Hakko FX888D-23BY Digital Soldering Station FX-888D FX-888 (blue & yellow)

Hakko FX888D-23BY Digital Soldering Station FX-888D FX-888 (blue & yellow)

Reliable digital technology by HAKKO – Introducing the HAKKO FX-888D Excellent thermal recovery Heater output has been increased by 30% compared to that of the conventional models HAKKO 936·937. Also FX-888D delivers excellent thermal recovery by using T18 series tips for their terrific heat conductivity. This allows soldering at a lower set temperature and reducing the thermal impact on components as well as tip oxidation that can shorten tip life. Thermal recovery graph Rise time to 350Degree C is 20 seconds faster and tip temperature drop is reduced during continuous work.

  • UPC: 641328058276
  • ASIN: B00ANZRT4M
  • Brand: Hakko
  • Size: 70W / 120VAC
  • Manufacturer: Hakko

Hakko Soldering Station, FX-951-66

Hakko Soldering Station, FX-951-66

' Soldering Station, Digital, Watts 75, Voltage 120, Soldering, ESD Safe, Closed Loop Sensor, Includes Mfr. No. FM-2027 Soldering Handpiece and FH-200 Series Holder '

  • UPC: 641328007229
  • ASIN: B0012B8NW8
  • Brand: AMERICAN HAKKO PRODUCTS INC
  • Manufacturer: HAKKO

Digital Soldering Station with Chisel Tip Pack T18-D08/D12/D24/D32/S3

Digital Soldering Station with Chisel Tip Pack T18-D08/D12/D24/D32/S3

Reliable digital technology by HAKKO – Introducing the HAKKO FX-888D Excellent thermal recovery Heater output has been increased by 30% compared to that of the conventional models HAKKO 936·937. Also FX-888D delivers excellent thermal recovery by using T18 series tips for their terrific heat conductivity. This allows soldering at a lower set temperature and reducing the thermal impact on components as well as tip oxidation that can shorten tip life. Thermal recovery graph Rise time to 350Degree C is 20 seconds faster and tip temperature drop is reduced during continuous work. HAKKO FX-888D performance comparison graph with conventional stations Able to shorten the time required for the same work and improve work efficiency significantly. Designed to be User-Friendly Small footprint Compact station body requires a space of only 100 (W) x 120 (D) mm. What’s more, points that come into contact with the floor are positioned as close to the outer edge of the body as possible to improve stability and make the station difficult to fall over. Simple and easy operation With only two operation buttons of UP and ENTER in the center, operation is simple and easy. Even if you’re not familiar with operation of machines, you can operate it without difficulty. Iron holder with full of functions An iron holder of the same color of a soldering station comes as a set. The highly functional iron holder not only improves ease of use, but also brings a sense of visual consistency to the work environment. Silver Soldering station Iron holder Blue & yellow Soldering station Iron holder Strict temperature management Digital display The FX-888D’s digital display makes it easy to check the set temperature at a glance.

  • UPC: 818497013041
  • ASIN: B00C1N30DI
  • Brand: Hakko
  • Manufacturer: Hakko

Hakko FX888D29BY/P ESD-Safe Digital Soldering Station w/ FX8801 Soldering Iron and T18D16 Tip (Gold)

Hakko FX888D29BY/P ESD-Safe Digital Soldering Station w/ FX8801 Soldering Iron and T18D16 Tip (Gold)

Hakko FX888D-29BY/P ESD-Safe Digital Soldering Station (Gold) is an updated digital version of the popular FX-888 and includes several new features. User selectable preset temperatures and digital calibration simplify user setup and operation, and the new password protection and low temperature alarm provides process control and helps protect against cold solder joints.

  • UPC: 641328062068
  • ASIN: B00OSM27T8
  • Brand: Hakko
  • Manufacturer: Hakko

Hakko FX888D,T18-B,BL,I,D24,D32,C05,S7,599-029 Soldering Station with T18-B/BL/I/D24/D32/C05/S7/599-029

Hakko FX888D,T18-B,BL,I,D24,D32,C05,S7,599-029 Soldering Station with T18-B/BL/I/D24/D32/C05/S7/599-029

Reliable digital technology by HAKKO – Introducing the HAKKO FX-888D Excellent thermal recovery Heater output has been increased by 30% compared to that of the conventional models HAKKO 936·937. Also FX-888D delivers excellent thermal recovery by using T18 series tips for their terrific heat conductivity. This allows soldering at a lower set temperature and reducing the thermal impact on components as well as tip oxidation that can shorten tip life. Thermal recovery graph Rise time to 350Degree C is 20 seconds faster and tip temperature drop is reduced during continuous work. HAKKO FX-888D performance comparison graph with conventional stations Able to shorten the time required for the same work and improve work efficiency significantly. Designed to be User-Friendly Small footprint Compact station body requires a space of only 100 (W) x 120 (D) mm. What’s more, points that come into contact with the floor are positioned as close to the outer edge of the body as possible to improve stability and make the station difficult to fall over. Simple and easy operation With only two operation buttons of UP and ENTER in the center, operation is simple and easy. Even if you’re not familiar with operation of machines, you can operate it without difficulty. Iron holder with full of functions An iron holder of the same color of a soldering station comes as a set. The highly functional iron holder not only improves ease of use, but also brings a sense of visual consistency to the work environment. Silver Soldering station Iron holder Blue & yellow Soldering station Iron holder Strict temperature management Digital display The FX-888D’s digital display makes it easy to check the set temperature at a glance.

  • UPC: 818497013034
  • ASIN: B00C2BHTBI
  • Brand: Hakko
  • Manufacturer: Hakko

T12 Series Solder Iron Tips for Hakko Soldering Station FX-951 FX-952

T12 Series Solder Iron Tips for Hakko Soldering Station FX-951 FX-952

ne to process, the tip size very precise; Lead-free alloy iron electric plating close-grained, very long life about 3-4 times compared to domestic products; Product surface use special material handling, tip end with coating processing, so as to ensure the tip not turn black under the high temperature; Good performance in tin-on and tin melting, solder joints uniform, and fluent soldering; With high anti-oxidation, good moist performance, quick thermal conductivity, the product quality has reac hed the world's top. 10 pcs tips(each model 1 pcs) Models : T12-B T12-BC2 T12-D4 T12-C1 T12-C4 T12-D08 T12-D24 T12-I T12-JL02 T12-K Package included : 10 x T12 Series Solder Iron Tips

  • UPC: 769823018110
  • ASIN: B01M4PV4TR
  • Brand: Solder Iron Tips for Hakko
  • Manufacturer: SOLDERINGWELDINGTO-BGG-HOTSALE0134

Hakko FX951-66 T15-D08,D12,D24,D32,D52 Soldering Station with Chisel Tip T15-D08/D12/D24/D32/D52, Blue/Yellow

Hakko FX951-66 T15-D08,D12,D24,D32,D52 Soldering Station with Chisel Tip T15-D08/D12/D24/D32/D52, Blue/Yellow

Bring a new design to your Workstation with the fx-951 soldering station. This station delivers the superior heat transfer and thermal recovery and uses quick-change composite tips. Includes: fx951-66, soldering station, fm-2027 connector with green sleeve assembly, fh200-01 iron holder with 599B tip cleaner, key card, heat pad, tip tray, connector and power cords. Features: compact, space-saving design lockout key car prevents unauthorized changes to temperature settings low temperature alarm warns operation of potential cold joints locking sleeve assembly optional sleep mode functionality with iron holder auto power shutoff after 30 minutes adjustable iron holder angle specifications: station: power consumption: 75W temperature range: 200-450degree C (400-840degree F) temperature stability: 5Degree C (9Degree F) output: 24V fm-2027 hand piece: power consumption: 70W (24V) tip-to-ground resistance: < 2ω tip-to-ground potential: < 2mV. The FX951 isn't normally supplied with soldering tip/heater assembly. This bundle, however, includes the convenient T15 Series chisel tip Pack Hakko t15-d08 0.8mm, t15-d12 1.2mm, t15-d24 2.4mm, t15-d32 3.2mm, and t15-d52 5.2mm.

  • UPC: 818497014178
  • ASIN: B01BI39P1M
  • Brand: Hakko
  • Manufacturer: American Hakko

Bundle Includes Soldering Station and CHP170 Cutter

Bundle Includes Soldering Station and CHP170 Cutter

Reliable digital technology by HAKKO – Introducing the HAKKO FX-888D Excellent thermal recovery Heater output has been increased by 30% compared to that of the conventional models HAKKO 936·937. Also FX-888D delivers excellent thermal recovery by using T18 series tips for their terrific heat conductivity. This allows soldering at a lower set temperature and reducing the thermal impact on components as well as tip oxidation that can shorten tip life. Thermal recovery graph Rise time to 350Degree C is 20 seconds faster and tip temperature drop is reduced during continuous work. HAKKO FX-888D performance comparison graph with conventional stations Able to shorten the time required for the same work and improve work efficiency significantly. Designed to be User-Friendly Small footprint Compact station body requires a space of only 100 (W) x 120 (D) mm. What’s more, points that come into contact with the floor are positioned as close to the outer edge of the body as possible to improve stability and make the station difficult to fall over. Simple and easy operation With only two operation buttons of UP and ENTER in the center, operation is simple and easy. Even if you’re not familiar with operation of machines, you can operate it without difficulty. Iron holder with full of functions An iron holder of the same color of a soldering station comes as a set. The highly functional iron holder not only improves ease of use, but also brings a sense of visual consistency to the work environment. Silver Soldering station Iron holder Blue & yellow Soldering station Iron holder Strict temperature management Digital display The FX-888D’s digital display makes it easy to check the set temperature at a glance.

  • UPC: 818497012280
  • ASIN: B00AWUFVY8
  • Brand: Hakko
  • Manufacturer: Hakko

Hakko Soldering Station, Dual Port, FM-203, With Conversion

Hakko Soldering Station, Dual Port, FM-203, With Conversion

Hakko FM203-DP ESD-Safe Dual Port Soldering Station with Two FM2027 Soldering IronsA wide range of handpiece selectionFigures of connectable handpieces are shown on the connectors as well as the indications of Channel D and Channel S.Buzzer ON/OFF setting is availableWhether to make the buzzer sound or not when an error occurs or a target temperature is reached is settable.Power Save FunctionA programmable sleep mode of 0-29 minutes or auto-power shut off at 30 minutes.A single station plays multiple roles: Soldering, desoldering, and SMD reworkThe Hakko FM-203 is a Dual Port high performance soldering station. Even when soldering lead-free solders the high performance allows lower operating temperatures. The soldering station can operate any of the following hand pieces, FM-2027 Soldering Iron, FM-2022 Parallel Remover (SMD tweezer), FM-2023 Mini Parallel Remover (SMD mini tweezer), FM-2024 Desoldering Module, and/or FM-2026 Nitrogen Soldering Iron. The soldering iron and desolder tool can be used in either or both ports and the tweezers are limited to one port with a soldering or desoldering iron in the other port.The station features a programmable sleep mode of 0-29 minutes or auto-power shut off at 30 minutes. Sleep mode, auto power shut off and tip temperature can be programmed separately for each port. The sleep mode reduces the tip temperature to approximately 200C (400F) after the programmed time (0-29 minutes). The lower tip temperature will reduce oxidation of the tip and improve the tip performance. When in sleep mode the tip will quickly return to temperature after the iron is removed from the holder.Two handpieces can be selected in various combinations*This station is equipped with two HAKKO FM-2027 handpieces.A wide range of handpiece selection- Figures of connectable handpieces are shown on the connectors as well as the indications of Channel D and Channel S.Handpiece combin

  • UPC: 641328052588
  • ASIN: B0012B51EQ
  • Brand: AMERICAN HAKKO PRODUCTS INC
  • Manufacturer: Hakko

Hakko FX951-66, T15-D16 Soldering Station with T15-D16, 1.6 mm Chisel Tip, Blue

Hakko FX951-66, T15-D16 Soldering Station with T15-D16, 1.6 mm Chisel Tip, Blue

Bring a new design to your Workstation with the fx-951 soldering station. This station delivers the superior heat transfer and thermal recovery and uses quick-change composite tips. Includes: fx951-66, soldering station, fm-2027 connector with green sleeve assembly, fh200-01 iron holder with 599B tip cleaner, key card, heat pad, tip tray, connector and power cords. Features: compact, space-saving design lockout key car prevents unauthorized changes to temperature settings low temperature alarm warns operation of potential cold joints locking sleeve assembly optional sleep mode functionality with iron holder auto power shutoff after 30 minutes adjustable iron holder angle specifications: station: power consumption: 75W temperature range: 200-450degree C (400-840degree F) temperature stability: 5Degree C (9Degree F) output: 24V fm-2027 hand piece: power consumption: 70W (24V) tip-to-ground resistance: < 2ω tip-to-ground potential: < 2mV. The FX951 isn't normally supplied with soldering tip/heater assembly. This bundle includes a free 1.6mm chisel tip soldering tip/heating element (Hakko t15-d16).

  • UPC: 818497013720
  • ASIN: B00OBQGLGG
  • Brand: Hakko
  • Manufacturer: American Hakko