Monoprice 611815 15Watt, 1 x 12 Guitar Combo Tube Amplifier with Celestion Speaker & Spring Reverb

Monoprice 611815 15Watt, 1 x 12 Guitar Combo Tube Amplifier with Celestion Speaker & Spring Reverb

Get superior guitar tone and flexibility using this 15-Watt, 1x12 Guitar Combo Tube Amplifier with Celestion Speaker & Spring Reverb from Monoprice! As the title indicates, this guitar amplifier features a 15-watt tube power amplifier and a Celestion brand speaker. It uses three ECC83/12AX7 preamplification tubes and two EL84 power tubes for the amplifier section, plus a Celestion Red Truvox 1215 speaker. The EL84 tube is the tube that powered the Mullard amplifiers favored by the British Invasion bands of the 1960s. It can produce a full output from a relatively small signal and is therefore easily overdriven to produce that distinctive chiming, treble-heavy sound, especially when compared to the 6L6 tubes more commonly used in 1960s era American guitar amps. The amplifier handles frequencies between 80Hz and 10kHz, with hum and noise -75dB below the rated power and 0.5% total harmonic distortion. It includes a Low input and a High input, with the former attenuating the signal by approximately 50% and the latter being easier to overdrive. The cabinet is ported in the rear and features a leather handle, cloth speaker grill, and a cream-colored, textured, synthetic leather exterior with chrome corner guards. The amp features a genuine spring reverb with the ability to enable it remotely using a foot switch. It supports FX send and receive, so you can either connect it to an effects processor or use the send/receive connections as line out and line in connections. Two inputs allow you to select between the full power mode and a 1 watt limited amplification mode for recording or late night practice sessions.

  • UPC: 757901820311
  • ASIN: B016JDJE9E
  • Brand: Monoprice
  • Manufacturer: Monoprice Inc.

Monoprice Blackbird 4K 1x2 HDMI Amplifier Splitter

Monoprice Blackbird 4K 1x2 HDMI Amplifier Splitter

This Blackbird 4K HDMI splitter distributes a single HDMI source to two HDMI displays. Features: 1 HDMI input splits to 2 HDMI sink devices HDCP 1.4 protocol compliant 3D video support including frame packing for all 3D formats up to a 297MHz TMDS clock Support display resolutions up to 4K@30Hz, 1080p@120Hz, and 3D-1080p@60Hz Supports 48-bit Deep Color Supports digital audio formats, including DTS-HD, Dolby TrueHD, 7.1-channel LPCM, DTS, Dolby AC3, and DSD Support Files: User's Manual (Apr 22, 2014) Blackbird is a trademark of Monoprice Inc. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. HDCP is a trademark of Digital Content Protection LLC. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. Dolby AC3 and Dolby TrueHD are trademarks of Dolby Laboratories. DTS, the Symbol, and DTS + the Symbol together are registered trademarks and DTS-HD is a trademark of DTS, Inc.

  • UPC: 889028034798
  • ASIN: B01GCGKAAK
  • Brand: Monoprice
  • Manufacturer: Monoprice

Monolith 133304 Liquid Spark Headphone Amplifier-by Alex Cavalli with RCA Input, Single 1/4 Output 1.3Watt@50R, 108dB

Monolith 133304 Liquid Spark Headphone Amplifier-by Alex Cavalli with RCA Input, Single 1/4 Output 1.3Watt@50R, 108dB

The Monolith liquid spark is a compact headphone amplifier developed by Alex Cavalli for Monoprice. It provides everything people have come to expect from a Cavalli design. It uses dual 18 V filtered power supply Rails to produce wide voltage swings for additional headroom. The spark offers plenty of power at 1300MW RMS into 50ohms (per channel), with very low distortion, and switchable gain.

  • UPC: 889028084601
  • ASIN: B07JW7NSXT
  • Brand: Monolith
  • Manufacturer: Monoprice

Monoprice 1x4 HDMI Amplifier Splitter over CAT5e/CAT6 Complete Solution Kit - Extend up to 164ft-1 splitter, 4 receiver

Monoprice 1x4 HDMI Amplifier Splitter over CAT5e/CAT6 Complete Solution Kit - Extend up to 164ft-1 splitter, 4 receiver

Are you running a trade show and need an easy way to setup multiple HD displays showcasing your product? Do you have a sports bar or recreation center with HDTVs set up everywhere for your customers to watch the big game? Or do you just want to have a TV in every room of your house, so you can do your household chores without missing a moment of your favorite TV show? Enter the Monoprice 1x4 HDMI Amplifier Splitter! This is the perfect solution for when you need to distribute a video signal to multiple displays. It takes a single HDMI input and splits it into four Ethernet signals, which are then transmitted over a single Cat5e/6 cable each for to a distance of up to 50 meters (164 feet). The receiver unit at the end then converts the signal back to HDMI for use by the display. This kit comes with everything you need, except the actual cables themselves. You get the 1x4 Amplifier Splitter, four Receiver units, and five AC adapters, one for the amplifier and the other four for the receivers. You also get mounting brackets and screws for each receiver, so you can fix them to a wall or other surface. Features: Easy to install - just plug it in and start using it right away! Extends High Speed 1080p HDMI signals up to 50 meters (164 feet), Uses just a single Cat5e/6 cable for each display, Supports 165 MHz/1.65 Gbps per channel (4.95 Gbps all channel) bandwidth, Supports 8-bit per channel (24-bit all channel) deep color, Supports uncompressed audio such as LPCM, Gold-plated HDMI connectors, CE, FCC, UL (Canadian and US), and RoHS compliant.

  • UPC: 844660081593
  • ASIN: B00845RYP2
  • Brand: Monoprice
  • Manufacturer: Monoprice Inc.

Monoprice 111567 Desktop Headphone Amplifier

Monoprice 111567 Desktop Headphone Amplifier

Get superior audio reproduction from your computer and audiophile headphones using this Desktop Headphone Amplifier from Monoprice! This headphone amplifier features a USB input and a professional level Texas Instruments Digital to Analog Converter (DAC), effectively replacing your sound card without requiring you to open your PC and installing a new card. The high-current output allows it to drive headphones with a wide range of impedances, from 16 ohms to 600 ohms. The RCA line outputs allow you to send the output to a stereo amplifier or powered speakers for those times when you don't want to use headphones. A set of RCA line inputs allows you to connect an external audio source, such as a CD player, so you can enjoy the advantages of the high-current headphone output with other audio sources.

  • UPC: 757901815782
  • ASIN: B00KVVX2QW
  • Brand: Monoprice
  • Size: unknown
  • Manufacturer: Monoprice Inc.

Monoprice USB-C Dual-Monitor Docking For USB-C Laptops, MST and Power Delivery up to 100W with USB-C Cable

Monoprice USB-C Dual-Monitor Docking For USB-C Laptops, MST and Power Delivery up to 100W with USB-C Cable

The Monoprice USB-C Dual Monitor Docking Station offers an integrated solution for power, data, Ethernet, audio, and video for USB-C equipped PCs and laptops. It features HDMI®, DisplayPort, VGA video outputs, two of which can be used at the same time when connected to a Windows PC or laptop. It supports Multi-Stream Transport (MST) and up to 100 watts of Power Delivery (PD) for charging USB-C equipped laptops, smartphones, and tablets. Four USB 3.0 Type-A ports allow you to keep all of your devices charged and sync'd, while the Gigabit Ethernet port keeps you connected. The two 3.5mm analog audio outputs allow you to connect headsets, powered speakers, or an external amplifier.Expand Your View: This adapter is designed to allow you to connect an HDMI®, DisplayPort, or VGA display to a USB-C or Thunderbolt™ 3 equipped Mac® or Windows® PC or laptop. It supports HDMI and DisplayPort resolutions up to 4K@30Hz and VGA resolutions up to [email protected] Cable to Connect Them All: Connect all of your devices and keep everything you do organized through one powerful cable. The USB-C Dual Monitor Docking station connects up to ten devices to a single USB-C port on your computer.USB-C Power Delivery: The USB-C charging port allows you to connect a USB-C charger, so you can charge your laptop's battery, rather than draining it, while using this USB-C dock to deliver up to 100 watts of charging power.

  • UPC: 889028069417
  • ASIN: B079F4QR7T
  • Brand: Monoprice
  • Manufacturer: Monoprice

Monolith Multi-Channel Power Amplifier - Black With 7x200 Watt Per Channel, XLR Inputs For Home Theater & Studio

Monolith Multi-Channel Power Amplifier - Black With 7x200 Watt Per Channel, XLR Inputs For Home Theater & Studio

The Monolith 7 is a state-of-the-art, high-performance, audiophile-grade multichannel home theater amplifier. Rated at a full 200 watts per channel into 8 ohms and 300 watts per channel into 4 ohms, the Monolith 7 is capable of driving the most demanding home theater systems and reproducing the most dynamic soundtracks, while also articulating all the subtle sonic details found in music. Supercharge your existing receiver or create the foundation of a no compromise home theater system with the Monolith 7.

  • UPC: 889028026465
  • ASIN: B0197VRC1W
  • Brand: Monoprice
  • Size: 7 Ch.
  • Manufacturer: Monoprice Inc.

Monoprice 300-Watt (150w RMS x2) Studio Audio Amplifier (605030)

Monoprice 300-Watt (150w RMS x2) Studio Audio Amplifier (605030)

Add 300 watts of clean and stable power to your studio rack using this 300-Watt Studio Audio Amplifier from Monoprice!This rack-mountable switching Class D amplifier packs 300 watts of power into a compact form factor, which takes up only 1U of rack space. It can be used as a stereo amplifier or can be bridged for mono mode.In stereo mode it produces 150 watts per channel RMS (300 watts per channel peak) into a 4-ohm load or 100 watts per channel RMS (200 watts per channel peak) into an 8-ohm load. When driving a 2-ohm load, it can produce 250 watts per channel RMS (500 watts per channel peak). When bridged for mono mode, the amplifier produces 500 watts RMS (1000 watts peak) into a 4-ohm load and 360 watts RMS (720 watts peak) into an 8-ohm load. Additionally, it is stable when using reactive or mismatched loads, so for example, you can connect a 2-ohm speaker to one channel and an 8-ohm speaker to the other without any problems.It features an extremely flat 20Hz ~ 20kHz (+0, -1dB) frequency response with less than 0.05% THD+N and more than 96dB signal-to-noise ratio. Built-in protection circuitry includes full short circuit, open circuit, thermal, ultrasonic, and RF protection. It also features power on/off muting function to prevent popping in the speakers when power is turned on or off. There is also a selectable limiter, which serves as a brick wall on volume to prevent high volume levels from driving the amplifier into clipping, which can cause speaker damage.Features: • Class D amplifier• High current switching power for high power output, low noise, and low distortion• Extremely flat 20Hz ~ 20kHz (+0, -1dB) frequency response with less than 0.05% THD+N• Balanced 1/4" TRS and XLR inputs• Unbalanced 1/4" TS and NL4 speaker twist speaker outputs• Built-in optional limiter helps prevent clipping• Short circuit, open circuit, thermal, ultrasonic, and RF protection• Stable with reactive and mismatched loads• Power on/off muting function• Separa... [Read More]

  • UPC: 889028001639
  • ASIN: B011JNVIYI
  • Brand: Monoprice
  • Size: 300-Watt
  • Manufacturer: Monoprice

Monoprice Unity 100-Watt Bridgeable Power Amp

Monoprice Unity 100-Watt Bridgeable Power Amp

Unity 100-watt bridgeable power ampmultiroom audio systems are in high demand These days. Homeowners and businesses have their own idea of what they want. Sometimes the all-in-one does not meet the need of the client. this 2-channel class D power amplifier features a stereo speaker output, with support for 4-ohm and 8-ohm speakers. It can deliver 50 watts per channel into 8-ohm loads or 65 watts per channel into 4-ohm loads. Additionally, the output can be bridged to provide 120 watts to a single 8-ohm speaker. It includes a buffered loop line output of the original signal for driving another power amplifier in Distributed whole house audio systems. The amp can be configured for always on, signal detection, or triggered power on status. It also includes a 12-volt trigger output for controlling other devices. • Class-D amplifier providing 50 watts/channel (RMS) into 8 Ohm loads or 65 watts/channel into 4-ohm loads• bridgeable output provides 120 watts into a single 8-ohm load• 4-pole detachable speaker screw connector (Phoenix connector) with support for up to 12 AWG speaker wire bull; 12-volt trigger input for power-on/off• 12-volt trigger output for controlling other devices• buffered loop output of original signal for connecting additional amplifiers• rear panel volume gain adjustment• built-in thermal and short circuit protection circuits• includes rack-mount ears for mounting a single amp or two Amps side-by-side

  • UPC: 889028045336
  • ASIN: B01MYBWJCN
  • Brand: Monoprice
  • Manufacturer: Monoprice Inc.

Monoprice 615220 4-Channel Headphone Amplifier

Monoprice 615220 4-Channel Headphone Amplifier

Expand your headphone monitoring capabilities with the addition of this 4-channel Headphone Amplifier from Monoprice! This amplifier features four 1/4; (6.35mm) amplified headphone outputs, each with its own independent volume control. It features an extremely clean amplifier circuit, which produces a signal-to-noise ratio greater than 98dB. It accepts line-level audio input over the stereo RCA jacks on the back or headphone level through the optional 1/4; TRS jack. A switch on the back allows you to choose a mono or stereo output. The amplifier is powered by the included 12 VDC/500mA AC adapter. Specifications: Inputs: 2x RCA and 1x 1/4; (6.35mm) TRS Input Impedance: 100 K-ohms (unbalanced) Outputs: 4x 1/4; (6.35mm) TRS Output Impedance: minimum 10 ohms per channel Maximum Output Level: +22dB Maximum Gain: 20dB per channel Signal to Noise Ratio: > 98dB

  • UPC: 757901803406
  • ASIN: B00H3TE5P2
  • Brand: Monoprice
  • Manufacturer: Monoprice Inc.