Tekonsha 90195 P3 Electronic Brake Control

Tekonsha 90195 P3 Electronic Brake Control

5 storable setting options with preferences of multiple drivers, and for pulling different trailers up to 4 axles.

  • UPC: 735479076354
  • ASIN: B000P17NXQ
  • Brand: Tekonsha
  • Manufacturer: Tekonsha

Reese Towpower 8508211 Control Proportional Brake-EVN

Reese Towpower 8508211 Control Proportional Brake-EVN

The Reese Towpower BRAKE-EVN brake controller offers advanced proportional braking by applying brake pressure to match the vehicles deceleration rate. Proportional braking gets you get smoother stops that traditional time based controls. The boost feature gives the ability to apply more initial braking at the onset of stopping when towing heavier loads. When adjusted properly for your load, proportional brake controls can even extend the life of your vehicles brakes. The large LED display is easy to see when adjusting the control to handle the weight of your loaded or unloaded trailer. The BRAKE-EVN brake control can handle up to brake 4 axles and offers a simple plug in installation option, so be sure to get the proper factory harness for your vehicle. The perfect choice for light or heavy trailer loads.

  • UPC: 042899850823
  • ASIN: B01M59QRWK
  • Brand: Reese Towpower
  • Manufacturer: Reese Towpower

Reese Towpower 8508700 Compact IQ Brake Control

Reese Towpower 8508700 Compact IQ Brake Control

The REESE Towpower's Compact IQ professional-grade brake controller helps alleviate the stress placed on a vehicle when towing heavy loads. The controller offers advanced proportional braking by applying just the right amount of brake pressure needed to match the vehicle's deceleration rate.

  • UPC: 042899850878
  • ASIN: B073WX65YL
  • Brand: Reese Towpower
  • Manufacturer: Reese Towpower

REESE Towpower 8507111 Brakeman IV Digital Brake Control, Small Compact Design

REESE Towpower 8507111 Brakeman IV Digital Brake Control, Small Compact Design

The REESE Towpower Brakeman IV is a smart electric brake controller that mounts in any direction with no leveling required. Its small, compact design and pre-wired plug-and-play feature allow for quick and easy connection to 2-, 4-, 6- and 8- brake systems. This 100% solid-state electronic includes two separate easy push-button adjustment controls (output and sync) that allow for not only different trailer weights (output) but also the speed of activation (sync) depending on your driving style. For easy-reading, the bright and prominent digital display clearly indicates the output setting, sync setting, brake overload or short connection. Smoother braking starts with a sensing device that determines the voltage power being delivered to the towing vehicle’s brakes and assists in accurately adjusting the trailer brakes for city or highway driving. Safety is key, which is why this controller includes advanced internal circuit protection to help prevent damage and is meant for use on 12-volt negative ground systems only. This essential accessory is backed by a limited lifetime warranty.

  • UPC: 042899850717
  • ASIN: B017NAH5WK
  • Brand: Reese Towpower
  • Size: Small
  • Manufacturer: Reese Towpower

Tekonsha 3035-P Brake Control Wiring Adapter for Ford

Tekonsha 3035-P Brake Control Wiring Adapter for Ford

All vehicle specific brake control wiring harnesses are available in 1-Plug or 2-Plug styles. 1-Plug units are designed for brake controls manufactured with electrical wiring mounted on the back of the unit, otherwise known as a pigtail. Wiring harnesses must be spliced into the existing pigtail to allow the vehicle specific plug to be installed. 2-Plug units are designed for brake controls that have a wiring port built into the back of the unit. Simply plug the brake control end of the wiring harness into the back of the brake control and the vehicle end into the automobile's port. Brake controls that utilize the 2-plug style of wiring harness will be identified with the Plug and Play logo.

  • UPC: 747730066103
  • ASIN: B001NZQIDE
  • Brand: Tekonsha
  • Manufacturer: Tekonsha

Tekonsha 3040-P Trailer Brake Control Wiring Harness-2 Plugs, Toyota

Tekonsha 3040-P Trailer Brake Control Wiring Harness-2 Plugs, Toyota

All vehicle specific brake control wiring harnesses are available in 1-Plug or 2-Plug styles. 1-Plug units are designed for brake controls manufactured with electrical wiring mounted on the back of the unit, otherwise known as a pigtail. Wiring harnesses must be spliced into the existing pigtail to allow the vehicle specific plug to be installed. 2-Plug units are designed for brake controls that have a wiring port built into the back of the unit. Simply plug the brake control end of the wiring harness into the back of the brake control and the vehicle end into the automobile's port. Brake controls that utilize the 2-plug style of wiring harness will be identified with the Plug and Play logo.

  • UPC: 012303952818
  • ASIN: B001NZQIFM
  • Brand: Tekonsha
  • Manufacturer: Tekonsha

Tekonsha 90885 Prodigy P2 Electronic Brake Control

Tekonsha 90885 Prodigy P2 Electronic Brake Control

Reverse battery protection for both vehicle and breakaway. Designed to work with electric over hydraulic brake systems. Numerous mounting options - including 360 degree vertical rotation. Digital display depicts voltage delivery to trailer during braking. No level adjustment necessary - it adjusts itself to varying terrain as you drive. Great for backing into tough spots! Works proportionally in reverse with the ability to disable when not needed. Produces stops that are in proportion to vehicles deceleration rate. "Boost" feature gives users the ability to apply more initial trailer braking power when towing heavier trailers. Continual diagnostics check for proper connection, shorted magnet conditions and much more. Quick and easy disconnect feature allows user to remove and store the control when not in use. Electric trailer brake control for up to 4 braking axles.

  • UPC: 783192026033
  • ASIN: B002YIACG8
  • Brand: Tekonsha
  • Size: 1
  • Manufacturer: Tekonsha

Reese Towpower 74377 Pod Brake control, Black

Reese Towpower 74377 Pod Brake control, Black

Reese Towpower Pod Brake control is your best choice for one or two axle trailer, especially when your installation options are limited. The controller features solid state electronics, power-on LED for a positive tow vehicle-to-trailer connection and up-front manual over-ride controls. Mounting hardware included for a smooth and simple installation.

  • UPC: 016118049282
  • ASIN: B000CQSKV8
  • Brand: Reese Towpower
  • Manufacturer: Reese Towpower

Tekonsha 90160 Primus IQ Electronic Brake Control

Tekonsha 90160 Primus IQ Electronic Brake Control

A totally proportional electric trailer brake control, the PrimusIQ is self-leveling so no level adjustment is necessary. Utilizing the primary sensor technology from Prodigy, the PrimusIQ now includes the Boost feature that gives users the ability to apply more initial trailer braking when towing heavier trailers. It works proportionally in reverse for backing into tough spots and includes a snap-in dash mounting clip and removable electrical connector that allows the unit to be quickly stored when not in use. You will appreciate the digital readout depicting a secure electrical connection, amount of voltage delivery to the trailer brakes and diagnostic features incorporated in the LED display.

  • UPC: 389474927953
  • ASIN: B001P11SCM
  • Brand: Tekonsha
  • Manufacturer: Tekonsha

CURT 51110 Venturer Electric Trailer Brake Controller

CURT 51110 Venturer Electric Trailer Brake Controller

The Venturer is a compact, easy-to-set-up time-based brake controller. It can be mounted at any angle and has an automatic power level adjustment feature. It can operate one to three axles at a time, meaning two to six brakes, and has an LED display for monitoring brake pressure. Venturer is compatible with anti-lock brakes, cruise control and comes with a limited lifetime warranty. This CURT trailer brake controller is designed to work with quick plugs so it can readily plug into your vehicle's original equipment socket. It also includes a mounting bracket and hardware for easy installation. A brake controller should be mounted somewhere on the dash of your vehicle, and we recommend putting it below the steering wheel, either on the right or left side of the steering column. This way the control will not block your view when driving, but it will remain accessible and visible when adjustment is needed.

  • UPC: 612314511105
  • ASIN: B0033WDG58
  • Brand: CURT
  • Manufacturer: Curt Manufacturing