Fantech DBF 110 Dryer Booster Fan 4" Duct 167 CFM

Fantech DBF 110 Dryer Booster Fan 4" Duct 167 CFM

This is a genuine replacement part. The model number and name for the following item is: Fantech DBF110 Fan

  • UPC: 696335226200
  • ASIN: B000GXF7KO
  • Brand: Systemair/Fantech
  • Manufacturer: Systemair/Fantech

Systemair Dryer Booster Kit with Fan DBF 4XL Fantech

Systemair Dryer Booster Kit with Fan DBF 4XL Fantech

The DBF 4XL features our FX4XL fan with a housing made from galvanized steel, suitable for most commercial applications | The fans can handle lengths of duct up to 60 feet and six elbows | The backward inclined blades allow lint to pass through the fan | The patented control automatically operates the booster fan whenever the dryer is running | When the dryer turns on, the fan is activated by the automatic pressure sensitive switch so warm, moist air is exhausted out of the house quickly | Suitable for dryer runs with up to a maximum 60 linear feet of 4" rigid duct with six elbows - Manufacturer: System air

  • UPC: 723434391642
  • ASIN: B001NFNB1Q
  • Brand: Fantech
  • Size: 11 x 13 x 13
  • Manufacturer: Systemair

Tjernlund LB2 Dryer Duct Booster with Status Panel UL-705 Listed DEDPV

Tjernlund LB2 Dryer Duct Booster with Status Panel UL-705 Listed DEDPV

The Fantech dryer exhaust fans have been specially designed to solve the problems caused by long duct runs on clothes dryers. According to dryer manufacturers and some local building codes, exhaust fans should be added in the dryer duct run when the length of the duct exceeds 35 feet with no bends, 30 feet with one bend or 25 feet with two bends.

  • UPC: 080956959959
  • ASIN: B00TUIF8LE
  • Brand: Tjernlund
  • Manufacturer: Tjernlund

Acme Miami 9460 Dryer Booster- Booster for clothes dryers

Acme Miami 9460 Dryer Booster- Booster for clothes dryers

When the dryer exhaust has a long run to the vent it increases drying time as well as wear and tear on the dryer. The DryerJet has been tested on runs up to 50 feet of duct and up to four 90° bends. Testing was done by an independent lab at Florida International University. Click on picture for dimensional diagram. No wiring necessary, just plug it in! Fully Automatic Operation. Features the PS-35 Pressure Switch mounted on unit completely wired to the 10-foot line cord. Auto operation with adjustable pressure switch wired to a 10, 115 volt power cord. Ball bearing motor OUT of airstream. No lint on motor. Install next to dryer or anywhere in the line - Tested to CSA standard C22.2 113-M 1984.

  • UPC: 612070094607
  • ASIN: B0037MBG5Q
  • Brand: Acme
  • Manufacturer: Acme

BetterVent Indoor Dryer Vent

BetterVent Indoor Dryer Vent

This indoor dryer vent is designed to capture the lint from your electric clothes dryer, for those unable to vent to the outside. All types of indoor dryer vents will allow heat and humidity into the room. We recommend the user allow for air circulation and ventilation when operated in confined spaces. This patented double filter system does not use water, eliminating messy cleanups. The stainless steel screen acts as a pre-filter capturing large lint particles, pet hair, etc. and can be cleaned with a sweeping motion of the hand. The polyester filter will capture the finer lint dust and can be vacuumed clean for extended use or replaced when fully loaded with lint. Replacement filters are available in packages of 6, lasting most users up to a year under normal conditions. There is a patent pending "safety vent flap" designed to open, as a reminder to clean the screen and filter. For renters or homeowners concerned with dryer lines that exceed the dryer manufacturer's recommendations, resulting in inefficient operation and lint accumulation, this is a great solution. Saves energy in colder months by returning warm dryer air into the room. All installation hardware included. Customer supplies hose and clamps. Installation is quick and easy, instructions included. Warranted 30 days against defects. Returns accepted within 30 days of purchase. Made in USA.

  • UPC: 826659516590
  • ASIN: B00Q4X2FSM
  • Brand: BetterVent
  • Manufacturer: ADR-Products

Tjernlund M-49504351 in-Line Fan with Current Sensor Switch Dryer Duct Booster M-4, Metal, 4"

Tjernlund M-49504351 in-Line Fan with Current Sensor Switch Dryer Duct Booster M-4, Metal, 4"

Versatile and durable this 4" metal in-line exhaust fan features high pressure air handling performance with low noise and extremely low power usage. This fan and control combination can be used to activate this fan as another appliance, fan, or other device receives power. Often used for Duct Booster, Dryer Boosting, Equipment Cooling, Factory Exhaust and many other applications. The Sun court Current Switch is designed to turn 120 VAC devices on when it senses and input current. The Current Switch is UL 94-V0 rated for safety of flammability of plastic materials for parts in devices and appliances. The output switch rating is 120 VAC with a running frequency of 45Hz to 65Hz and its max ambient temperature is 140°F.

  • UPC: 080956952226
  • ASIN: B00AL0DJNY
  • Brand: Tjernlund
  • Manufacturer: Tjernlund

Tjernlund DBF2 Dryer Duct Booster Fan, No Clogs, 4"Duct

Tjernlund DBF2 Dryer Duct Booster Fan, No Clogs, 4"Duct

Decrease drying times and eliminate dangerous lint build up in your dryer system. This Dryer Booster Fan helps boost the performance of clothes dryers by allowing the dryer to more effectively exhaust the moist air created during the drying process. Long or zig-zagging duct runs can hamper the dryer's ability to get rid of the moist air in the drum. This means you are drying your clothes with damp air and if lint that gets past the lint trap isn't properly exhausted completely out of the system it can build up and become a major fire hazard. Includes instructions, hardware packet and mounting bracket.

  • UPC: 080956960290
  • ASIN: B013TD54SW
  • Brand: Tjernlund
  • Manufacturer: Tjernlund

Suncourt DEDPV Patented Centrasense Technology Dryer Booster Fan Kit UL-705 Listed (DRM04)

Suncourt DEDPV Patented Centrasense Technology Dryer Booster Fan Kit UL-705 Listed (DRM04)

Only DEDPV fan kit in the market: To run the full cycle of the dryer rather than resorting to periodic on/off cycling. That can be installed in any orientation with no calibration needed. That allows for flush mounted remote indicator. The DRM04 Dryer Booster Fan Kit is a Dryer Exhaust Duct Power Ventilator (DEDPV) designed for compliance to UL Standard 705. Any UL705 DEDPV is only suitable for residential electric clothes dryers employing 4" ductwork. Suncourt accepts no responsibility for use of this product in other applications. DRM04 Kit Contains: (x1) TFM04 4" corded metal centrifugal fan with monitor (x1) TFR100 remote operation indicator (x1) English and French TFR100 warning card (x35') of 22 gauge 5-conductor wire (x1) CS100 clip-on clothes dryer current sensor with 6' cord (x2) 4" metal cleanout sleeves with band clamps (x4) self-adhesive foam strips (to limit vibration transferred to ductwork) Screwpack Contents: (x4) 1/4" x 1 1/2" lag bolts (mounting the fan) (x4) 1/4" washers (mounting the fan) (x4) 3/8" rubber grommets (lag bolt vibration isolation) (x2) 6-32 x 1 1/2" machine screws (for mounting remote indicator to electrical box) (x2) #6 x 1 1/2" sheetmetal screws (for mounting remote indicator flush to drywall) (x2) #6 7/8" long wall anchors (for mounting remote indicator flush to drywall) (x3) self-adhesive cord clips (for securing low-voltage signal wiring) Tools / supplies you will need: 3/16" drill bit (wall anchors if remote is flush-mount, pilot holes for lag bolts). 7/16" socket and ratchet (to tighten lag bolts). Phillips screwdriver (for mounting remote indicator). Flathead screwdriver or 5/16" nut driver (for cleanout band clamps). Sheetmetal shears. Foil duct tape. Wire cutters (to cut slot in operation indicator if flush-mounted). Wire strippers (to cut low-voltage wire to length and strip if need

  • UPC: 066028034076
  • ASIN: B07MJLBZFK
  • Brand: Suncourt
  • Manufacturer: Suncourt

iPower GLDUCT4X8C 4 inch 8 feet Non-Insulated Aluminum Foil Vent with 2 Clamps, Ducting

iPower GLDUCT4X8C 4 inch 8 feet Non-Insulated Aluminum Foil Vent with 2 Clamps, Ducting

4" 8' Non-insulated ducting aluminum foil vent with 2 clamps

  • UPC: 610395731405
  • ASIN: B00EPE3XHY
  • Brand: iPower
  • Size: Ducting
  • Manufacturer: iPower Grow Light

HG POWER 3 Inch Inline Duct Fan Booster Fan Plastic Waterproof Ventilation Pipe Exhaust Ceiling Bathroom Fan

HG POWER 3 Inch Inline Duct Fan Booster Fan Plastic Waterproof Ventilation Pipe Exhaust Ceiling Bathroom Fan

Are you still annoying by the fumes in the kitchen, the indoor air formaldehyde, the smell in the bathroom? Don't worry, HG POWER Inline Duct Fan HF-S Series would be a good choice to address your problem. Features: - Prewired for quick installation - Cost-effitive and energy efficient - Approved for use with two speed control - Suitable for domestic and commercial applications - Moisture resistant, great for use in damp environment - Backward curved impeller to ensure quiet operation possible - High performance and static pressure to overcome the resistance caused by long ducting - Shaded pole motor with permanently lubricated ball bearings for vibration-free operation and continuous running Specifications: LS-Low Speed, HS-High Speed Model: HF-75S Voltage: 100-120V Frequency: 60Hz Current: 0.42A - 0.50A Power: 25W - 29W Speed: 2550RPM - 2750RPM Air Flow: 43m³/h - 46m³/h Air pressure: 114Pa - 129Pa Noise Level: 21dB - 26dB Package contents: 1 X Duct fan with cable 4 X Screws 1 X Instruction

  • UPC: 767550223746
  • ASIN: B077F76Q24
  • Brand: HG POWER
  • Size: 3 inches
  • Manufacturer: HG POWER