Elmer's E7310 Carpenter's Wood Glue Max, Interior/Exterior, 16 Ounces

Elmer's E7310 Carpenter's Wood Glue Max, Interior/Exterior, 16 Ounces

Only waterproof and stainable wood glue available. Painted formula delivers superior bond strength and stainability. Resists heat, mold, and mildew. Great for indoor and outdoor projects. Sandable and paintable. Easy water clean up and nontoxic. No. E7290: Size: 4 oz., Pkg Qty: 1, Package Type: Bottle No. E7300: Size: 8 oz., Pkg Qty: 1, Package Type: Bottle No. E7310: Size: 16 oz., Pkg Qty: 1, Package Type: Bottle No. E7330: Size: 1 gal, Pkg Qty: 1, Package Type: Bottle For more than 65 years, Elmer's Products, Inc. has been providing creative adhesive solutions that support success and turn ideas into reality.

  • UPC: 795871023509
  • ASIN: B0045PXPH6
  • Brand: Elmer's
  • Size: 16 Ounce
  • Manufacturer: Elmer's Products

Gorilla Wood Glue, 8 ounce Bottle

Gorilla Wood Glue, 8 ounce Bottle

Gorilla Wood Glue is the adhesive that woodworkers, carpenters and hobbyists trust for their woodworking projects. Gorilla Wood Glue, a PVA glue, offers the benefits of an easy-to use, water-based adhesive, with the holding power Gorilla is known for. This PVA glue is incredibly water resistant and dries a natural color that offers an invisible bond line for your projects. Directions: For best results, it is essential that the wood surfaces are prepared prior to application of glue. For laminating, the surfaces should be planed smooth, leaving the board surface free from machine marks, tear-out and snipes. Also, be careful to avoid burnishing and end snipes. In general, apply a generous amount of glue on one of the surfaces. On hard-to-glue woods, apply the glue on both surfaces. Rub together with the other surface to distribute the glue evenly on both surfaces. Enough glue should be applied so that a fine bead of glue squeeze-out will occur when clamping. Coverage: One gallon of Gorilla Wood Glue will cover about 200 square feet. One fluid ounce will cover approximately 1.6 square feet. Clamping: The technique and type of clamp to be used is determined by many factors. In general, apply enough pressure that will cause a fine bead of glue to squeeze out when the proper pressure is applied. Clamping Time (amount of time pressure needs to remain applied): 20–30 minutes for room temperature applications. The temperature must be above 55°F. Note that clamping time can be dependent on temperature, humidity, and the porosity of the wood. Cure Time (amount of time for glue to reach total bonding strength): 24 hours. Clean up while glue is wet: Use a clean, damp cloth to wipe off excess glue. When areas have completely dried, sand as needed. Click on the Gorilla link at the top of this page to see other quality products from the Gorilla Glue Company.

  • UPC: 735090571498
  • ASIN: B001E4E3KY
  • Brand: Gorilla
  • Size: 1 - Pack
  • Manufacturer: Gorilla

Titebond 1413 III Ultimate Wood Glue, 8-Ounces

Titebond 1413 III Ultimate Wood Glue, 8-Ounces

Titebond 1413 III Ultimate Wood Glue, 8-Ounces

  • UPC: 037083714234
  • ASIN: B0001YS16U
  • Brand: Titebond
  • Size: 8 Ounce
  • Manufacturer: Titebond

Titebond 1415 III Ultimate Wood Glue, 32-Ounce Bottle

Titebond 1415 III Ultimate Wood Glue, 32-Ounce Bottle

  • UPC: 037083014150
  • ASIN: B0002YQ3KU
  • Brand: Titebond
  • Size: 1 Qt.
  • Manufacturer: Titebond

Gorilla Wood Glue, 18 ounce Bottle

Gorilla Wood Glue, 18 ounce Bottle

Gorilla Wood Glue is the adhesive that woodworkers, carpenters and hobbyists trust for their woodworking projects. Gorilla Wood Glue, a PVA glue, offers the benefits of an easy-to use, water-based adhesive, with the holding power Gorilla is known for. This PVA glue is incredibly water resistant and dries a natural color that offers an invisible bond line for your projects. Directions: For best results, it is essential that the wood surfaces are prepared prior to application of glue. For laminating, the surfaces should be planed smooth, leaving the board surface free from machine marks, tear-out and snipes. Also, be careful to avoid burnishing and end snipes. In general, apply a generous amount of glue on one of the surfaces. On hard-to-glue woods, apply the glue on both surfaces. Rub together with the other surface to distribute the glue evenly on both surfaces. Enough glue should be applied so that a fine bead of glue squeeze-out will occur when clamping. Coverage: One gallon of Gorilla Wood Glue will cover about 200 square feet. One fluid ounce will cover approximately 1.6 square feet. Clamping: The technique and type of clamp to be used is determined by many factors. In general, apply enough pressure that will cause a fine bead of glue to squeeze out when the proper pressure is applied. Clamping Time (amount of time pressure needs to remain applied): 20–30 minutes for room temperature applications. The temperature must be above 55°F. Note that clamping time can be dependent on temperature, humidity, and the porosity of the wood. Cure Time (amount of time for glue to reach total bonding strength): 24 hours. Clean up while glue is wet: Use a clean, damp cloth to wipe off excess glue. When areas have completely dried, sand as needed. Click on the Gorilla link at the top of this page to see other quality products from the Gorilla Glue Company.

  • UPC: 052427000125
  • ASIN: B001NN5T22
  • Brand: Gorilla
  • Size: 1 - Pack
  • Manufacturer: Gorilla

Titebond 1416 III Ultimate Wood Glue, 1-Gallon

Titebond 1416 III Ultimate Wood Glue, 1-Gallon

Titebond 1416 III Ultimate Wood Glue, 1-Gallon

  • UPC: 037083014167
  • ASIN: B0002YQ3M8
  • Brand: Titebond
  • Size: 1 gal.
  • Manufacturer: Titebond

Titebond III Ultimate Wood Glue, 16-Ounces #1414

Titebond III Ultimate Wood Glue, 16-Ounces #1414

Titebond III Ultimate Wood Glue, 16-Ounces #1414

  • UPC: 037083714241
  • ASIN: B0002YQ3KA
  • Brand: Titebond
  • Size: 16 Ounce
  • Manufacturer: Titebond

Minwax 42853000 Stainable Wood Filler, 16-Ounce

Minwax 42853000 Stainable Wood Filler, 16-Ounce

Minwax 42853000 Stainable Wood Filler, 16-Ounce

  • UPC: 027426428539
  • ASIN: B000KKMZRG
  • Brand: Minwax
  • Size: 16 oz
  • Manufacturer: Minwax

Titebond II Premium Water Resistant Wood Glue - 16 Fluid Ounce

Titebond II Premium Water Resistant Wood Glue - 16 Fluid Ounce

Works great outdoors. Titebond II Premium Wood Glue is the only leading brand, one-part wood glue that passes the ANSI Type II water-resistance specification. It is ideal for exterior wood-working projects, including outdoor furniture, birdhouses, mailboxes, planters and picnic tables Titebond II Premium provides a strong initial tack, fast speed of set, superior strength and excellent sandability. It is FDA approved for indirect food contact (cutting boards) and is ideal for radio frequency (R-F) gluing systems.

  • UPC: 037083050042
  • ASIN: B001DSZ2RY
  • Brand: Titebond
  • Size: Pack of 1
  • Manufacturer: Titebond

Gorilla Wood Glue, 4 ounce Bottle, (2 Pack)

Gorilla Wood Glue, 4 ounce Bottle, (2 Pack)

Gorilla wood glue is the adhesive that woodworkers, carpenters and hobbyists trust for their woodworking projects. Gorilla wood glue, a PVA glue, offers the benefits of an easy-to use, water-based adhesive, with the holding power Gorilla is known for. This PVA glue is incredibly water resistant and Dries a natural color that offers an invisible bond line for your projects. Directions: for best results, it is essential that the wood surfaces are prepared prior to application of glue. For laminating, the surfaces should be planed smooth, leaving the board surface free from machine marks, tear-out and snipes. Also, be careful to avoid burnishing and end snipes. In general, apply a generous amount of glue on one of the surfaces. On hard-to-glue woods, apply the glue on both surfaces. Rub together with the other surface to distribute the glue evenly on both surfaces. Enough glue should be applied so that a fine bead of glue squeeze-out will occur when clamping. Coverage: one gallon of Gorilla wood glue will cover about 200 square feet. One fluid ounce will cover approximately 1.6 square feet. Clamping: the technique and type of clamp to be used is determined by many factors. In general, apply enough pressure that will cause a fine bead of glue to squeeze out when the proper pressure is applied. Clamping time (amount of time pressure needs to remain applied): 20–30 minutes for room temperature applications. The temperature must be above 55°f. Note that clamping time can be dependent on temperature, humidity, and the porosity of the wood. Cure time (amount of time for glue to reach TOTAL bonding strength): 24 hours. Clean up while glue is wet: use a clean, damp cloth to wipe off excess glue. When areas have completely dried, sand as needed. Click on the Gorilla link at the top of this page to see other quality products from the Gorilla glue company.

  • UPC: 052427006271
  • ASIN: B01M32X6WD
  • Brand: Gorilla
  • Size: 2 - Pack
  • Manufacturer: Gorilla Glue