Bessey K-Body REVO Fixed Jaw Parallel Clamp, 31"
Bessey K-Body REVO Fixed Jaw Parallel Clamp, 31"
This 31" fixed jaw parallel clamp features a large, flat parallel clamping surface made of impact and break resistant polyamide that comes with three replaceable pressure caps that are glue, paint and grease resistant. The internal frame ensures accurate 90-degree angles which are very sturdy even at maximum pressures. A large, comfortable two-component composite handle with a soft plastic insert makes a comfortable grip. Rail protection pieces made of same glue resistant polyamide elevate the workpiece from the rail, and the removable end rail clip ensures that the clamp sits parallel to the rail and can easily be removed to reverse sliding arm for use as a spreader.
- UPC: 735090919474
- ASIN: B001NHRHO6
- Brand: Bessey
- Manufacturer: Bessey Tools
Peachtree 40" Parallel Jaw Clamp PW3220
Peachtree 40" Parallel Jaw Clamp PW3220
Our parallel-jaw bar clamps are for quick, accurate clamping of panels, cabinet drawers and frameworks. The end stop on the steel bar helps stabilize the clamp during use and detaches to reverse the screw jaw for spreading purposes. The comfortable screw handle is super durable compound material.
- UPC: 810948015222
- ASIN: B004E8CS1S
- Brand: Peachtree Woodworking
- Manufacturer: Peachtree Woodworking
BAR CLAMP RACK BY PEACHTREE WOODWORKING PW749
BAR CLAMP RACK BY PEACHTREE WOODWORKING PW749
Need to store all your K-Body style clamps? Made from thick galvanized steel, this clamp rack is specifically designed for safe storage of bar-type clamps when not in use. Pre-drilled at 16" center, each rack holds 12 bar-style clamps.
- UPC: 810948014393
- ASIN: B0013GH0B2
- Brand: Peachtree Woodworking
- Manufacturer: Peachtree Woodworking
Peachtree 30" Parallel Jaw Clamp PW3219
Peachtree 30" Parallel Jaw Clamp PW3219
Our parallel-jaw bar clamps are for quick, accurate clamping of panels, cabinet drawers and frameworks. The end stop on the steel bar helps stabilize the clamp during use and detaches to reverse the screw jaw for spreading purposes. The comfortable screw handle is super durable compound material.
- UPC: 810948015215
- ASIN: B004E8AYC8
- Brand: Peachtree Woodworking
- Manufacturer: Peachtree Woodworking
GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG
GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG
Grr-ripper 3D push Block a must-have for any table saw user.essential protectionit's essential for superior precision, control and safety on your table saw and other major woodworking machinery. Protect your hands like never before, virtually eliminate kickback with unmatched control, and guide and rip With surgical precision. extreme controlthe powerful green grr-rip gives you a commanding hold over the work piece for total control.grr-ripper has three legs to give you three-directions of control on the keeper and off-cut work piece. It provides downward pressure to virtually eliminate kickback, inward pressure to keep the stock against the fence, and forward pressure to prevent burning.unmatched precisionstabilize your cut with the built-in balance Support to square your cut and safely handle the smallest parts of wood When cutting on the table saw or router Table. Rip as accurate as a 1/4" Standard without readjusting the fence. fully adjustablethe adjustable center Leg accommodates for a variety of different sizes and widths of material while the grip secures a virtually unlimited variety of woods, solid surfaces, aluminum or even plastic. Grr-ripper handle can be angled and adjusted for your comfort and control.total versatilitygrr-ripper videos feature over 30 unique uses on the table saw, router Table, jointer, and band saws. the powerful hold, extreme accuracy, and versatile adjustability will help you maximize your materials and greatly improve your protection against dangerous accidents. don’t use a Table saw without it.made in the USA. A true MICROJIG innovation. watch the action video and add to your cart today! 100% satisfaction guarantee. work safer. Work smarter.
- UPC: 733353322429
- ASIN: B001I9UNWC
- Brand: MICRO JIG
- Manufacturer: MICROJIG, Inc.
Kreg Tool Company KHI-SLIDE Drawer Slide Jig
Kreg Tool Company KHI-SLIDE Drawer Slide Jig
The Drawer Slide Jig takes the guesswork out of installing drawer slides. This easy-to use jig holds slides in position as you drill mounting holes in the cabinet, and it supports drawer boxes while mounting slides to the drawer. Plus, the Jig works with ball-bearing, epoxy-coated, and undermount slides for perfect positioning every time. The Drawer Slide Jig simplifies drawer installation by aligning slides in the cabinet and on the drawer. Built-in tabs make the jig easy to align to support the slide inside the cabinet, and to support the drawers as you attach the slides to them. The jig is simple to use, and it ensures that every drawer fits right and operates smoothly. Whether you’re updating cabinets or you’re building a project from scratch, mounting drawers is always a challenge. The slides have to be level, straight, and positioned properly, or the drawers won’t operate well. The Drawer Slide Jig takes the guesswork out of the process by indexing with the cabinet frame (or side on frameless cabinets) for perfect alignment. The jig supports the drawer slide level and straight while you install it in the cabinet. Then, the jig clamps on so it protrudes from the cabinet to support the drawer while you drive screws into the drawer box. With this jig, you’ll know that your slides are positioned correctly, so your drawers will operate smoothly. The Drawer Slide Jig consists of two brackets that clamp in place inside the cabinet—one on each cabinet side—and align with the cabinet face frame (or with designated marks on frameless cabinets) to support the drawer slide as you drill mounting holes. The brackets are also reversible to protrude from the cabinet, and then clamp in place perfectly aligned to support the drawer as you mount the slides to the drawer box, too. The Drawer Slide Jig works with almost all types of drawer slides, including ball-bearing, epoxy-coated, and undermount slides. The Drawer Slide Jig is designed to be intuitive for beginners... [Read More]
- UPC: 647096806644
- ASIN: B01L2T0IDQ
- Brand: Kreg Tool
- Manufacturer: Kreg
Kreg DB210 Foreman Pocket-Hole Machine, Blue
Kreg DB210 Foreman Pocket-Hole Machine, Blue
The foreman pocket-hole machine (item# DB210) makes it possible for woodworkers, cabinet shops, contractors, and dedicated do-it-yourselfer to complete projects using Kreg pocket-hole joinery with twice the speed and half the effort of a standard pocket-hole jig. Plus, the new Foreman pocket-hole machine is built with the same quality and features of its predecessor, (item# DB110), but costs less than half the price. Your will immediately appreciate all of the great features the upgraded Foreman has to offer. With one pull of the handle, They can start the motor, clamp their workpiece, and drill perfect pocket holes. The adjustable fence positions The workpiece for precise pocket depth, and a pair of adjustable stops provide repeatable accuracy. A powerful 110-Volt motor enables fast drilling, and a quick-change chuck allows for fast, tool-free bit changes. Plus, the new Foreman is the first Kreg pocket-hole machine that can create all three types of Kreg pocket holes: standard, micro-pockettm, and HD (heavy-duty). please note: Micro and HD bits are sold separately. Combine these innovative features and you have the Kreg Foreman DB210 - The versatile, affordable, high -speed solution for pocket-hole construction.
- UPC: 732454541821
- ASIN: B00KXVBOQU
- Brand: KREG
- Size: 1-(Pack)
- Manufacturer: Kreg
Adjustable Universal Fence Clamps 2-pack Ideal for Clamping Sub Fences to Table Saws and Can Be Used to Hold Jigs and Fixtures in Place
Adjustable Universal Fence Clamps 2-pack Ideal for Clamping Sub Fences to Table Saws and Can Be Used to Hold Jigs and Fixtures in Place
When making auxiliary fences most of us have the issue of our clamps getting in the way of the cut or in our line of site. Not only can that be frustrating, that can also be very dangerous. With these new fully adjustable fence clamps, that problem all but disappears. The adjustable fence clamps won't interfere with your work and they can be used for many other shop made auxiliary fences if needed. The clamp pin will fit into a 3/8" hole that needs to be drilled into your auxiliary fence. Note: Your fence should be at least 3/4" thick to ensure that there is enough clearance for the 3/8" hole. When fully extended the clamp measures approximately 5-3/4" in clamping capacity, which means it will fit almost any size tablesaw fence. With these clamps you won't have to worry about using cumbersome C-clamps or wood screw clamps that honestly just get in the way. More importantly you don't have to drill screw holes into your factory or after market fence(s). The Adjustable Fence Clamps work great on tablesaw fences, router fences, re-saw fences for the bandsaw, and more. You can also use the clamps individually with a block of wood for a stop block and other jigs and fixtures. Each package comes with a set of two fully Adjustable Fence Clamps.
- UPC: 810948019725
- ASIN: B003VHYNU2
- Brand: Peachtree Woodworking Supply
- Manufacturer: Fulton
Peachtree Parallel Clamp Blocks Set Of Four PW3222
Peachtree Parallel Clamp Blocks Set Of Four PW3222
Parallel Clamp Blocks are packaged 4 to a set. They are used with four Parallel clamps (not included) for quick, easy and perfectly square set-up for projects like raised panel doors, entrance doors, cabinets, window frames, picture frames, boxes
- UPC: 810948015246
- ASIN: B004E85S92
- Brand: Peachtree Woodworking
- Manufacturer: Peachtree Woodworking