Ten Ryu MA-2SD Two-Tier Sword Stand, Black Lacquer Finish
Ten Ryu MA-2SD Two-Tier Sword Stand, Black Lacquer Finish
Show off your swords in style with this beautiful Two-Tier Sword Stand in black lacquer finish (model MA-2SD) from Ten Ryu, which displays up to two swords. This stand has a black lacquer finish and red velvet holders and has the Ten Ryu logo on the front in gold. Simple, classic and designed to show off your beautiful collection without distracting from the artistry of the swords. Ten Ryu offers a wide range of affordable Samurai swords, which are hand sharpened to ensure the sharpest blade. Swordsmiths combine modern knowledge and traditional secrets to produce superior quality swords with enhanced durability, sharpness, and exquisite craftsmanship.
- UPC: 805319112877
- ASIN: B0060E7DNC
- Brand: Ten Ryu
- Size: Black Lacquer Finish, Red Velvet Holders
- Manufacturer: Masahiro
Ace Martial Arts Supply Single Sword Display Stand
Ace Martial Arts Supply Single Sword Display Stand
Scottish Dirk 9'' Overall Length, 3/16" thick. Blade: Double Edged looh but only sharp on one edge. Heavy Weight 440 Stainless Steel Blade.
- UPC: 615953352030
- ASIN: B001F4S0Y8
- Brand: Ace Martial Arts Supply
- Manufacturer: Ace Martial Arts Supply
Sword Stand Holder Black Lacquer Finish Samurai Sword Bracket Katana Wakizashi Tanto Display Stand 3-Tier
Sword Stand Holder Black Lacquer Finish Samurai Sword Bracket Katana Wakizashi Tanto Display Stand 3-Tier
Eforlife -- Decent Black Lacquer Display Stand for Samurai Swords Ver handy, it only takes a minute to install it. Specifications: Material: Density board. Color: Black Lacquer Finish Size:12.2 inches Wide x 15 inches High Sturdy enough to support common samurai swords Package: 1x Sword holder including screws Any questions relating to this product, please feel free to contact us via your buyer email. Eforlife is committed to help！
- UPC: 702756229802
- ASIN: B019F0HEW2
- Brand: Eforlife
- Manufacturer: Eforlife
Eforlife Sword Holder Wall Mount Samurai Sword Katana Wakizashi Display Holder Stand Bracket Hanger 1-Tier (13.7 inch Hollow)
Eforlife Sword Holder Wall Mount Samurai Sword Katana Wakizashi Display Holder Stand Bracket Hanger 1-Tier (13.7 inch Hollow)
Eforlife -- Decent Wall Mount For Swords Specifications: Material: Compressed wood.Notch: 1.38 inch11.4 inch size: 28.5*16cm / 11.4*6.3inch (L*H) 13.7 inch Size: 35x19.5 cm / 13.7x7.6 inch (L*H)13.7 inch hollow: 35x18cm / 13.7x7.1 inch (L*H) Big enough for general swords One layer Designed for wall: 1. Put the nails in the wall 2. There are two holes in the holder back where the nails fit in once you put the screws in the wall. 3. Hang the sword holder on the screws (you don't nail the actual board to the wall) Package: 1x Sword holder 2x Nails Accessories for assemblyThe mount is easy to install, please contact us if there is any question relating to the product. Our customer service is committed to help : )
- UPC: 709202861609
- ASIN: B074X4LVS8
- Brand: Eforlife
- Manufacturer: Eforlife
Eforlife Velvet Protect Sword Wall Mount Sword Holder Display Stand with Felt Strips for Katana Wakizashi Genji and Samurai Swords (4 Tier Bushido - 武)
Eforlife Velvet Protect Sword Wall Mount Sword Holder Display Stand with Felt Strips for Katana Wakizashi Genji and Samurai Swords (4 Tier Bushido - 武)
Eforlife -- Decent Ornate Wall Mount for Samurai Swords Display Specifications: Felt Strip: Velvet to prevent scratches Color: All balck Material: Wood 1-Tier Classic Size: 38*18cm/15*7inch(L*H)3-tier size: 38 x 23 cm / 15 x 9 inch (Length x Height)4-tier size: 38cm (15inch) in length / 32 cm(12.6 inch) or 36.5cm (14.5inch) in height All wood pieces are in excellent shape and mounting hardware are spot on. Sturdy Enough to hold a basic samurai sword ►Breeze Installment ●Assembly: Slide the two end pieces on to the main piece. ●Hang the sword holder: There are two holes on the holder back where the nails fit in once you put the screws in the wall. Package: 1x Sword holder Mounting hardware
- UPC: 709202859439
- ASIN: B07KQ251K3
- Brand: Eforlife
- Manufacturer: Eforlife
Tenryu Ma-1Sd Lacquer Single Stand Black
Tenryu Ma-1Sd Lacquer Single Stand Black
The Masahiro MA-1SD is a perfect solution to a Japanese sword collector. It boast a black glossy lacquer finish and red velvet holder to not only display your prize collectible, but also protects the sword from rough surfaces.
- UPC: 805319115403
- ASIN: B0060E7EJU
- Brand: Ten Ryu
- Manufacturer: Master Cutlery LLC
Eforlife Sword Holder Wall Mount Japanese Samurai Sword Display Stand Hanger Bracket for Japanese Katana Wakizashi Tanto 3 Layer (C)
Eforlife Sword Holder Wall Mount Japanese Samurai Sword Display Stand Hanger Bracket for Japanese Katana Wakizashi Tanto 3 Layer (C)
Eforlife -- Decent Wall Mount for Japanese / Chinese / General Samurai Swords Specifications: Color: All balck, a great decoration for swords.Material: Density wood. A Size: 29 * 34cm / 11.4 * 13.4 inch (L*H)B Size: 35* 40 cm / 13.7 *15.7 inch ( L*H ) Sturdy enough to hold common samurai swords Three layer Instruction Install the bottom brace: Press two wooden wedges into the holes on either side. Install the top bar: Put the mounted screws through the holes and simply screw on a cap to keep them in place. Hang the sword holder: There are two holes in the holder back where the nails fit in once you put the screws in the wall. Package: 1x Sword holder 2x Nails Any questions relating to this product, please feel free to contact us via your buyer email.
- UPC: 709202861845
- ASIN: B075D85BT9
- Brand: Eforlife
- Manufacturer: Eforlife
Eforlife 2-Tier Sword Holder Wall Mount Samurai Sword Display Stand Hanger Hollow Out Pattern for Katana Wakizashi and Standard Swords (Dragon-龍)
Eforlife 2-Tier Sword Holder Wall Mount Samurai Sword Display Stand Hanger Hollow Out Pattern for Katana Wakizashi and Standard Swords (Dragon-龍)
Eforlife -- Decent Ornate Wall Mount for Swords Display Specifications: Material: Density board. Color: All black Dual hanging capacity 2 layers to hold two standard samurai swords All wood pieces are in excellent shape and mounting hardware are spot on. √ We suggest you to display sword that is longer than 15 inches. ►Breeze Installment ●Assembly: Slide the two end pieces on to the main piece. ●Hang the sword holder: There are two holes on the holder back where the nails fit in once you put the screws in the wall. Package: 1x Sword holder Mounting hardware The mount is easy to install, please contact us if you have any questions relating to this item.
- UPC: 709202864655
- ASIN: B06Y5KT8JM
- Manufacturer: Eforlife
CNLQ Wooden Single Samurai Sword Stand Display for Katana Wakizashi Tanto
CNLQ Wooden Single Samurai Sword Stand Display for Katana Wakizashi Tanto
Single Sword Stand is designed to display your sword horizontally on tabletop. It is constructed of hard wood with a solid black finish. It fits one Japanese Katana, Wakisazhi or Tanto. This is an essential piece for any sword collector. The assembly is simply and only takes seconds to complete.
- UPC: 705883998658
- ASIN: B07NZ75LXN
- Brand: CNLQ
- Manufacturer: CNLQ
Handmade Sword - Black Wood 8 Tier Table Stand for Katana and Wakizashi Sword, Swords Display
Handmade Sword - Black Wood 8 Tier Table Stand for Katana and Wakizashi Sword, Swords Display
Handmade Sword, is a well known and authentic hand-for gesword company. We are professional and specialized in hand-forging Japanese samurai swords. We have a full range of Katana, Wakizashi, tan to sword and other sword's accessories. Swords from Handmade Sword are all hand made in traditional ways by skilled and experienced swordsmiths. Handmade Sword strives for making the highest quality swords in the past decades. Which makes us one of the best sword sellers in this industry. We believe in keeping customers happy and providing them with the best sword at competent price. Traditional Forging Method: Heat Tempered or Clay Tempered. Blade: All Handmade Swords blades are full tang, engraved with signature of sword smith. And it can be fully disassembled and assembled. Most of our functional blades are made of high carbon content steel. Also, there are blades made of stainless steel or aluminum alloy for I a I do training swords. Tsuba and other fittings: Most fittings are made by brass. For Tubas, we use copper, or brass, or iron, or alloy. It depends on each tsuba. Handle and Saya (Scabbard): Wooden or other specified. Most handles covered by ray skin and Japanese cotton Ito.
- UPC: 065225023791
- ASIN: B004U00CSQ
- Brand: Handmade Sword
- Manufacturer: Handmade Sword