M-Audio Bass Traveler | Portable Powered Headphone Amplifier with Dual Outputs and 2-Level Boost

M-Audio Bass Traveler | Portable Powered Headphone Amplifier with Dual Outputs and 2-Level Boost

The M-Audio Bass Traveler is a portable headphone amplifier with a pair of 1/8-inch headphone jacks, so you can increase the quality of what you’re listening to, then share it with someone else. The sound quality out of a mobile device’s headphone jack or coming from the standard-issue computer’s soundcard leaves a lot to be desired, even if you’ve got spectacular headphones. Many personal digital music players have a limited output for driving high-quality headphones, but the Bass Traveler has a two-level gain switch to boost the signal level, so the sound is always crisp and clear. It is ideal for use with virtually all headphones from 16-100 ohms, so you can get full performance out of your top-notch brand or just get more bass in your earbuds. A rotary on/off/volume control makes it easy to operate. The long-lasting built-in rechargeable lithium polymer battery provides several hours of uninterrupted listening enjoyment. There is an LED indicator for power on, low battery, and battery charge, and re-charging is done through the convenient micro-USB port.   Frequently Asked Questions   Why would I need a headphone amplifier? Headphone amplifiers can be great for anyone looking to get the most out of their favorite pair of headphones and improve their overall listening experience. Cell phones, tablets and other listening devices these days may sound ok for general use, but could be lacking in overall response. A good headphone amplifier can improve the frequency response, clarity and add a much needed volume boost for high impedance headphones. They can also help in loud environments where it may be necessary to turn the headphone volume up more than normal like playing drums to a backing track. In addition, the Bass Traveler also features a second headphone output that can be used to split the signal to a second pair of headphones for a second listener. What is impedance? To avoid getting too technical, impedance in this case is the resistance your he... [Read More]

  • UPC: 694318018019
  • ASIN: B00X67G77O
  • Brand: M-Audio
  • Size: m/as
  • Manufacturer: inMusic Brands Inc.

J&M Audio 4 Speaker and 400 Watt Amplifier Kit for 2006-2013 Harley-Davidson Ultra Classic Limited models - JHAK-HCU06-4004SP

J&M Audio 4 Speaker and 400 Watt Amplifier Kit for 2006-2013 Harley-Davidson Ultra Classic Limited models - JHAK-HCU06-4004SP

You are buying a new Speaker and Amp kit that includes 2 of J&M's Performance series 7.25" Front Speakers, 2 of J&M's 5.25" Performance Rear Speakers and a J&M 400 Watt 4 Channel Amp that will fit 2006-2013 Harley-Davidson Ultra Classic models with 4 speakers. The Performance Speakers are the largest diameter speakers that can be installed into the Harley-Davidson BatWing style fairing and include Speaker Grills with Mid-Range and Tweeter speakers. The speakers are designed at 2 ohms impedance with an impressive 140 watts maximum input. They provide a solid gain in the mid/high frequency range and base response when powered by an amp. Included are the speakers, grilles, mounting adapters, hardware and complete instructions. The 400 watt, 4 Channel Amp is a full range class D amplifier and puts out 100 Watts RMS per channel (400w total) driven continuous into a 2 ohm load @ 14.4vdc. Custom made plug-n-play wiring harnesses are included with this amplifier kit with top quality heavy gauge power/ground wires for the fused battery connection, along with all necessary mounting brackets, hardware & complete installation/operation instructions.

  • UPC: 795533615899
  • ASIN: B07DWGGN4J
  • Brand: JM Audio
  • Manufacturer: J&M Audio

J&M Audio 400 Watt 4 Channel Amplifier Kit for 2014 and Newer Harley-Davidson Street Glide models - JMAA-4000HC14-SG

J&M Audio 400 Watt 4 Channel Amplifier Kit for 2014 and Newer Harley-Davidson Street Glide models - JMAA-4000HC14-SG

You are buying a new J&M Performance Series 400 Watt 4 Channel fairing speaker amplifier kit has been design specifically for use in the 2014 and Newer Harley-Davidson Street Glide models using the Harley-Davidson Boom Box 4.3 or 6.5 GT Radios and 4 speakers. This is a full range class D amplifier with an output of 100 Watts RMS per channel (x4) driven continuous into a 2 ohm load @ 14.4vdc. The amplifier mounts to a custom made, stainless steel 2-piece bracket system that provides solid and secure mounting inside the fairing, and also shields amplifier heat from being transferred to the radio. The plug-n-play wiring harness included with this kit takes the 2-channels of audio signal available from the Street Glide radio and provides 4 separate channels of amplification at 100 watts for each speaker. Included in this kit are: Custom made plug-n-play wiring harnesses, top quality heavy gauge fused power/ground wires, all necessary mounting hardware and complete installation/operation instructions. The amplifier measures 7 1/4" x 4 3/4" x 1 3/4".

  • UPC: 795533615936
  • ASIN: B07DWCWRBK
  • Brand: JM Audio
  • Manufacturer: J&M Audio

J&M Audio Isolated RCA Input Amplifier Harness Harley-Davidson Touring models with Radios 2006-2013 - JAMP-RCA-ADHS

J&M Audio Isolated RCA Input Amplifier Harness Harley-Davidson Touring models with Radios 2006-2013 - JAMP-RCA-ADHS

You are buying a J&M Audio Isolated RCA Input Amplifier Adapter Harness which fits 2006-2013 Electra Glides, Ultra"s, Road Glides, Street Glides and Tri-Glide Trikes. This is a plug-and-play, isolated, RCA input adapter harness to connect the 2006-2013 Harley HK radio to the RCA inputs of most high-powered 12v automotive type audio amplifiers. Use this harness to bring the amplifier input gain controls into a useful range of adjustment, when setting up and tuning a high-performance Bagger audio system.This custom built J&M adapter harness will also remove the "speaker fault" condition when running the Harley HK radio diagnostics and eliminate any possible DC current that might otherwise travel between the HK radio and the amplifier. Amplifier gain control adjustment guidelines also included.At Hill Country Customs, we carry the complete line of J&M Audio products for Harley-Davidson models. We don't just sell J&M products, we use them on our show bikes and many of our customer bikes. We know through experience that J&M products are #1 for the customer who wants the loudest and best quality sound for their Harley-Davidson.

  • UPC: 642529121707
  • ASIN: B00FRWRX6A
  • Brand: JM Audio
  • Manufacturer: J&M Audio

J&M Rokker 2 Speaker and 350 Watt Amplifier Kit for 2006-2013 Harley-Davidson Electra Glide Street Glide models - HC-350XXRK-ESG

J&M Rokker 2 Speaker and 350 Watt Amplifier Kit for 2006-2013 Harley-Davidson Electra Glide Street Glide models - HC-350XXRK-ESG

You are buying a new pair of J&M Audio Rokker XXR series 7.25" speakers with a J&M Audio 350 Watt 2 Channel Rokker Amp that will fit 2006-2013 Harley-Davidson Electra Glide, Classic, Street Glide and Trike models. The Rokker speakers are the largest diameter speakers that can be installed into the Harley-Davidson BatWing style fairing, with the sound comparable to a 6"x9" speaker. The speaker grilles have mid-range and tweeter speakers included that plug right into the Rokker main speaker. They are designed at 2 ohms impedance with an impressive 217 watts maximum input. They provide the Ultimate sound in the mid and high frequency range and base response when powered by a Rokker Amp. Included are the speakers, Grilles, mounting adapters, fairing acoustic foam pads, hardware and complete instructions. The 350 watt, 2 Channel Rokker Amp is a full range class D amplifier and puts out a maximum of 175 Watts RMS per channel driven continuous into a 2 ohm load @ 14.4vdc. Custom made plug and play wiring harnesses are included with this amplifier kit with top quality heavy gauge power and ground wires for the fused battery connection, along with all necessary mounting brackets, hardware & complete installation and operation instructions. This custom kit is a total plug and play solution for your Harley. J&M Audio is available to provide any Tech or Warranty support that you might ever need.

  • UPC: 795533615516
  • ASIN: B07F22LJP3
  • Brand: JM Audio
  • Manufacturer: J&M Audio

J&M Audio 400 Watt 4 Channel Universal Amplifier Kit for 1998-2013 Harley-Davidson models - JMAA-4000H-UNV

J&M Audio 400 Watt 4 Channel Universal Amplifier Kit for 1998-2013 Harley-Davidson models - JMAA-4000H-UNV

You are buying a new Universal Mount J&M Performance Series 400 Watt 4 Channel fairing speaker amplifier kit has been design specifically for use in the 1998-2013 Harley-Davidson models using the Harley-Davidson stock Radio. This is a full range class D amplifier with an output of 100 Watts RMS per channel (x4) driven continuous into a 2 ohm load @ 14.4vdc. The amplifier mounts using velcro or your own fabricated bracket. The plug-n-play wiring harness included with this kit provides 4 separate channels of amplification at 100 watts for each speaker. Included in this kit are: Custom made wiring harnesses, top quality heavy gauge fused power/ground wires, and complete installation/operation instructions. The amplifier measures 7 1/4" x 4 3/4" x 1 3/4".

  • UPC: 795533615981
  • ASIN: B07DWL3PV7
  • Brand: JM Audio
  • Manufacturer: J&M Audio

J&M Audio 400 Watt 4 Channel Amplifier Kit for 2014 and Newer Harley-Davidson Ultra Classic Limited models - JMAA-4000HC14-UL

J&M Audio 400 Watt 4 Channel Amplifier Kit for 2014 and Newer Harley-Davidson Ultra Classic Limited models - JMAA-4000HC14-UL

You are buying a new J&M Performance Series 400 Watt 4 Channel fairing speaker amplifier kit has been design specifically for use in the 2014 and Newer Harley-Davidson Ultra Classic, Ultra Limited and Tri-Glide Trike models using the Harley-Davidson Boom Box 4.3 or 6.5 GT Radios. This is a full range class D amplifier with an output of 100 Watts RMS per channel (x4) driven continuous into a 2 ohm load @ 14.4vdc. The amplifier mounts to a custom made, stainless steel 2-piece bracket system that provides solid and secure mounting inside the fairing, and also shields amplifier heat from being transferred to the radio. The plug-n-play wiring harness included with this kit provides 4 separate channels of amplification at 100 watts for each speaker. Included in this kit are: Custom made plug-n-play wiring harnesses, top quality heavy gauge fused power/ground wires, all necessary mounting hardware and complete installation/operation instructions. The amplifier measures 7 1/4" x 4 3/4" x 1 3/4".

  • UPC: 795533615943
  • ASIN: B07DWHLBBB
  • Brand: JM Audio
  • Manufacturer: J&M Audio

J&M Audio 4 Speaker and 400 Watt Amplifier Kit for 2011-2013 Harley-Davidson Road Glide Ultra models - JHAK-HRU11-4004SP

J&M Audio 4 Speaker and 400 Watt Amplifier Kit for 2011-2013 Harley-Davidson Road Glide Ultra models - JHAK-HRU11-4004SP

You are buying a new Speaker and Amp kit that includes 2 of J&M's Performance series 7.25" Front Speakers, 2 of J&M's 5.25" Performance Rear Speakers and a J&M 400 Watt 4 Channel Amp that will fit 2011-2013 Harley-Davidson Road Glide Ultra models with 4 speakers. The Performance Speakers are the largest diameter speakers that can be installed into the Road Glide fairing and include Speaker Grills with Mid-Range and Tweeter speakers. These speakers are designed at 2 ohms impedance with an impressive 140 watts maximum input. They provide a solid gain in the mid/high frequency range and base response when powered by an amp. Included are the speakers, grilles, mounting adapters, hardware and complete instructions. The 400 watt, 4 Channel Amp is a full range class D amplifier and puts out 100 Watts RMS per channel (400w total) driven continuous into a 2 ohm load @ 14.4vdc. Custom made plug-n-play wiring harnesses are included with this amplifier kit with top quality heavy gauge power/ground wires for the fused battery connection, along with all necessary mounting brackets, hardware & complete installation/operation instructions.

  • UPC: 795533615905
  • ASIN: B07DWF87LF
  • Brand: JM Audio
  • Manufacturer: J&M Audio

J&M Audio 4 Speaker and 400 Watt Amplifier Kit for 2016 and Newer Harley-Davidson Road Glide Ultra models - PSXK-400SP4-16RU

J&M Audio 4 Speaker and 400 Watt Amplifier Kit for 2016 and Newer Harley-Davidson Road Glide Ultra models - PSXK-400SP4-16RU

You are buying a new speaker and amp kit that includes a pair of J&M's Rokker 6.71" front speakers, a pair of Rokker 6.71" rear passenger speakers and a J&M 400 Watt 4 Channel Performance Amp that will fit 2016 and Newer Harley-Davidson Road Glide Ultra models. The Rokker Speakers are the largest diameter speakers that can be installed into the Harley-Davidson fairing or rear speaker pods and include Speaker Grills with high performance tweeter speakers. The speakers are designed at 2 ohms impedance with an impressive 300 watts maximum input. They provide a solid gain in the high, mid and base frequency range when powered by an amp. Included are the speakers, grilles, hardware and complete instructions. The 400 watt, 4 Channel Amp is a full range class D amplifier and puts out 100 Watts RMS per channel driven continuous into a 2 ohm load at 14.4vdc. Custom made plug and play wiring harnesses are included with this amplifier kit with top quality heavy gauge power and ground wires for the fused battery connection, along with all necessary mounting brackets, hardware & complete installation and operation instructions. Amplifier itself measures 7.25" X 4.75" X 1.75". No Radio software flashing is needed with this kit.

  • UPC: 795533616001
  • ASIN: B07DWDD1YF
  • Brand: JM Audio
  • Manufacturer: J&M Audio

J&M Audio 400 Watt 4 Channel Amplifier Kit for 2011-2013 Harley-Davidson Road Glide Ultra models - JMAA-4000HR11-UL

J&M Audio 400 Watt 4 Channel Amplifier Kit for 2011-2013 Harley-Davidson Road Glide Ultra models - JMAA-4000HR11-UL

You are buying a new J&M Performance Series 400 Watt 4 Channel fairing speaker amplifier kit has been design specifically for use in the 2011-2013 Harley-Davidson Road Glide Ultra models using the Harley-Davidson Boom Box 4.3 or 6.5 GT Radios and 4 speakers. This is a full range class D amplifier with an output of 100 Watts RMS per channel (x4) driven continuous into a 2 ohm load @ 14.4vdc. The amplifier mounts to a custom made, stainless steel bracket system that provides solid and secure mounting inside the fairing, and also shields amplifier heat from being transferred to the radio. The plug-n-play wiring harness included with this kit takes the 2-channels of audio signal available from the Road Glide radio and provides 4 separate channels of amplification at 100 watts for each speaker. Included in this kit are: Custom made plug-n-play wiring harnesses, top quality heavy gauge fused power/ground wires, all necessary mounting hardware and complete installation/operation instructions. The amplifier measures 7 1/4" x 4 3/4" x 1 3/4".

  • UPC: 795533615967
  • ASIN: B07FGFQ13W
  • Brand: JM Audio
  • Manufacturer: J&M Audio