Makita HM1307CB 35-Pound Demolition Hammer

Makita HM1307CB 35-Pound Demolition Hammer

Demolition Breaker Hammer, Amps @ 120V 14 A, Impact Energy (Ft.-Lb.) 25.7 lb., Blows per Minute 730-1450, Drive System 1 1/8 Hex, Features Soft Start Variable Speed, Handle Type D, Tool Length (In.) 32-1/2 In., Tool Weight (Lb.) 38.2 lb., Includes Tool Case, Bit

  • UPC: 088381604673
  • ASIN: B004HEY0CO
  • Brand: Makita
  • Manufacturer: Makita

Makita 194683-7 Grease Vessel, Bit

Makita 194683-7 Grease Vessel, Bit

Makita Hammer Bit Grease is designed to keep the shank of the bit lubricated for more efficient results. The advanced composition of the grease means the user needs only to lightly grease the shank. The pump top design makes it easy for the user to apply the exact amount they need to the exact spot without making a mess.

  • UPC: 088381116619
  • ASIN: B005GNCGG2
  • Brand: Makita
  • Manufacturer: Makita

Makita HM0870C 11-Pound Demolition Hammer SDS-Max

Makita HM0870C 11-Pound Demolition Hammer SDS-Max

INCLUDES: Side Handle Bit Grease Cleaning Cloth Tool CaseFEATURES: Hard hitting (11.4J) with less weight (11.1 lbs.); ideal for horizontal work Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs Soft start suppresses start-up reaction for more control and better accuracy Variable speed control dial enables user to match the speed to the application for greater versatility L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced L.E.D. power light indicates switch failure or cord damage Extended life brushes are longer for more work between service intervals and less downtime 12 bit angle settings allow the bit to be set at different positions for operating convenience Automatic brush cut-off protects commutator from damage for longer tool life Rubberized ergonomic soft grip provides more comfort and control Accepts SDS-MAX bitsSPECIFICATIONS: Blows per Minute 1,100-2,650 BPM Impact Energy 11.4 Joules 8.4 ft.lbs. AMPS (120V) 10.0 Vibration (m/s2)11.0 Bit Type Accepts SDS-MAX Bits Overall Length 17-7/8"

  • UPC: 088381605328
  • ASIN: B003ANBKXA
  • Brand: Makita
  • Manufacturer: Makita

Makita HM1211B 20 lb. Demolition Hammer, Accepts 3/4" Hex Bits

Makita HM1211B 20 lb. Demolition Hammer, Accepts 3/4" Hex Bits

  • UPC: 088381012287
  • ASIN: B0001AGNLE
  • Brand: Makita
  • Manufacturer: Makita

Makita 751622-A 5-1/2" x 20" Clay Spade, 1-1/8" Hex

Makita 751622-A 5-1/2" x 20" Clay Spade, 1-1/8" Hex

The Makita 1-1/8 in., 5-1/2 in. Clay Spade is manufactured using state-of-the-art technology, CNC machined and forged from industrial-grade alloy material for increased durability. Shot peened for added strength and increased surface hardness, the 751622-A is ideal for removing hard dirt, clay and loose concrete from the ground. The 1-1/8 in., 5-1/2 in. Clay Spade is clear-coated to prevent corrosion for longer bit life.

  • UPC: 088381935852
  • ASIN: B0007ZQGGK
  • Brand: Makita
  • Manufacturer: Makita

Makita HM1214CX 27-Pound AVT Demolition Hammer

Makita HM1214CX 27-Pound AVT Demolition Hammer

Dig, chip, and break concrete more efficiently--and with less unwanted vibration--using the HM1214C demolition hammer from Makita. This tool features the company's exclusive Anti-Vibration Technology (AVT) to limit vibrations and improve performance. A powerful 14-amp engine produces 950 to 1,900 blows per minute (BPM), while an automatic brush cutoff system helps increase the tool's life. An electronic dial lets you adjust the speed to fit your project. This model includes a 1 inch SDS-Plus Rotary Hammer.

  • UPC: 088381624008
  • ASIN: B00B1YVCCE
  • Brand: Makita
  • Manufacturer: Makita

Makita HM1203C 20-Pound SDS MAX Demolition Hammer

Makita HM1203C 20-Pound SDS MAX Demolition Hammer

Demolition Breaker Hammer, Amps @ 120V 14, Impact Energy (Ft.-Lb.) 18.8, Blows per Minute 950-1900, Drive System SDS Max, Features Soft Start Variable Speed, 12 Position Bit Holder, Ergonomic Handle, Handle Type D Handle, Tool Length (In.) 22-3/4 In., Tool Weight (Lb.) 20.3 lb., Includes Tool Case, Bit

  • UPC: 088381601986
  • ASIN: B003A6L79O
  • Brand: Makita
  • Manufacturer: Makita

Demolition Hammer, 3/4 In Hex, 11 Lb.

Demolition Hammer, 3/4 In Hex, 11 Lb.

Demolition Breaker Hammer, Amps @ 120V 8.3 A, Impact Energy (Ft.-Lb.) 5.6 lb., Blows per Minute 2900, Drive System 3/4 Hex, Features Anti Vibration Spring, Handle Type D, Tool Length (In.) 16-5/8 In., Tool Weight (Lb.) 12.8 lb., Includes Tool Case

  • UPC: 088381011860
  • ASIN: B00004YOL1
  • Brand: Makita
  • Manufacturer: Makita

Makita D-21353 20-1/2" Bull Point, 1-1/8" Hex

Makita D-21353 20-1/2" Bull Point, 1-1/8" Hex

The Makita 1-1/8 Hex Bull point is used for demolition applications. The bull point is 20-1/2" in length. For use with Makita and other competitive brand breaker and demolition hammers.

  • UPC: 088381200431
  • ASIN: B002AJ86B4
  • Brand: Makita
  • Manufacturer: Makita

Makita HM1317CB 42-Pound Breaker Hammer with Anti-Vibration Technology,Blue

Makita HM1317CB 42-Pound Breaker Hammer with Anti-Vibration Technology,Blue

Breaker Hammer, Amps @ 120V 14.0, Impact Energy (Ft.-Lb.) 25.7, Blows per Minute 730-1450, Drive System 1 1/8 In. Hex, Features AVT Anti-vibration Technology, Handle Type Ergonomic D Handle with Multi Position Side Handle, Tool Length (In.) 32-1/2, Tool Weight (Lb.) 41.9, Includes Rolling Tool Case

  • UPC: 088381604659
  • ASIN: B003S3SOU4
  • Brand: Makita
  • Manufacturer: Makita