Arkon 90mm Adhesive Mounting Disk for Car Dashboards Garmin TomTom GPS Dashboard Disc
Arkon 90mm Adhesive Mounting Disk for Car Dashboards Garmin TomTom GPS Dashboard Disc
The AP020 90mm adhesive mounting disk allows you to mount an Arkon or third-party 80mm windshield suction mounting pedestal to your car’s dashboard, including mounting pedestals for Garmin and TomTom GPS devices. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the adhesive to cure before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For an 80mm disk to use with 70mm suction mounts, see Arkon Model AP013. For a 70mm disk to use with 60mm suction mounts, see Arkon Model AP036.
- UPC: 047407500207
- ASIN: B001DAT0XE
- Brand: ARKON
- Size: 90mm disk for 80mm suctions
- Manufacturer: Arkon
Dashboard Pad Mounting Disk for Suction Cup Phone Mount & for Tom Tom Garmin GPS Suction Mount Sat Nav Dash Cam Holder Stick On Universal Dash Mount Pad w/3M Adhesive 70mm Diameter 3 Pcs
Dashboard Pad Mounting Disk for Suction Cup Phone Mount & for Tom Tom Garmin GPS Suction Mount Sat Nav Dash Cam Holder Stick On Universal Dash Mount Pad w/3M Adhesive 70mm Diameter 3 Pcs
Universal Compatibility This 3M Adhesive Dashboard Pad is compatible with all APPS2Car Dashboard Suction Cup Mounts for smartphones, and Garmin, TomTom GPS mounting pedestals. Dashboard Pad Mounting Instructions 1. Choose the location you would like to apply the disk and clean the dashboard surface area thoroughly to remove any dust or debris. Allow the area to dry completely before applying the mounting disk. 2. Remove the paper cover from the dashboard pad. 3. Stick the pad on the cleaned dash surface, and rub firmly over surface to ensure a strong adhesive grip. And remove the protective film. Note: Let the adhesive set for 3 hours before installing suction cup mount. According to customer reviews, it is better to let it set for 24-48 hrs before attaching suction cup mount onto it. 4. Place the suction cup of the pedestal (sold separately) firmly down on the center of the mounting pad and lower the securing lever. Note: * Do not place the mount in or near an air bag deployment zone or where it will obstruct view of the road or hinder vehicle operation. Please mount it on a flat surface. ** Each pad is one-time use only. Once removed, it can not be reapplied. Removal Tip To remove the Adhesive Dashboard Pad, pull up on the ring tab slowly. If you feel a lot of resistance, slide dental floss or a plastic slice under the pad to help loosen the seal. Slide in and lift it up slowly little by little, do not rush. Package 3 Pcs Dashboard Pad
- ASIN: B072VGDDC8
- Brand: APPS2Car
- Size: 3 Pack
- Manufacturer: Wiiki-tech international
ARKON APVHB20 90mm Extra Strength Adhesive Mounting Disk for Car Dashboards
ARKON APVHB20 90mm Extra Strength Adhesive Mounting Disk for Car Dashboards
The APVHB20 90mm adhesive mounting disk features an extra-strength 3M VHB adhesive and allows you to securely mount an Arkon or third-party 80mm windshield suction mounting pedestal to your car’s dashboard. Applicable Arkon mounting pedestal models include CM017-KST-2SH, CM078WD-SBH, RM080AMPS, RM0792TWD, and RM0802T. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the extra-strength adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M VHB dash mount disc, then place and press down on a previously cleaned surface. (Allow 24 hours for the adhesive to cure before securing the base of the mounting pedestal to the center of the disk for best results.) WARNING: Use caution and discretion when adhering APVHB20 to your car dashboard or other flat surface. This disk uses 3M VHB adhesive, which is designed to be a PERMANENT solution. Use of this disk may result in permanent adherence to the selected surface. Professional strength solvents or tools may be helpful in removing the adhesive. Arkon is not responsible for any damage caused to your vehicle or other surface due to the installation of this mounting disk. Adhesive disks with a semi-permanent bonding strength (Model AP036 -70mm, Model AP013 -80mm, Model AP020 -90mm) are available from Arkon. For an extra-strength 80mm disk to use with 70mm suction mounts, see Arkon Model APVHB13.
- UPC: 047407512200
- ASIN: B00YPNVMUU
- Brand: ARKON
- Manufacturer: Arkon Resources Inc.
Dashboard Mount Disc 70mm Diameter 3M Adhseive Dash Mounting Pad for Tom Tom Garmin Magellan GPS Suction Cup Mount Also for Dash Phone Holder - 2 Pack
Dashboard Mount Disc 70mm Diameter 3M Adhseive Dash Mounting Pad for Tom Tom Garmin Magellan GPS Suction Cup Mount Also for Dash Phone Holder - 2 Pack
Universal Compatibility About 70mm diameter fits for almost all Garmin TomTom Magellean GPS mounting pedestals and dashboard suction phone mount. Dashboard Mounting Instructions 1. Choose a suitable location for disk (and pedestal) installation. Do not place mount in or near an air bag deployment zone or where it will obstruct view of the road or hinder vehicle operation. 2. Clean the dashboard surface area thoroughly with alcohol pad to ensure dashboard is clean and free of any dashboard conditioners or other treatments. 3. Remove the paper backing of the disk and place on the cleaned surface. Press the top of the disk down firmly to allow the adhesive to stick to the surface. Allow 24 hours for the adhesive to cure to the surface before applying any pressure. 4. Place the suction cup of the pedestal (sold separately) firmly down on the center of the mounting disk and lower the securing lever. Removal Instructions 1. Prepare the surface around the disk by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the adhesive area for about a minute. 2. Take a long piece of dental floss in each hand and slowly work back and forth at the base of the adhesive disk. Gently use the dental floss to cut the adhesive from the dashboard until the black plastic disk is removed. 3. If the sticky adhesive area breaks apart or does not come off completely, re-apply a small amount of alcohol (or adhesive removal liquid) and carefully lift off the remaining area by hand. Note: Adhesive disk is intended for semi-permanent installation and one-time application. Once removed, it can't be reapplied. Package 2 * 70mm Adhesive Mounting Disk
- UPC: 615150780391
- ASIN: B07GDGP73S
- Brand: APPS2Car
- Manufacturer: Gendle Technology
70mm Adhesive Mounting Disk for Car Dashboards Garmin TomTom GPS Dashboard Disc
70mm Adhesive Mounting Disk for Car Dashboards Garmin TomTom GPS Dashboard Disc
The AP036 70mm adhesive mounting disk allows you to mount an Arkon or third-party 60mm windshield suction mounting pedestal to your car’s dashboard, including mounting pedestals for Garmin and TomTom GPS devices. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Allow 24 hours for the adhesive to cure before securing the base of the mounting pedestal to the center of the disk for best results.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For an 80mm disk to use with 70mm suction mounts, see Arkon Model AP013. For a 90mm disk to use with 80mm suction mounts, see Arkon Model AP020.
- UPC: 047407510367
- ASIN: B000X6HXLA
- Brand: ARKON
- Size: 70mm disk for 60mm suctions
- Manufacturer: Arkon Resources Inc.
iOttie Adhesive Dashboard Pad for iOttie Car Mounts Flexible Dashboard Pad for Curved Surfaces
iOttie Adhesive Dashboard Pad for iOttie Car Mounts Flexible Dashboard Pad for Curved Surfaces
iOttie mounts are well-known for their unique Resuable Dashboard Pad. We now offer our optional but highly recommended accessory by itself for purchase. You can now have additional Resuable Dashboard Pad for improved mounting on textured or curved surfaces for your one touch mounts. Having additional Resuable Dashboard Pads gives our users more mounting location options than ever before. The Resuable Dashboard Pad can be easily attached and removed numerous times and does not leave any sticky residue behind. When the grip is losing its power, simply rinse and massage the Resuable Dashboard Pad under warm water and it will be restored back to its original condition.
- UPC: 852306006572
- ASIN: B074DYBQ9L
- Brand: iOttie
- Manufacturer: iOttie
Arkon 80mm Adhesive Mounting Disk for Car Dashboards GPS Smartphone Dashboard Disc
Arkon 80mm Adhesive Mounting Disk for Car Dashboards GPS Smartphone Dashboard Disc
The AP013 80mm adhesive mounting disk allows you to mount an Arkon or third-party 70mm windshield suction mounting pedestal to your car’s dashboard, including Arkon’s mounting pedestal models GN079WD-SBH, GN068WD-SBH, GN022-SBH, GN014-SBH, GN015-SBH, and GN042-SBH. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the disk adhesive to cure on the dashboard before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For a 90mm disk to use with 80mm suction mounts, see Arkon Model AP020.
- UPC: 047407500139
- ASIN: B001IB2120
- Brand: ARKON
- Size: 80mm disk for 70mm suctions
- Manufacturer: Arkon
VANMASS Dashboard Pad Mounting Disk for Suction Cup Phone Mount Stand Cradle GPS Suction Mount Sat Nav Dash Cam Holder Stick on Flat Dash Mount Pad with Sticky Gel Adhesive 3.2in Diameter (2 Pcs)
VANMASS Dashboard Pad Mounting Disk for Suction Cup Phone Mount Stand Cradle GPS Suction Mount Sat Nav Dash Cam Holder Stick on Flat Dash Mount Pad with Sticky Gel Adhesive 3.2in Diameter (2 Pcs)
- ASIN: B07MTF2114
- Brand: VANMASS
- Size: 3.15 inch
- Manufacturer: VANMASS
AccessoryBasics Lots Off 2 Pack of 3.15" (80mm) Adhesive Mounting Disk for Boat Car Dashboard GPS (Compatible with Garmin Nuvi Magellan GPS & iPhone Smartphone Mount)
AccessoryBasics Lots Off 2 Pack of 3.15" (80mm) Adhesive Mounting Disk for Boat Car Dashboard GPS (Compatible with Garmin Nuvi Magellan GPS & iPhone Smartphone Mount)
3M Adhesive mounting disc works with any 80mm or smaller suction mounting pedestal. (Garmin NUVI GPS). Installation 1) Please clean the surface with the included alcohol prep pad 2) remove the protective cover on the base or the disk 3) Press the disk on to the surface for 30 sec first 4) Attach mount on to the disk
- UPC: 620970595063
- ASIN: B01KUDXKXA
- Brand: Accessory Basics
- Manufacturer: AccessoryBasics
VICSEED 2 Pieces Adhesive Mounting Sticky Disk for Car Dashboards Vehicles Suction Cup Phone Mount with 80mm Diameter
VICSEED 2 Pieces Adhesive Mounting Sticky Disk for Car Dashboards Vehicles Suction Cup Phone Mount with 80mm Diameter
VICSEED 2 Pieces Adhesive Mounting Sticky Disk for Car Dashboards Vehicles with Windshields
- UPC: 613310210160
- ASIN: B07N5LJBXN
- Brand: VICSEED
- Manufacturer: VICSEED