Fowler FOW74-102-006 Electronic Caliper (AutoCal 6" Fractional)

Fowler FOW74-102-006 Electronic Caliper (AutoCal 6" Fractional)

AUTOCAL ELECTRONIC CALIPER

  • UPC: 646795179028
  • ASIN: B00WL8HUUM
  • Brand: Fowler & Nsk
  • Size: 6 to 7.9 Inches
  • Manufacturer: Fowler

Fowler Full 2 Year Warranty Xtra-Range Electronic Caliper, 54-100-024-1, 0-24" Measuring Range, 4" Jaw Depth, 0.0005" Resolution

Fowler Full 2 Year Warranty Xtra-Range Electronic Caliper, 54-100-024-1, 0-24" Measuring Range, 4" Jaw Depth, 0.0005" Resolution

The Fowler Xtra-Range digital caliper is available in extended measuring ranges of up to 24"/600mm for measuring inside dimensions (ID) and outside dimensions (OD), and has 0.0005"/0.01mm resolution for precise measurements. The hardened stainless steel frame offers corrosion resistance and long life. Its long jaws permit accessibility when measuring large workpieces. The digital, single-value readout LCD shows inch and metric units for versatility when measuring. It has a zero setting for taking intermediate or differential measurements. This caliper has direct metric/inch conversion, and its hold feature freezes the display for later viewing. A preset mode includes an offset measurement for the inside jaws. The knurled lock screw holds the sliding jaw in position and helps ensure a consistent measurement. A thumb-operated roller enables fine adjustments when measuring. This caliper can output data via an RS-232C cable to capture and record data. It comes with a fitted case. This product has 2 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements that are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printe... [Read More]

  • UPC: 646795135017
  • ASIN: B001VY1KLW
  • Brand: Fowler
  • Size: 0-24" Measuring Range, 0.0005" Resolution
  • Manufacturer: Fred V. Fowler Company, Inc.

Fowler Full Warranty Extender Dial Bore Gage Set, 52-646-400, 1.4-6" Measuring Range, 0.0005" Graduation Interval

Fowler Full Warranty Extender Dial Bore Gage Set, 52-646-400, 1.4-6" Measuring Range, 0.0005" Graduation Interval

The Fowler 54-646-400 X-tender Dial Bore Gauge Set has a measurement range of 1.4 to 6" and gradient spacing is 0.0005"/.001mm. A two-point contact system is used to detect geometry problems such as ovality and taper, and carbide-tipped contact points provide extended wear and improved abrasion resistance. The gauge is self-centering and includes an extension holder. This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores. Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.   What’s in the box:   ·         Digital Bore Gage (with 2 measuring heads) ·         1 2” extension ·         4 anvil spacers ·         Instructions ·         Fitted case

  • UPC: 646795124578
  • ASIN: B000XQ2T1E
  • Brand: Fowler
  • Manufacturer: Fred V. Fowler Company, Inc.

Fowler Full Warranty Stainless Steel Shockproof Dial Caliper, 52-008-712-0, 0-12" Measuring Range, 0.001" Graduation Interval, Face Color White

Fowler Full Warranty Stainless Steel Shockproof Dial Caliper, 52-008-712-0, 0-12" Measuring Range, 0.001" Graduation Interval, Face Color White

The Fowler Shockproof stainless steel dial caliper has dial graduations of 0.001" with 0.001"   accuracy, shockproof anti-backlash control, a sliding jaw with a lock, and a covered rack. This caliper is used for measuring inside dimensions (ID), outside dimensions (OD), depth, and step. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Shockproof spring anti-backlash control with a heavy-duty spring offers increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls that prevents the gear teeth from jamming. It is undesirable to have much backlash due to the lack of precision offered by the increased amount of play between gears. Certain gear designs can minimize or eliminate backlash; spring anti-backlash systems use a spring to add a compressive force, thereby minimizing backlash. This caliper has a knurled lock screw to hold the sliding jaw in position and help ensure a consistent measurement. A covered rack prevents dirt and debris from clogging the gear, and helps prevent measurement errors. A thumb-operated fine adjustment roller allows for one-handed use. The caliper measures 0.10” per revolution of the dial. The dial has 0.001" graduations, and the beam has engraved 0.1” graduations. The hardened stainless steel components, including the bar, measuring surfaces, rack, gears, and depth rod, offer corrosion resistance, increased accuracy, and long life. Self-contained movement eliminates gear misalignment, while the dual pinion drive mechanism reduces wear on the rack and pinion. An adjustable dial enables setting zero. The hardened stainless steel is polished to a satin chrome finish, to help prevent glare. This caliper comes with a fitted case. Dial calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pa... [Read More]

  • UPC: 646795101623
  • ASIN: B001C7JNDU
  • Brand: Fowler
  • Size: 0-12" Measuring Range, 0.001" Graduation Interval
  • Manufacturer: Fred V. Fowler Company, Inc.

Fowler 72-008-007 Dial Caliper

Fowler 72-008-007 Dial Caliper

Thumb roll for rapid setting. Beam graduations: .100 4-way jaw for outside, inside, depth and step measurements. Hardened stainless steel throughout with measuring faces precision ground and micro lapped for exceptional accuracy. Knurled lock assures precise settings. Adjustable dial. Dial graduation: .001 Accuracy: ±.001 .100 per revolution Scale surface is satine chrome finished to prevent glare, reduces operator fatigue; microfine graduations read in inches. Supplied in shop-hardened case.

  • UPC: 646795159914
  • ASIN: B005UZ2S0A
  • Brand: Fowler & Nsk
  • Manufacturer: Fowler

Fowler 54-101-150-2 Xtra-Value Cal Electronic Caliper, Stainless Steel, 0 to 6"/0 to 150mm Measuring Range, 0.0005"/0.01mm Resolution, LCD

Fowler 54-101-150-2 Xtra-Value Cal Electronic Caliper, Stainless Steel, 0 to 6"/0 to 150mm Measuring Range, 0.0005"/0.01mm Resolution, LCD

The Fowler full one year warranty electronic caliper, 54-101-150-2, has a 0 to 6” (0 to 150mm) measuring range with 0.0005” (0.01mm) increments for precision and a stainless steel frame for long life. Its digital readout LCD shows inch or metric units for versatility, and either absolute or incremental measurement readings are user-selectable. The electronic caliper measures inside, outside, depth and step values for versatility and includes a protective case and CR2032 lithium battery. This product has 1 year arranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Digital or electronic calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaw attached to a long beam with a marked scale is used to take inside, outside and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed t the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements, which are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for reading measurements. Compared to dial calipers, digital calipers provide measurements that are faster, easier and more error-free, but they are more fragile mechanically and electronically, and do not resist coolant well. Vernier calipers are more durable then digital calipers because they do not have internal moving parts, but they can be more difficult to read. Digital calipers are commonly used in fields such as metalworking, mechanical engineering, machining, carpent... [Read More]

  • UPC: 646795135307
  • ASIN: B0015S6GMM
  • Brand: Fowler
  • Size: 6"/150mm
  • Manufacturer: Fred V. Fowler Company, Inc.

Fowler 52-660-010 Optical Magnifier, 10X Magnification

Fowler 52-660-010 Optical Magnifier, 10X Magnification

The Fowler 52-660-010 optical loupe magnifier has 10X double-element magnification and a transparent acrylic base to enhance the size and resolution of an object or image for a variety of applications including jewelry-making, watch-making, electronic inspection, and various hobbies. Two glass lenses work together to provide high resolution. The flat transparent acrylic base allows the loupe to be placed directly on the specimen without blocking ambient light, making this loupe a good choice for viewing art work, slides, prints, circuit boards, stamps, coins, and lithography. Diopter (D) is a technical term for the measurement of the light curvature and thickness of a lens. A dioptric number and a magnification number are not the same thing. Diopter strength represents a specific magnification power (X). For example, a 5-diopter provides 2.5X magnification (at a distance of 8"). The higher the diopter, the more magnification a lens can provide. As magnification increases, distance to the object (focal length), and field of view (diameter, or narrowness of view) decrease. Magnifiers and prescription eyeglasses have a diopter value, such as 1.5 or 2. The dioptric strength of an accessory lens, such as prescription eyeglasses or an eye loupe, must be added to the dioptric strength of the magnifier to calculate total magnification.Magnifiers are devices used to enlarge the visual appearance of an object or image. Magnifiers come in a variety of styles such as hand-held, headband, standing, clip-on, eye loupe, and those that hang in a necklace form, or fit in a trouser pocket. Magnifiers are commonly made of plastic or glass. They can have one or more lenses with varying magnification abilities, and can have a binocular configuration with a single lens, or two separate lenses. They are sometimes used with LED or fluorescent light sources to help control viewing capabilities. Magnifier ability is often expressed as magnification at a specific length. For example, 1.75X at... [Read More]

  • UPC: 696736064180
  • ASIN: B00B5HK0NE
  • Brand: Fowler
  • Size: 10X Magnification
  • Manufacturer: Fred V. Fowler Company, Inc.

Fowler Full Warranty Stainless Steel Shockproof Dial Caliper, 52-008-706-0, 0-6" Measuring Range, 0.001" Graduation Interval, Face Color White

Fowler Full Warranty Stainless Steel Shockproof Dial Caliper, 52-008-706-0, 0-6" Measuring Range, 0.001" Graduation Interval, Face Color White

The Fowler Shockproof stainless steel dial caliper has dial graduations of 0.001" with 0.001" accuracy, shockproof anti-backlash control, a sliding jaw with a lock, and a covered rack. This caliper is used for measuring inside dimensions (ID), outside dimensions (OD), depth, and step. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Shockproof spring anti-backlash control with a heavy-duty spring offers increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls that prevents the gear teeth from jamming. It is undesirable to have much backlash due to the lack of precision offered by the increased amount of play between gears. Certain gear designs can minimize or eliminate backlash; spring anti-backlash systems use a spring to add a compressive force, thereby minimizing backlash. This caliper has a knurled lock screw to hold the sliding jaw in position and help ensure a consistent measurement. A covered rack prevents dirt and debris from clogging the gear, and helps prevent measurement errors. A thumb-operated fine adjustment roller allows for one-handed use. The caliper measures 0.10" per revolution of the dial. The dial has 0.001" graduations, and the beam has engraved 0.1" graduations. The hardened stainless steel components, including the beam, measuring surfaces, rack, gears, and depth rod, offer corrosion resistance, increased accuracy, and long life. Self-contained movement eliminates gear misalignment, while the dual pinion drive mechanism reduces wear on the rack and pinion. An adjustable dial enables setting zero. The hardened stainless steel is polished to a satin chrome finish, to help prevent glare. This caliper comes with a fitted case. Dial calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair o... [Read More]

  • UPC: 646795101579
  • ASIN: B0014DEXNM
  • Brand: Fowler
  • Size: 1 pack
  • Manufacturer: Fred V. Fowler Company, Inc.

Fowler 74-554-730 Digital Caliper

Fowler 74-554-730 Digital Caliper

Robust housing Large LCD display Reading: .01 in./.1mm/1/64ths Accuracy: .01 in./.3mm/1/64ths Spring loaded with locking nut Internal caliper gauge has direct inch/metric/fraction conversion Battery: CR2032

  • UPC: 021111464116
  • ASIN: B0042SWH7A
  • Brand: Fowler & Nsk
  • Size: 6 to 7.9 Inches
  • Manufacturer: Fowler

Fowler 72-030-006 Caliper by Fowler

Fowler 72-030-006 Caliper by Fowler

Hardened stainless steel throughout;Raised sliding surface prevents wear and defacement of graduations;Range: 6/150mm;Covered stainless steel rack;Included in a fitted case

  • UPC: 735090105136
  • ASIN: B01N4F7A8V
  • Brand: Fowler
  • Manufacturer: Fowler