Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear
Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear
Gorilla takes epoxy to a new level—the Gorilla Tough level. With its superior solvent and water resistance, Gorilla Epoxy adhesive is incredibly strong and durable for household and automotive repairs alike. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is easy to dispense and won’t harden over time. The two-part, gap-filling formula easily bonds steel, aluminum, glass, wood, ceramic, tile and most plastics. Plus, it dries in an ideal, crystal-clear finish that makes projects look spotless. Directions: 1. Prepare Your Work Area and the Surface: It is recommended to use Gorilla Epoxy in a well-ventilated area. Prepare the surface: To improve adhesion, roughen smooth surfaces before gluing. Then clean and dry all surfaces to be bonded. 2. Mixing Gorilla Epoxy: Remove the black cap. With tip pointing upward, cut or snap the end from tip of the syringes. With the tip still pointing upward, eliminate air and ensure even dispensing by slowly pushing the plunger until both the resin and the hardener are at the tip. Push the plunger to dispense even amounts of resin and hardener onto a clean, disposable, contained surface. Mix the two parts for about 20 seconds, until the mixture is uniform. 3. Application: After mixing is complete, apply Gorilla Epoxy within 5 minutes. The epoxy mixture will continue to thicken and the bond strength will decrease the longer you wait to apply. 4. Clamping: To reach maximum bond strength, clamp project together and leave undisturbed. Important Cure Times: Set: 5 minutes to apply and position Handling: Allow to cure for 30 minutes undisturbed (no weight or handling) Final Cure: Allow 24 hours for load-bearing weight Storage: To close, pull plunger slightly back. Wipe tip clean with dry cloth and align notch on tip and cap. Close tightly. Click on the Gorilla link at the top of this page to see more fine products from the Gorilla Glue Company.
- UPC: 052427420015
- ASIN: B001Z3C3AG
- Brand: Gorilla
- Size: 1 - Pack
- Manufacturer: Gorilla
J-B Weld 8251 2 Ounce Quick Setting Epoxy Adhesive - 1.52 oz
J-B Weld 8251 2 Ounce Quick Setting Epoxy Adhesive - 1.52 oz
J-B WoodWeld is a fast setting two-part epoxy system formulated for wood bonding and repairs. When fully cured it can be shaped, tapped, filed, sanded and drilled. It provides a lasting permanent bond that is stronger than the wood! J-B WoodWeld has a 1:1 mixing ratio, sets in 6 minutes and cures in 1-3 hours. Rated at a tensile strength of 1800 PSI, J-B WoodWeld cures to a light tan color.
- UPC: 971500289113
- ASIN: B004NB3OMS
- Brand: J-B Weld
- Size: 2 Ounce
- Manufacturer: JBWeld
TotalBoat Penetrating Epoxy (Half-Gallon, Traditional)
TotalBoat Penetrating Epoxy (Half-Gallon, Traditional)
TotalBoat clear penetrating epoxy seals deeper and cures stronger than leading wood rot repair epoxy solutions. This low-viscosity, no VOC system is ideal for restoring damaged or rotten wood, and sealing new wood from the elements. It works by stopping active rot, gluing and strengthening wood fibers, and sealing porous wood from the inside out. By curing a little slower, TotalBoat Penetrating Epoxy is able to saturate more wood more deeply than 5:1 epoxy resins. Once cured, it is 100% waterproof. Apply with brush, roller, or syringe. Want to saturate the wood even deeper? Add acetone to increase the penetrating and restoration power. Once cured, it may be painted or varnish over after light sanding.Dealing with rotted wood on your boat, home, or other structure? Why replace entire sections of wood when you can restore and strengthen the original wood using this powerful penetrating epoxy sealer. It comes in multiple sizes to aid in wood treatment projects large or small. Larger quantities are perfect for restoring and sealing large or multiple wood surfaces. For smaller wood rot restoration projects, these two-part epoxy kits are available in pints as well.TotalBoat Penetrating Epoxy is available in Traditional and Cold Weather formulas, with very similar characteristics and performance. The Cold Weather formula is ideal for 40 F to 65 F temperatures, Choose the Traditional formula when working in temps from 65 to 90 degrees F. Do NOT use on top of Minwax oil-based stains. Do NOT use Cold Weather Penetrating Epoxy as a fast-cure solution in warm temperatures. Compare to Git Rot epoxy, System 3, Smith Clear Penetrating Epoxy, and other wood rot repair treatments. All TotalBoat marine products are developed by boaters for boaters, to provide great value and great results.
- UPC: 811932020734
- ASIN: B00J36WRSK
- Brand: TotalBoat
- Size: Half-Gallon
- Manufacturer: Jamestown Distributors
Crystal Clear Bar Table Top Epoxy Resin Coating for Wood Tabletop - 1 Gallon Kit
Crystal Clear Bar Table Top Epoxy Resin Coating for Wood Tabletop - 1 Gallon Kit
Crystal Clear Bar Table Top Epoxy Resin Coating For Wood Tabletop - 1 Gallon KitUV Stable Crystal Clear Table Top System is a high performance two part epoxy resin Ultra Clear epoxy system designed for Table Tops, Bars, Wood finishes, See-Through Encapsulations, clear epoxy resin for crafts, Art work, and other applications requiring a clear, strong, plastic coating specifically designed to resist Yellowing caused by the sun and other Ultra Violet light sources. This two part epoxy resin material has an easy to use 1 to 1 by volume mix ratio, wets out substrates well, maintains its integrity over sharp corners, it has excellent air release qualities and a relatively fast set time for an epoxy coating which may be accelerated by mild heat to 160F. Makes a great two part epoxy wood glue. While this material will do much better than competitors products for non-yellowing we still do not recommend it for permanent outdoor applications.This kit includes 1/2 gallon of A Side and 1/2 Gallon B Side Totaling 1 Gallon. Advantages 100% Solids Self Leveling, High Gloss U.V. Resistant Formula Excellent Air Release Excellent Color Stability Improved Impact Strength Improved Surface Appearance Early Development of Physical and Performance Properties Produces a Tough, High Gloss, Water Resistant Coating Eliminates Craters, Crawling and Fish Eyes Blush Resistant * We are in the process of changing our labels, please note some inventory will have our older labels, and some will have our new ones.
- UPC: 851197007002
- ASIN: B01LYK2NAG
- Brand: Pro Marine Supplies
- Size: 1 Gallon
- Manufacturer: Pro Marine Supplies Inc.
PC Products PC-Woody Wood Repair Epoxy Paste, Two-Part 48oz in Two Cans, tan 643334
PC Products PC-Woody Wood Repair Epoxy Paste, Two-Part 48oz in Two Cans, tan 643334
PC-Woody is an epoxy paste formulated to replace missing and rotted wood. It has structural strength greater than most wood. PC- Woody is a permanent wood repair for interior and exterior applications. This epoxy is made from real wood and has many characteristics of wood. PC-Woody formulation provides extended working time, for large and critical jobs, which allows the user time to reposition work or make changes. High "wet grab" or tack of PC-Woody makes overhead and sidewall work easy without drip or sag. PC- Woody demonstrates excellent resistance to all weather elements, mildew dry rot, UV light, fresh and salt water, and also chemicals present in pressure-treated wood. After cure paint, stain, drill, machine, sand, file, tap, or saw. Repair log homes, furniture, window and door sills and much more. Color (component a): Off white. Color (component b): Light brown. Color (mixed): Pine or tan. Work time (70 degree F): 30-40 Minutes. Tack free cure time: 90 Minutes. Cure for service: 24 Hours. Maximum cure: 7 Day. Gardner impact resistance: 100 In/lb. Elongation: 5-7 percent. Conduction (electric): Non conductive. Thermal shock: Excellent. Toxicity: Non toxic once cured. Heat range: -20 To 200 degree F. Tensile shear strength: 850 psi. Compressive yield: 2340 psi. Flexural strength: 1280 psi. Water absorption: 0. 44 percent. Weight (specific gravity): 0. 72 g/cm cube, 0. 42 oz./in cube. Hardness shored: 50-55 (1wk). Heat deflection: 120 degree F.
- UPC: 549836433342
- ASIN: B008DZ1GHU
- Brand: PC Products
- Size: 48 oz
- Manufacturer: Protective Coating Co.
Crystal Clear Epoxy Resin One Gallon Kit | MAS Table Top Pro Epoxy Resin & Hardener | Two Part Kit for Wood Tabletop, Bar Top, Resin Art | Set Includes Spreader & Brush | Professional Grade Coating
Crystal Clear Epoxy Resin One Gallon Kit | MAS Table Top Pro Epoxy Resin & Hardener | Two Part Kit for Wood Tabletop, Bar Top, Resin Art | Set Includes Spreader & Brush | Professional Grade Coating
Thank you for your interest in TableTop Pro by MAS Epoxies!Do you want the appearance of 50 coats of varnish with just one pour? If so, look no further than our Table Top Epoxy. Our 1:1 epoxy system provides you with a protective glass-like finish on any surface. Our epoxy goes on in thick pours that self-level. Everything about our epoxy makes it easy to get an alluring clear finish quickly and easily. At MAS we have over 25 years of experiencing producing the highest-quality epoxy resin products in the marketplace. We hope you'll trust us for your next project. FAQ Q: How much does 1 gallon cover? A: As a rule of thumb, 1 gallon kit covers 12 sq ft with an 1/8" coating. This just an approximation. The exact amounts vary from project to project based on a number of factors (surface material, application type, etc). Q: How do I apply? Does it de-gas by itself or do I have to torch out the bubbles? A: See the MAS Table Top Pro Epoxy Application tutorial video on YouTube if interested. Similar to other epoxy resins, TT Pro does not de-gas by itself. Once the epoxy resin is poured onto a surface, air bubbles will start to rise up and you will need to apply heat to disperse them about 15 minutes after pouring. We recommend using a heat gun or propane blow torch. Q: Can I use this product on outdoor furniture? What can you tell me about UV resistance? A: Yes, MAS Table Top Pro can be used for exterior projects and furniture, but, generally speaking, epoxy resin (all brands despite any marketing claims) tends to yellow & may chalk when exposed to direct sunlight for extended periods of time, which is why we recommend protecting epoxies with a UV protectant varnish or paint for outdoor use. Marine grade polyurethane varnishes like Bristol Finish UV Clear, with enhanced UV protection additives, offer improved UV stability & abrasion resistance over "off the shelf" spar varnishes available at your local hardware store.
- UPC: 810395007009
- ASIN: B07CZR9BLW
- Brand: MAS Epoxies
- Size: 1 Gallon
- Manufacturer: Endurance Technologies, INC
J-B Weld 8257 KwikWood Wood Repair Epoxy Putty Stick - 1 oz.
J-B Weld 8257 KwikWood Wood Repair Epoxy Putty Stick - 1 oz.
KwikWood is a hand-mixable epoxy putty, formulated to repair and rebuild wood. After mixing, it cures to the same density as wood and becomes an integral part of the repair. For use on exterior or interior applications, it contains no solvents, will not rot, shrink, crack or pull away. KwikWood has a 15-25 minute work life. After 60 minutes, it can be machined, drilled, tapped, sanded, filed and painted. Stronger than wood, KwikWood dries to a light tan color.
- UPC: 798804236250
- ASIN: B002NJDAJY
- Brand: J-B Weld
- Size: 1 Ounce
- Manufacturer: JBWeld
Loctite Epoxy Five Minute Instant Mix 0.47-Fluid Ounce Syringe (1365868)
Loctite Epoxy Five Minute Instant Mix 0.47-Fluid Ounce Syringe (1365868)
0. 47 oz. This high-strength 2 part epoxy is packaged in an advanced delivery system. It has an easy-to-use self-mixing nozzle applicator to dispense the correct amount of exactly mixed adhesive with precision placement. No mixing is required creating a fast and easy use epoxy for many different projects and repairs. It bonds wood, metal, ceramics, glass, some plastics, and tile. This formula is resistant to solvents, impact, and moisture. And as an added bonus, there are 2 self-mixing nozzles included in the package for more than one job. The 5 minute set time allows proper positioning of your materials to ensure the best fit. This high-strength 2 part epoxy is packaged in an advanced delivery system. This product is manufactured in China. This product meets customer requirement.
- UPC: 021111639217
- ASIN: B0044F9KFI
- Brand: Loctite
- Size: Single
- Manufacturer: Loctite
Titebond III Ultimate Wood Glue, 16-Ounces #1414
Titebond III Ultimate Wood Glue, 16-Ounces #1414
Titebond III Ultimate Wood Glue, 16-Ounces #1414
- UPC: 037083714241
- ASIN: B0002YQ3KA
- Brand: Titebond
- Size: 16 Ounce
- Manufacturer: Titebond
Devcon 35345 2 Ton Clear Epoxy - 0.5 oz. 2-Part Tube
Devcon 35345 2 Ton Clear Epoxy - 0.5 oz. 2-Part Tube
Devcon 2 Ton Epoxy is a clear, extremely strong, non-shrinking adhesive, specially formulated for high-clarity and good impact strength. Only mix the amount of resin and hardener together that can be used within the handling time. You can mix colored chalk with epoxy to repair enamel and china that has been nicked, and also color pigment concentrate. This must be done after the resin and hardener have been thoroughly mixed together. It is good to use removable tape on any area that you do not want epoxy to get on. Remove the tape before the epoxy cures. This waterproof formula bonds acrylic, china, fiberglass, metal, wood, concrete, ceramic, and glass with a tensile strength of 2500 PSI. Temperature Range: -40 degrees Fahrenheit to 200 degrees Fahrenheit.
- UPC: 078143353451
- ASIN: B000BO5CGW
- Brand: Devcon
- Size: 0.5 Ounce
- Manufacturer: Devcon