the maximum downstream delivery pressure will not exceed 50psi, with a safety blow off at 60psi. Internal relief valve opens whenever delivery pressure exceeds set pressure by 15psi. This feature serves as a warning that the seat or diaphragm may be worn or damaged and should be replaced. Sintered metal flow control filter in the inlet nipple to prevent dirt and other particles from damaging internal regulator parts. The permanent Quad-Ring Seal on the inlet nipple helps eliminate a source of leaks, so there is no need to use a new fiber washer each time the tank is changed. Outlet features NADS 1600C shutoff which eliminates a source of gas leaks. The duck bill check valve helps prevent product back up into the regulator, a common cause of malfunction in the regulating and relief valve parts. Hose barb end designed for use with 5/16 inch I.D. pressure tubing. All regulators are pressure tested to assure in-field reliability. The seat assembly is easily replaceable, so there is no need to remove the regulator from the tank. Bullets change to: Low pressure gauge (the top gauge) indicates... [Read More]
- UPC: 608866314523
- ASIN: B002UZUJ22
- Brand: Taprite
- Manufacturer: Taprite
Aquarium CO2 Regulator with Solenoid 110V-Mini Dual Gauge Display Bubble Counter,Check Valve Fits Standard US Tanks-Accurate and Easy to Adjust (HP2000PSI,LP150PSI) Flow Meter
Aquarium CO2 Regulator with Solenoid 110V-Mini Dual Gauge Display Bubble Counter,Check Valve Fits Standard US Tanks-Accurate and Easy to Adjust (HP2000PSI,LP150PSI) Flow Meter
The aquarium CO2 regulator from DoubleSun is a helpfull assistant to create a water forest.It is compatible with most of high density tubing to inject your aquarium with CO2 quickly and easily. It also works well with most CO2 atomizers and diffusers.The solenoid valve is energy-saving silence and low temperature.The color and size is suitable that can harmony with the aquatic environment.Long outline let it more freedom.Strong and durable material is specifically designed for you.The plant metabolic rate can be increased quickly,create the best growing conditions.SpecificationGas service: CO2Size: 4.5*4.5 inchColor: luxury goldWeight: 16.94 onceOutline length: 76 inchInlet gauge: 2000 PSIOutlet gauge: 150 PSIMax. inlet pressure: 1500 PSIMax. outlet pressure: 45 PSIVoltage: 110VInlet connection:CGA320You will recieve a box that the size is 9.1*6.7*3.5 inch ,the weight is 24.36 once:1. A piece of the finished aquarium CO2 regualator:Bubble Counter:Flow-rate of CO2 gas indication device.Check Valve:Prevent water flow back into the regulator.Solenoid Valve:To control the on-off of CO2 supplication use with a timer to control it.High Pressure Gauge:Show the pressure of cylinder,and check the volume of remaining CO2.Low Pressure Gauge:Show the output pressure.2. Detailed instructions for use:Give you some safety instructions.3. Tighten tool:Install the aquarium CO2 regulator easily with wrench.4. Extra seal ring:Better tightness and refused to air leakage.WARNING: It still needs to take 3-5mins to release all of the gas remained in the regulator, when the solenoid valve is power off. OR you can release the gas quickly by control micro-adjustable valve.
- UPC: 710280938510
- ASIN: B07F7P8TL3
- Brand: DoubleSun
- Size: Dual Gauge
- Manufacturer: DoubleSun
Titan Controls Carbon Dioxide (CO2) Regulator for 120V Controllers & Timers
Titan Controls Carbon Dioxide (CO2) Regulator for 120V Controllers & Timers
Compatible with Titan Controls CO2 Controllers or other 120 Volt controllers and timers. Precision accuracy flow meter - 0.5 to 15 SCF/hour. Features heavy-duty solenoid valve. High quality oil-less pressure gauge. Includes two plastic tank washers and 12 ft of CO2 dispensing line. Brass construction for long-lasting dependability and durability. 1 Amp/120 Volts/60Hz.
- UPC: 870883009359
- ASIN: B004MUDNKS
- Brand: Titan Controls
- Size: 1-(Pack)
- Manufacturer: Sunlight Supply Inc.
Fzone Aquarium CO2 Regulator Triple Stage with DC Solenoid and Bubble Counter Check Valve Compatible Painball Tank CGA320 CO2 Cylinder
Fzone Aquarium CO2 Regulator Triple Stage with DC Solenoid and Bubble Counter Check Valve Compatible Painball Tank CGA320 CO2 Cylinder
FEATURE: -Most Stable regualtor, Which is triple stage decompession structure much more stable than normal pieces or dual stage pieces. -Easier to adjust output pressure from 0 to 60psi by rotating the konb in a single circle. Comparing to others adjust the pressure little by little. -Japanese orginal SMC throttle valve with universal ajusting function makes it compatible with both top opening and side opening tanks. -Painball adapter included, you can used it on painball tank. and it also suite for 5/8 UNF threaded disposable CO2 cartridges and CGA 320 threaded cylinder. -Together with bubble counter, you can read your co2 flow rate. Bubble counter with check valve function, stop water backflow to bottle. All installing tools included, make all goes easy. HOW TO SET? -Before installing, turning the knob anticlockwise to the end(Minimum pressure position). -Installing the regulator the the CO2 tank and make sure the seal ring in right position. -Connect the power(Red indicator light on). -Pull out The the throttle valve and anticlockwise turn it to the end(fine-tuning valve to the maximum positon). -Turn the knob little by little to incease the output pressure, till the bubble rate to be 5-15 bubbles per second. -Turn the throttle valve to adjust flowrate to the speed you need. ATTENTION: Don't turn the output pressure too high, or the throttle valve will be too sensitive to adjust Package included -Regulater x 1. -Power adapter x 1 -Power cable x 1 -Painball adapter x 1 -Installing tools x 2 -seal ring x 1
- UPC: 687765998423
- ASIN: B07SNCQ4WS
- Brand: Fzone
- Manufacturer: Fzone
Gentec 227C-150 Flow Regulator for Light Duty Applications
Gentec 227C-150 Flow Regulator for Light Duty Applications
GENTEC 227C-150 flow regulators are designed for light duty applications using carbon dioxide (CO2) or nitrogen (N2). Preset delivery pressure setting: 150 PSI. "Piston" type mechanism for reliability. Body machined from class "A" brass bar stock. Sintered bronze inlet filter. 1/4" NPT outlet port.
- UPC: 743043016811
- ASIN: B0085EVSOU
- Brand: GTC Direct
- Manufacturer: Genstar Technologies
Learn to Brew Nylon Washers for Co2 Regulators, Set of 6
Learn to Brew Nylon Washers for Co2 Regulators, Set of 6
Replacement washers that go between your regulator and CO2 tank in your draft beer system. Set of 6. Features: Made of plastic nylon. Set of 6. Specs: 3/4"W x 1/8"D. Opening is 1/4"W.
- UPC: 845033006014
- ASIN: B000DZFVDS
- Brand: Learn To Brew LLC
- Manufacturer: Learn To Brew
BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld
BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld
100% Brand New. Color: GoldMaterial: Copper Size: 12cm(L)*7.5cm(W)*16CM(H) Compare the detail sizes with yours, please allow 1-2MM differs due to manual measurement Flow Meters are more accurate than the flow gauge regulators. The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi. The output flow is adjustable from 0- to 25 lpm, and is indicated by a ball which moves up and down in the flow tube, so this flow meter will handle MIG and TIG welding both steel and aluminum. The fitting is a CGA-580 fitting, so it fits all argon, helium, nitrogen, and argon/CO2 mixed gas tanks. This does not fit CO2 cylinders. If you want a CO2 Flowmeter see our auction for those. A very nice thing about this Flow meter is the outlet will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. You can see the adapter in the picture. It comes with a standard 1/4" barbed fitting. If you have a Miller, Lincoln, or Hobart welder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male nut. Package Content: 1 x Argon CO2 Flow meter
- UPC: 745780992786
- ASIN: B01I67VKFW
- Brand: BETOOLL
- Size: 0-4000Psi
- Manufacturer: szbrt
AQUATEK CO2 Regulator Mini
AQUATEK CO2 Regulator Mini
Product features: Connect to paintball CO2 tank, no adapter required. PLEASE NOTE: please fill up your CO2 paintball tank if you purchased the tank online (e.g. Amazon) before using the regulator. The CO2 paintball tank is shipped empty due to safety concern. Cool-touch industrial solenoid design. Precision needle valve for fine tuning release of CO2. Include bubble counter with integrated check valve. Compatible with most CO2 atomizer and diffuser. Compatible with 1/4 or 3/16 inch CO2 gas line and most high density tubing. Bottle Pressure Gauge: 1,500 PSI Max. Reduced Pressure Gauge: 200 PSI Max. 110 and 220 volt universal power design. Heavy duty electronic cabling. The compact space-saving design of Aquatek CO2 Regulator with Integrated Solenoid Valve for Paintball Tank is ideal for smaller set-up of CO2 systems. Eliminate the need to purchase paintball tank adaptor and unsightly industrial-size CO2 tank, this all-in-one unit is perfect for calcium reactor and freshwater plant CO2 injection applications. The Aquatek CO2 Regulator for Paintball Tank is equipped with dual gauges (psi & kg/cm); the left gauge measures tank capacity and the right gauge measures output working pressure. With its fine tuning capabilities and electronic regulation, this CO2 Regulator meets the highest industry quality standard. (PLEASE NOTE: Paintball tank is NOT included, for demonstration purposes only).
- UPC: 661799225946
- ASIN: B008TJCPSY
- Brand: AQUATEK OF CALIFORNIA
- Manufacturer: AQUATEK OF CALIFORNIA
HZXVOGEN Flowmeter Argon Co2 Gas Regulator Tig Mig Welding Pressure Reducer Flow Gauge
HZXVOGEN Flowmeter Argon Co2 Gas Regulator Tig Mig Welding Pressure Reducer Flow Gauge
IMPORTANT NOTE: IF YOU ORDER THIS ITEM SHIPPED FROM CHINA, YOU MAY RECEIVE IT IN 4-7 DAYS. All indications showing this exclamation mark are important safety instructions. 1.Flowmeter complies with all current relevant technical regulations and meets all existing standards. 2.The flowmeter may under no circumstances be modified or tampered with without the written consent of the manufacturer. 3.Intermediary connections between the cylinder valve and the cylinder pressure regulator are strictly forbidden. 4.Incorrect use may endanger the operator and the other personnel, damage to the cylinder pressure regulator and the installation may also result. Operating instructions 1.Keep hands and tool clean, oil and grease can cause an explosion on the contact with oxygen. 2.The operator should be fully familiar with these operating instructions prior to the use of this equipment; all instructions should be adhered to when in use. 3.Check that the flowmeter is suitable to the gas to be used. 4.Check that the cylinder value connection is clean and undamaged, if not, you must not connect cylinder pressure regulator. 5.Before connecting the cylinder pressure regulator, the cylinder valve should be swiftly opened and closed to dislodge water or foreign from the valve/regulator inlet seating. Do not stand in front of the cylinder valve and do not hold your hand before the cylinder valve.
- ASIN: B07LDYYJ28
- Brand: H HZXVOGEN
- Manufacturer: H HZXVOGEN
Grow Crew Hydroponic CO2 Enrichment Kit | Includes 20 lb Aluminum CO2 Tank, Carbon Accelerator CO2 Regulator, Spartan Series Repeat Cycle Timer, and a Active Air Rain System to Shower Your Plants
Grow Crew Hydroponic CO2 Enrichment Kit | Includes 20 lb Aluminum CO2 Tank, Carbon Accelerator CO2 Regulator, Spartan Series Repeat Cycle Timer, and a Active Air Rain System to Shower Your Plants
Grow Crew Hydroponic CO2 Enrichment Kit (Regulator + Tank + Rain System + Repeat Cycle Timer)
- UPC: 806810031872
- ASIN: B07BTHY9M4
- Brand: Grow Crew
- Manufacturer: Grow Crew