Evike Firefox/Intellect Lipoly Battery Smart Charger and BMS Unit Standard Universal Type - (30777 )

Evike Firefox/Intellect Lipoly Battery Smart Charger and BMS Unit Standard Universal Type - (30777 )

For Lipoly Battery with standard BMS charging plug (XH 4-Pin & 3-Pin Charging Connector.) This full featured 7.4v & 11.1v LIPO/LiFePO4 Balance charger is an amazing value. VERY popular for smaller capacity (mAh) Airsoft and other custom battery packs. Power Supply already included. Ready to charge your LIPO/LiFePO4 packs right out of the package. Charging: The charger is a smart charger. Plug and play / easy to use. The light will turn green when its fully charged and red when its charging. Always monitor your battery charging and charge your lipoly battery only on non-flammable surface. Average charging time depends on how much power is left inside the battery and battery capacity. (1500mah is around 30 minute to a hour). Specifications: Applicable Battery Types: LiPo,Li-ion, and LiFePO4 Battery Count: 2~3 cells Input Voltage: DC 10~16V, 1.5A Charging Current: 1A Balancing Current: 50mA Balancing Precision: 25mA Output Connector: 3 pin and 4 pin JST Connector Red LED: Charging ; Green LED: Fully Charged and Balanced WARNING: Never attempt to charge 2 battery packs simultaneously Never leave the charger unattended when it's connected to the power supply Never place it on case seat, carpet or something similar. Place the product on heat-resistant, non-flammable and non-conductive surface Terminate charging when any malfunctions is observed Keep away from dust,damp, water, heat, direct sunshine and vibration Do NOT charge the following types of battery: Lead acid battery or VRLA NiMH or NiCD battery pack Non-rechargeable battery (explosion hazard) Faulty or damaged battery Any other types except for LiPo/Li-ion/LiFePO4 battery packs Battery pack which consist of different types of cell, or different brands

  • ASIN: B019PGNAV0
  • Brand: Evike
  • Size: 3 Piece Set
  • Manufacturer: Firefox/Intellect

36V 2A Battery Charger Output 42V 2A Charger Input 100-240 VAC Lithium Li-ion Li-Poly Charger for 10Series 36V Electric Bike

36V 2A Battery Charger Output 42V 2A Charger Input 100-240 VAC Lithium Li-ion Li-Poly Charger for 10Series 36V Electric Bike

36V charger for 10series lithium li-ion battery ,with 5.5*2.1mm connector, for 36V 37V 10S lithium battery pack, for electric bike ,skate board,electric scooter.Red light -- charging , green light -- charge OK, it stop automatically when the battery is full.

  • UPC: 611434481275
  • ASIN: B071V46GFJ
  • Brand: Jnenconn
  • Manufacturer: Jnenconn

Parallel (6x) JST-PH Charge & Balance Cable for UMX

Parallel (6x) JST-PH Charge & Balance Cable for UMX

Our parallel charge leads allow you to charge up to six battery packs simultaneously. Constructed from the highest quality materials, they give you the best connection possible every time you charge your batteries. This unique design serves as both a charging and balancing cable for up to 6 of your 2S battery packs. Connect to your batteries with the JST-PH connectors, as used in the Beast UMX or Sbach 342 UMX. Connect to the charger's main output with 4mm banana plugs, and to the balance port with a standard 2S JST-XH balance connector. 4" of top-quality silicone wire gives you the flexibility you need to easily get everything connected. Specifications Input Charge Connector: Male 4mm Banana Plug Input Balance Connector: Male 2S JST-XH Output Connector: 2S Female JST-PH Wire Type: 24 AWG Silicone Charge Lead, 26 AWG Silicone Balance Lead Length: 4"

  • ASIN: B00CD9Y77I
  • Brand: ProgressiveRC
  • Manufacturer: ProgressiveRC

Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery Pack Charger for NiMH/NiCD/Li-PO/Li-Fe Packs w/ LCD Display Hobby Battery Charger w/ Tamiya/JST/EC3/HiTec/Deans Connectors + Power Supply

Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery Pack Charger for NiMH/NiCD/Li-PO/Li-Fe Packs w/ LCD Display Hobby Battery Charger w/ Tamiya/JST/EC3/HiTec/Deans Connectors + Power Supply

* NiMH/NiCD 1~15 cells ( 1.2v to 18v) * Li-PO/Lithium Ion 1~6 series ( 3.7v to 22.2v) * Li-Fe 1~6 series * Sealed Lead Acid (SLA) * Charge your NiMH/NiCD Receiver Packs: 3.6v, 4.8v, 6v, or 9.6v * Charge your LiFE Packs: 6.6v * Charge your normal NiMH/NICD Packs: 7.2v, 8.4v, 9.6v, 10.8v, 12v * Charge your High Performance LIPO Packs: 7.4v, 11.1v, 14.8v, 18.5v * Charge your Airsoft NiMH/NICD Packs: 8.4v, 9.6v, 12v * Charge your Airsoft LIPO/LiFe Packs Future proof yourself for any new battery pack or upgrades, instead of having constantly buy 1 charger for each type of pack. Note: to charge Mini Airsoft packs, you need a Standard Tamiya to Mini Tamiya Connector which is sold separately. Charger Specifications: DC 11V~15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit. You can also select a extra Wall Plug AC-DC12V/5A Switching Power as a power source. Specification Operating voltage DC 11~18 volts AC 100~240V, 50/60Hz Charge/discharge power max. 50/5 Watts Pb 2~20V Charge current 0.1 to 5.0A Discharg current 0.1 to 1.0A No. of cycle 1 to 5 times Dimension 130x85x33 mm< User's setting-up parameters Battery voltage type LiIo:3.6V, LiPo:3.7V, LiFe:3.3V NiCd Delta-peak voltage sensitivity 1 to 20mV NiMH Delta-peak voltage sensitivity 1 to 20mV Battery temperature cut-off 20 to 80C or OFF Waiting time between charge/discharge 1 to 60 min. Integral timer limit for safety 10 to 720 min.or OFF Maximum charging capacity limit for safety 10 to 9990mAh or OFF Key beep and buzzer sound ON/OFF Input DC power low alert 10 to 11V ###Please do NOT use this charger with any pack that doesn't have a built-in protection circuit board/module (PCB/PCM)

  • UPC: 793631761166
  • ASIN: B00466PKE0
  • Brand: Tenergy
  • Manufacturer: Tenergy

Tenergy TN267 1-4 Cells Li-Po/Li-Fe Balance Charger for Airsoft & RC Car Battery Packs with 1S to 4S XH Type Balance Connector

Tenergy TN267 1-4 Cells Li-Po/Li-Fe Balance Charger for Airsoft & RC Car Battery Packs with 1S to 4S XH Type Balance Connector

Features and Benefits * Built-in balancer. Batteries are automatically balanced during charging, ensuring full charge * Advanced individual charging method-charge each cell individually * Automatically charging process - makes it easy to use * Lightweight and compact design * Safer and faster charging for better battery performance and life * Fits 1S to 4S Li-PO/Li-Fe battery packs with XH type balance connector * Multiple protection features provide maximum safety * Charge Rate: 1A (1,000mah per hour) * Applicable for Li-ion, LiPo and LiFePO4 battery packs Specifications Input: DC 10-16V, 1.0-1.5A Output: DC 4.2V/16.8V (Li-PO) DC 3.6V/ 14.4V (Li-FE) Charging Current: 1.0A Battery Type: Li-PO/Li-lon/Li-Fe Dimension: 88 x 57.3 x 16.8 mm Weight: 110g (Adapter) +100g (Charger) Reserve Polarity Protection: YES Short-Circuit Protection: YES Input Voltage Protection: YES WARNING - DO NOT charge the following types of battery: * Lead acid battery or VRLA * NiMH or NiCD battery pack * Non-rechargeable battery (explosion hazard) * Faulty or damaged battery * Any other types except for LiPo/Li-ion/LiFePO4 battery packs.

  • UPC: 844949021005
  • ASIN: B004FGWY54
  • Brand: Tenergy
  • Manufacturer: Tenergy

Traxxas 2970 EZ-Peak Plus 4-Amp NiMH/LiPo Fast Charger with iD Auto Battery Identification

Traxxas 2970 EZ-Peak Plus 4-Amp NiMH/LiPo Fast Charger with iD Auto Battery Identification

The Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus (#2970) does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Plus' Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. 4-amp fast charging and advanced high-resolution peak detection deliver a perfect charge every time. The EZ-Peak Plus is backed by the Traxxas Lifetime Electronics Warranty for years of reliable service.

  • UPC: 020334297006
  • ASIN: B00OAFYLJC
  • Brand: Traxxas
  • Size: Basic pack
  • Manufacturer: Traxxas

Tenergy RC Battery Charger for NiMH/NiCd 7.2V-12V 6S-10S Battery Packs, Smart Charger for RC Cars, RC Airplanes, Airsoft Batteries, Compatible with Standard Tamiya/Mini Tamiya/Alligator Clip Connector

Tenergy RC Battery Charger for NiMH/NiCd 7.2V-12V 6S-10S Battery Packs, Smart Charger for RC Cars, RC Airplanes, Airsoft Batteries, Compatible with Standard Tamiya/Mini Tamiya/Alligator Clip Connector

Accessories Included1 standard Tamiya connector.1 connector adapter from Standard to Mini Tamiya.1 set of alligator clip adapter with standard Tamiya connector on one end.1 Temperature sensorSpecificationInput: AC100-240VOutput: 7.2-12V 0.9or1.8AOperation InstructionConnect battery pack to output connector and plug AC power sourceMake sure battery polarity is connected correctly (Red wire is positive)Charger will detect battery voltage automatically, Red LED will be on during chargingWhen battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be onApproximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh batteryBattery pack capacity should be 900mAh or higherPlease contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by MisusageCautionThe charger is designed for indoor use only. Don't leave the charger unattended during chargingThe charger should be positioned horizontally and in well ventilated condition, avoid water and keep away from flammable/explosive goodsDon't cover the charger when charging, ambient temperature shall not be more than 40oCDon't leave the batteries and chargers on wood surface/carpetCut off the power supply before connect/disconnect the charger with batteriesDon't disassemble the charger, High voltage inside!WARNING - DO NOT CHARGE LiPO BATTERIES-DO NOT CHARGE: if the label on your battery says: LiPO, LIPO, Li-Po, LI-PO, Li-Polymer, Li-Poly, Lithium Polymer, Li-ion, Lithium-Ion, Lithium-Caution: LiPO battery packs may often have two sets of leads/connectors - do not charge if identified as LiPO battery**Failure to follow these warnings may result in fire or personal injuryContact our customer support team if you are unsure if your battery can be charged

  • UPC: 787721636342
  • ASIN: B001AVUAVC
  • Brand: Tenergy
  • Manufacturer: Tenergy

Tenergy Smart Charger for 8.4V-9.6V NiMH Battery Packs w/Mini Tamiya Connector + Standard Tamiya Adapter

Tenergy Smart Charger for 8.4V-9.6V NiMH Battery Packs w/Mini Tamiya Connector + Standard Tamiya Adapter

Use it for any 8.4v-9.6v NiMH Battery Packs that are used in RC Cars/Airplanes. Just make sure connector is Standard or Mini Tamiya!Features*Smart Charger for NiMH battery packs of 8.4V-9.6V (7-8 cells).*Recommended battery packs with capacity of 600-2000mAh.*Able to auto distinguish bad battery and indicate malfunction.*Able to activate over-discharged cells. *Current ram-up way benefits cell capacity and life cycle.*Automatically stop when battery pack is fully charged by Delta Peak detection.*Short circuit & reverse polarity protections.*Built in mini male tamiya connector.Includes*Smart AC Charger for 8.4-9.6V NiMH Battery Pack*Instruction Manual*Mini Tamiya to Standard Tamiya AdapterSpecificationsRating Input Voltage: 100~240V AC 50/60HzRating input current: 2AmpInput power:

  • UPC: 844949005708
  • ASIN: B004W8H5CM
  • Brand: Tenergy
  • Manufacturer: Tenergy

Adafruit 259 , USB Li-Ion/LiPoly Charger, v1.2

Adafruit 259 , USB Li-Ion/LiPoly Charger, v1.2

This is a lithium ion and lithium polymer battery charger based on the MCP73833. It uses a USB mini-b for connection to any computer or 'USB wall adapter'. charging is done in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-voltage trickle charge to keep the battery topped-up. The fast-charge current is 500MA by default, but is easily adjustable from 100MA up to 1000MA by soldering a through-hole resistor on-board. This board is great for DIY projects because it has 3 indicator LEDs - one for power, one for charging status and a third that indicates when charging is complete. You may also keep the battery connected to the charger and pass power through the additional jst connector using the included cable.

  • ASIN: B00E4WLX1K
  • Brand: Adafruit
  • Manufacturer: Adafruit Industries

Goodfans Mini 4 Port USB Li-Poly Charger for Hubsan H107 Quadcopter/Wltoys Helicopter/Syma X5C/UDI U816 UFO

Goodfans Mini 4 Port USB Li-Poly Charger for Hubsan H107 Quadcopter/Wltoys Helicopter/Syma X5C/UDI U816 UFO

100% Brand New. Item: Battery Charger Dimension: 4 x 3.7 x 1.2cm/1.6 x 1.4 x 0.5 inch (L x W x T) Features: Over charge protection Design: Short circuit protection Voltage Input: DC 5V Voltage Output: 4.3V Use: Vehicles & Remote Control Toys Application: Use for Walkera V929 939 385 H107L, 1S battery Portable and lightweight. Charging 4 batteries at one time. Package Content: 1 x Charger, 1 x USB Cable

  • UPC: 747150827681
  • ASIN: B01AAGAKI0
  • Brand: Goodfans
  • Manufacturer: Goodfans