Best Lse Lights

Rextin 50M 164ft 10MM 3M Double Sided Tape strong Adhesive for 5050 5630 SMD LED Strip Lights Specifications : Size: 10mm*50M*0.15mm Material: Non woven fabric, acrylic acid adhesive Short Time Temp Resistant: 120 centi-degree Long Time Temp Resistant: 90 centi-degree Product Description Made of non-woven cloth and coating with acrylic on both sides, half transparant color, very easy to operate, good Durability, temperature withstanding, strong adhesive, waterproof. RoHS Product Certification Usage: normally used for case, pannel, lcd, led, etc. adhesive. Application Techniques 1. Bond strength is dependent upon the amount of adhesiveto- surface contact developed. Firm application pressure develops better adhesive contact & thus improves bond strength. 2. To obtain optimum adhesion, the bonding surfaces must be clean dry and well unified. A typical surface cleaning solvent is isopropyl alcohol & water. Use proper safety precautions for handling solvents. 3. Ideal tape application temperature range is 21°C to 38°C (70°F to 100°F). Initial tape application to surfaces at temperatures below 10°C(50°F) is not recommended because the adhesive becomes too firm to adhere readily. However once properly applied low temperature holding is generally satisfactory. Tips * Pleas be sure the surface is clean before adhesive, * Best adhesive temperature is 21~38C. * Total size around 50 meters available, we can customize for you. * Picture is for your reference, acutal width is as per acutal tape. Thanks! Package include: 1 x 50M 164ft 10mm Tape strong adhesive