Finnex Temperature Controller Digital Heater
Finnex Temperature Controller Digital Heater
The HC-0810M Finnex controller offers a precision digital control with LED digital display which maintains water temperatures at a constant level protecting your livestock from temperature fluctuations. Easily adjustable high/low temperature settings with an audio alert separates this aquarium heater controller from the rest of the competition. Also setting these controllers from Finnex competitors, have ease of mind as this controller features a dual relay inter-work, doubling the protection, disabling heating in case of over heating. This advanced controller carries three prong power receptables that work well with all Finnex Titanium Tubes as well as other brand's heating elements as well. For the utmost advanced aquarium, the digital Finnex heater controller fits right in. Memory equipped to resume preset settings. Please direct to information below for further specifications.
- ASIN: B002TMTA7G
- Brand: Finnex
- Manufacturer: JSK Merchandise Inc.
Hygger Titanium Aquarium Heater for Salt Water and Fresh Water, Digital Submersible Heater with External IC Thermostat Controller and Thermometer, for Fish Tank 20-45 Gal (200W)
Hygger Titanium Aquarium Heater for Salt Water and Fresh Water, Digital Submersible Heater with External IC Thermostat Controller and Thermometer, for Fish Tank 20-45 Gal (200W)
hygger titanium aquarium heater kits, with 1 digital thermostat controller + 2 suction cups + 1 thermometer. Specially designed for saltwater aquariums, with temp setting remember function.How to set the digital heater temp controller?1. When plug in, firstly press the button "Up" to choose the temp unit pattern,℃ or ℉.2. Set the temp: press the button "Set" for 2-3 seconds until the set temp led flickering, then press thebutton "Down" or button "Up" to set the value to your desired temp, finally, press the "Set" button again to lock the value.3. You can set the temp from 32℉to 104℉.When does the heater stop and restart heating?It will stop heating when the water temp reaches to the set temp, restart heating when the water temp is 1℉ less than the set temp.There is a indicator light on the controller, when the heater is working the light is red, when it stops heating the light is off.Directions for use1. For better experience and safety, please carefully read and follow the user manual.2. Please keep the heater fully submerged in water.3. Place the thermometer away from the heater and keep water in circulation.4. Place the heater horizontally near the water intake or on the way of water flow. 5. Please wait the heater tube to cool down before moving it or changing the water. 6. Don't bury the heater in sand or mud.7. Please don't plug in before the heater is well installed. 8. Don't suggest for acrylic or plastic tank.9. Please don't use the heater alone without the digital temp controller.10. Once the controller occurs fault, please stop using it and contact the seller.Submersible heater size chartVoltage: AC110-120V Wattage & fish tank size: 50W (5-10 gallon), 100W (10-25gallon), 200W (20-45 gallon) When the weather gets cold and room temp is lower than 50℉, please choose a larger wattage heater than normal recommended.
- UPC: 688209998290
- ASIN: B07H2ZCXS1
- Brand: Hygger
- Size: 200W (20-45 gallon)
- Manufacturer: hygger
Hygger Titanium Tube Submersible Pinpoint Aquarium Heater with Digital Thermostat,IC Temp Controller 200W
Hygger Titanium Tube Submersible Pinpoint Aquarium Heater with Digital Thermostat,IC Temp Controller 200W
Hygger Pinpoint IC Temp Controller Aquarium Heater will be your best choice! Specification: Voltage: 110V-120V, 60HZ Power cord length: 5.5 ft Available In: Length - 8.7"", for 5~10 Gallons, 50 Watts Length - 9.8"", for 10~25 Gallons, 100 Watts Length - 10.7"", for 20~45 Gallons, 200 WattsPlease read instruction and caution carefully before use, and keep it away from children. Do's & Don'ts ✖️ This titanium heater is not suitable for use in acrylic fish tank. ✖️ DO NOT use heater alone, to avoid overheating, it must be worked with thermostat and temperature detector. Keep heater and thermal detector fully submerged ✖️ We don't suggest to use this temperature controller for other brand heater for security reasons.✖️ We do not recommend to use heater at sump tank, as it's water deepth is not high enough to fully submerged.✖️ Do not burry heater under the dirt or sand, due to different specific heat capacity, it will damage heater. ✔️ Make sure heater placed horizontally and fully submerged as well as the thermal detector when it's on duty. ✔️ We recommend to install a water pump or wave pump to circulate water movement so that the whole aquarium area at the same temperature. ✔️ As thermostat is not waterproof, please keep it away from aquarium. Stay dry. ✔️ If you want to clean the fish tank or take out the heater, please disconnect power and wait for 30 MINUTES to cool down. ✔️ This heater is only suitable for indoor use. Package included: 1* Submersible Aquarium Heater 1* Thermostat with Detector 2* Suction Cups 1* User Manual***Internaitonal customer beware of the local voltage. Any voltage over 120V will burn out the controller and heater without transformer.
- UPC: 688209998979
- ASIN: B07HGXHX5Y
- Brand: Hygger
- Size: 200w
- Manufacturer: hygger
Finnex Digital Heater Controller with Deluxe 800-watt Titanium Tube
Finnex Digital Heater Controller with Deluxe 800-watt Titanium Tube
Built in memory to restore set temperature upon power outage! This package includes a digital controller & an Ultra Sleek Finnex 800 Watt Titanium Tube. The digital controller maintains water temperature within +/-2?F of the set value providing a safe, healthy and stable temperature for the tank. Automatic shut off overheat protection - when the water temperature over the high temperature alert setting value, the alarm will start beeping. The heating process will also be shut off automatically. Advanced digital heating control technology with adjustable low/high temperature alert setting. Three prongs power receptacle works with Finnex 300W, 500W & 800W heating tubes and other brand's heating elements. Please Note: Additional heating units may be required and discouraged from using in extraordinary setups (where warranty may be void) not limited to: Applications outside of standard aquarium use, basement setups, garage setups, ponds, outdoor use, greenhouses, extreme temperature conditions, etc.
- ASIN: B0036UMIZQ
- Brand: Finnex
- Manufacturer: Finnex
MQ Titanium Alloy 200W Aquarium Heater for Salt and Fresh Water, Digital LED Display Submersible Heater with External Thermostat Controller, for Fish Tank 25-40Gallon
MQ Titanium Alloy 200W Aquarium Heater for Salt and Fresh Water, Digital LED Display Submersible Heater with External Thermostat Controller, for Fish Tank 25-40Gallon
Feature: 1) FULL Submersible heater, made of shock resistant and shatter proof Titanium Alloy tube for fresh or salt water. 2) Voltage AC 110-120V. Temperature can be adjusted between 20-34℃, 68-93F. You can press the 'SET' key to shift degree unit between Celsius and Fahrenheit 3) On/Off indicator light for at-a-glance monitoring. Safety control protects against running dry 4) The heater will automatically turn off when water level dips too low 5) Aquarium heater with LED digital display, IP68. Control Accuracy: ±3°F 6) The length of cable is 1.5 m/ 5 ft. Includes suction cups Note: For better experience and safety, please carefully read and follow the user manual. Don't bury the heater in sand or mud. Please don't plug in before the heater is well installed. If you want to clean the fish tank or take out the heater, please disconnect power and wait for 30 MINUTES to cool down. Package included: 1* Submersible Aquarium Heater 2* Suction Cups 1* User ManualIf Error code E1 is always showed on the display, the temperature probe on the top of heater may be blocked by small bubbles or excess water. There are two kinds of solutions for your reference. 1. Take out of the heater, shake the top of the rod to remove bubble or excess water in the probe. 2. Reset the heater： (1) Press and hold the set button (2) The LED display will start to flash after the heater is power on (3) Release the set button, and press the button again to set temperature. (4) Take the top of the heater out of water (5) After the LED screen stops flashing, press the set button again to keep the desired temperature. Any questions, please feel free to contact us. Our customer care team are always here to help you.
- ASIN: B07PB6WY6G
- Brand: MQ
- Size: 200W for 25-40 Gallon Tank
- Manufacturer: MQ
JBJ True Temp Replacement Digital Heater Controller (TT-1000)
JBJ True Temp Replacement Digital Heater Controller (TT-1000)
The JBJ True Temp Digital Heater Controller (TT-1000) is a replacement part for all of the JBJ True Temp Titanium Heating Systems. The temperature sensor is included.
- UPC: 940005370022
- ASIN: B00GJ1S3GM
- Brand: JBJ Manufacturing
- Manufacturer: JBJ Manufacturing
Finnex 500W Digital Touch Control Aquarium Titanium Heater Guard
Finnex 500W Digital Touch Control Aquarium Titanium Heater Guard
The HMX series carries updates over previous Finnex Titanium Heater lines. The HMX series sports a sleek and modernized black control face that easily controlled via its precision touch pad. Corrosion-resistant, fast heating titanium tube is engulfed with well fitted heater guard to ensure the safety of one's aquatic inhabitants and surrounding equipment. Maintains Water Temperature within +/-2º F of the setting value. Memory Chip to restore previous settings. Fused technology to create a precision digital control that maintains water temperatures at a constant level. In case of a power failure, heaters are equipped with memory to bring you tank back to it's original settings without any unfortunate mishaps upon power return.
- UPC: 856521005464
- ASIN: B018AHND2Q
- Brand: Finnex
- Manufacturer: JSK Merchandise Inc.
AquaTop 500W Digital Heater with External Control
AquaTop 500W Digital Heater with External Control
Introducing Aqua top's EX Series of fully submersible digital heaters with external thermostat control. The EX Series offers a compact design for versatile placement and is extra durable due to the built-in glass element. The remote external thermostat control makes it simple and easy to adjust the temperature setting without getting your hands wet. Aqua top's EX Series is suitable for both freshwater and saltwater use.
- UPC: 819603017144
- ASIN: B01C4PEQ30
- Brand: AquaTop
- Size: 500 Watts
- Manufacturer: Aquatop, Inc.
U-picks Aquarium Heater 50W Fish Tank Heater Auto Thermostat Mini Small Submerisable Heater with LED Digital Temperature Readout and External Temperature Controller
U-picks Aquarium Heater 50W Fish Tank Heater Auto Thermostat Mini Small Submerisable Heater with LED Digital Temperature Readout and External Temperature Controller
When winter comes, many fishes and turtles need a warm environment to spend the winter safely. In order to give your cute fish a warm and safe living environment, we design this high security heater. If you are looking for a high quality heater for your cute fishes and turtles, then order now and bring our heater back home, it will be a best gift for your aquarium. Specification: Temperature Range: 68 to 94°F(20-34℃) Main Material: Durable quartz glass and Plastic Size:12x6.5x3cm Voltage: 110V-120V Tank Size Suggestion: 50W: for 3-10 gal 200W: for up to 50 gal Package included: 1pc Mini Fish Tank Heater +2pcs Aquarium plants+1pc user instruction Warm Tips: 1, the fish tank heating rod must be completely submerged under water to avoid dry burning 2, after the aquarium heater is unplugged, please not take it out from the water immediately, to avoid the high temperature of the residual heater hurting your hands or causing damage to the heater. (Do not forget when changing water) 3, when your hand is going to reach into the water, all equipment such as filters (heaters, aquarium lights) must be cut off to ensure safety. 4, do not plug in the power supply with wet hands.
- UPC: 745844198826
- ASIN: B07KW1QP91
- Brand: U-picks
- Manufacturer: Basieny
Titanium Alloy50-200W Aquarium Heater for Salt and Fresh Water, Digital LED Display Submersible Heater w External Thermostat Controller, for Fish Tank 50-60 Gallon CE (100W for 15-25 Gallon Tank)
Titanium Alloy50-200W Aquarium Heater for Salt and Fresh Water, Digital LED Display Submersible Heater w External Thermostat Controller, for Fish Tank 50-60 Gallon CE (100W for 15-25 Gallon Tank)
Feature: 1) FULL Submersible heater, made of shock resistant and shatter proof Titanium Alloy tube for fresh or salt water. 2) Voltage AC 110-120V. Temperature can be adjusted between 20-34℃, 68-93F. You can press the 'SET' key to shift degree unit between Celsius and Fahrenheit 3) On/Off indicator light for at-a-glance monitoring. Safety control protects against running dry 4) The heater will automatically turn off when water level dips too low 5) Aquarium heater with LED digital display, IP68. Control Accuracy: ±3°F 6) The length of cable is 1.5 m/5.9 in. Includes suction cups Note: For better experience and safety, please carefully read and follow the user manual. Don't bury the heater in sand or mud. Please don't plug in before the heater is well installed. If you want to clean the fish tank or take out the heater, please disconnect power and wait for 30 MINUTES to cool down. Package included: 1* Submersible Aquarium Heater 2* Suction Cups 1* User Manual
- UPC: 778739562723
- ASIN: B07QTPGR4F
- Brand: MQUPIN
- Size: 100W for 15-25 Gallon Tank
- Manufacturer: MQUPIN