Sewell Direct BlastIR Wireless Pro IR Repeater, Remote Control Extender Kit (IR Emitter and Receiver)

Sewell Direct BlastIR Wireless Pro IR Repeater, Remote

Multizone: Protect from Interference Most IR extenders are programmed to pass any signal that is sent through the receiver. Sometimes this may disrupt your setup as a few devices in your closet run on a similar IR frequency and cause interference with one another. The Multizone feature protects your devices from interference from other devices. This gives you the ability to have certain devices controlled only from specific areas in your setup. This has been a requested feature from many of our customers as they have extended IR signals but unintentionally were controlling two devices located in the same space. Cable boxes have especially been a pain since multiple cable boxes are easier to have based in the same area. Now with the BlastIR Wireless Multizone you are able to ensure you will only control the box that is attached to one of your TVs and not the other. The Channel IR System The Multizone feature works on a 10-channel system, this system gives you the ability to interact with your devices without needing to worry about your Wireless Extenders interfereing with one another. The system also gives you the option of using any number of transmitters or receivers on any given channel. This gives you complete freedom of choice for where your displays and devices can be placed without having to complicate your setup. The BlastIR Wireless Multizone Receivers will only communicate with the BlastIR Wireless Multizone Emitters that are set to the same channel. If you happen to own the classic BlastIR Wireless, this product will also work with it. Channel 0 on this product will allow IR signals to be sent between the two diffferent versions.

  • Asin: B074CNWJZV
  • Color: Black
  • Brand: Sewell Direct
  • UPC: 685289329884
  • Size: Standard
  • Manufacturer: Sewell Direct

Sewell Direct SW-29727-50 50-Feet IR (Infrared) Extension Cable

Sewell Direct SW-29727-50 50-Feet IR (Infrared) Extension

The Sewell IR Extension Cable provides the perfect solution for extending your IR signal and any other stereo cables. Our advanced design ensures maximum signal transfer and minimizes interference. The high quality stress relief design of the Sewell IR Extension Cable allows optimal flexibility without damaging the cable.

  • Asin: B00SZJ0OXG
  • Brand: Sewell Direct
  • UPC: 685289247270
  • Size: 50 ft
  • Manufacturer: Sewell Development Corp. dba Sewell Direct

OREI Wireless HDMI Transmitter Receiver Extender 1080P Kit with IR Remote - Up to 165 Ft - 5 Ghz Frequency - Perfect for Streaming from Laptop, PC, Cable, Netflix, YouTube, PS4 to HDTV/Projector

OREI Wireless HDMI Transmitter Receiver Extender 1080P Kit

This HDMI wireless extender includes transmitter unit and receiver unit, allows to transmit and extend HDMI signal up to 50 meters long away wirelessly, it has strong anti-interference ability by running at 5GHz operation frequency, and supports point to point connection. IR passback with 20-60KHz frequency helps to remote control the source device from the receiver side. It is really a very good solution for meeting, conference, home entertainment and multi-media education etc. Note: 1) Transmission distance will be different due to the environment. 2) Wall, brick or glass will shorten the signal cover range or cause big signal loss.

  • Asin: B07B445FWB
  • Color: Black
  • Brand: Orei
  • UPC: 854339007335
  • Size: Wireless Extender - 165 Feet
  • Manufacturer: Orei

TNP Wireless IR Extender Repeater - Universal Remote Control Infrared IR Transmitter and Receiver with 3 Head Eye IR Blaster Emitter Booster Cable Supports Long Range 600FT

TNP Wireless IR Extender Repeater - Universal Remote

Do you want to control audio and video devices like AV receiver, DVD Blu-ray player, and satellite receiver set top box STB etc, that are located in another room or inside your AV component cabinet? Are you tired of leaving the cabinet door open so your remote can operate your devices? Why try to hide an old large antiquated bulky wireless transmitter behind your ultra-thin TV. Our wireless IR extender repeater is easy to install with ultra compact design.This wireless remote control transmitter and receiver system kit allows you to control devices up to 600 feet away through walls, doors, ceilings, floors, etc... This device lets you go from room-to-room and control your components from up to 500 + feet away, with no direct line-of-sight needed. It even works through closet door and closed entertainment system cabinet.Specification:You can set the Transmitter out near the TV and the built-in IR window on it will pick up the signal from your remote and send the command to the Wireless IR Receiver that will control your devices.Another setup option is through the wired IR Receiver (included) to pickup the IR signals, this allows you to hide the transmitter behind your TV. So all you have to do is put the small IR receiver in line of sight to your remote. When the IR receiver unit gets the signal from the IR transmitter, the unit has a built in IR blaster that then floods the area with the IR signals.If you need to extend the IR blaster emitter cable, you can use a 3.5mm stereo audio extension cable and a 2.5mm to 3.5mm adapter at one end and a 3.5mm to 2.5mm adapter at the other end.Not compatible with components that use RF remotesPackage Content:1x IR Transmitter Unit (TX)1x IR Receiver Unit (RX)1x IR Receiver Cable1x IR Blaster Emitter Cable

  • Asin: B01I9CXYE4
  • Brand: TNP Products
  • UPC: 815656027895
  • Manufacturer: TNP Products

Inteset HDMI IR Extender for Connecting One A/V Device to a Display Over existing HDMI Cable

Inteset HDMI IR Extender for Connecting One A/V

Description: This kit allows you to control any A/V device such as your cable box, A/V amp/receiver, etc. that has an HDMI cable connecting your A/V device to your TV or Display. A popular use of the kit is when the device you want to control is in a different room or behind closed doors. The kit uses the CEC channel that is part of almost all HDMI cables. Some older HDMI cables will not work because they do not have the needed channel. A good quality HDMI cable will allow you to control your device from up to 75 feet or more. The higher the quality of your cable the longer the transmit distance. Any remote that controls your A/V device will work with this kit. Most Universal Remotes including our INT422 Remote can be used with this set-up.Installation is simple. Attach each end of your HDMI cable to one of the adapters. (Either adapter will work as the TX or RX unit) Then plug the adapters directly into the device you want to control and into the display device such as your TV. Both adapters must be set to "IR". Then plug the IR receiver cable into the 3.5 mini connector on the adapter at your display and mount it where your remote can see the front of the IR receiver casing. At the A/V device you want to control you plug the IR Emitter cable into the 3.5 mini connector on the adapter you installed and place the Emitter casing near the IR receiver in the front panel of the A/V device. Specifications: Carrier frequency- Broadband (20kHz to 60kHz), IR receiving distance: 30 feet, Max Operating Current: 15mA, Cable length of IR Receiver and Emitter: 5', IR Adapter size: 1.50"L x 0.83"W x 0.43"H. No additional power is required.If you have any questions or issues you can contact us at: http://universalremotes.net/.

  • Asin: B01H417ICA
  • Brand: Inteset
  • UPC: 722512375918
  • Manufacturer: Inteset Technologies

StarTech.com VGA Video Extender over Cat5 ST121 Series - Up to 500 feet - 150m - VGA over Cat 5 Extender - 2 Local and 2 Remote

StarTech.com VGA Video Extender over Cat5 ST121 Series

The ST121UTP VGA Video Extender over Cat5 allows you to extend your VGA video signal by up to 150 meters (500 feet) and connect up to 4 displays (2 local and 2 remote) from that single source. The ST121UTP is a bundled kit including both a local transmitter and a remote receiver unit, offering a complete solution for scenarios in which remote monitor displays are required. The local unit features a single VGA input as well as two VGA outputs giving you the ability to view and split your source VGA signal to two independent displays locally. The VGA video signal is then sent over standard 4 pair Category 5 or better UTP cable to the remote unit which also features two additional VGA outputs giving you the freedom to display your VGA source on up to four monitors in total. The included a mounting bracket for the ST121UTP receiver provides versatile mounting options such as a wall, desk or cabinet. This product is TAA compliant and backed by a Startech.com 2-year warranty with free lifetime technical support.

  • Asin: B000050ZTF
  • Color: One Color
  • Brand: StarTech
  • UPC: 065030791236
  • Size: Two power adapters
  • Manufacturer: STARTECH.COM

Adhesive Double Sided Tape/Pads for Hidden Remote Control Extenders - Compatible with Most Infrared Remote Extender Repeaters - Nextronics

Adhesive Double Sided Tape/Pads for Hidden Remote Control

Adhesive pads for hidden remote control extenders are made of the highest quality double sided foam tape. Compatible with Most Remote Extender Repeaters and systems. Includes 10 total pads. 5 receiver pads and 5 emitter pads. Does NOT include any remote repeater or extender system. Only includes adhesive pads.

  • Asin: B01MTS1LYC
  • Brand: Nextronics
  • UPC: 703610921696
  • Manufacturer: Nextronics

660FT 1080P HDMI Wireless Extender Kit, NexTrend 5G HDMI Wireless Transmitter and Receiver -Loop Out-IR Remote Streaming Full HD 3D Video Audio from PC, Cable, Netflix, YouTube, Xbox to HDTV/Projector

660FT 1080P HDMI Wireless Extender Kit, NexTrend 5G

5G 200m DUAL ANTENNA WIRELESS 1080P SPECIFICATIONS: HDMI resolution: up to [email protected]/60Hz HDMI Audio Format: LPCM2.0/48KHz/16Bit Max bandwidth: 225MHz HDMI Max baud rate: 6.75Gbps Input/Output TMDS signal: 0.5~1.5Volts p-p(TTL) Input/Output DDC signal: 5Volts p-p (TTL) HDMI output cable distance: ≤12m AWG26 HDMI standard cable Antenna type: External dual 3dBi gain antenna Wireless standard: IEEE 802.11a/n Wireless Band: 5GHz ISM Band Max Data rates: 2T2R up to 300Mbps Transmit Output Power(IPEX): 20dBm Max Transmission distance: up to 200m (in open space) IR Carrier frequency: 20-60KHz TX/RX Max working current: 1A Power adapter format Input: AC 100V~240V 50HZ/60Hz, DC5V/2A Operating Temperature range: -5 to +45℃ Case Dimension (L x W x H): 127.5x127.5x25 (mm) Weight : TX163g/RX160g HOW TO INSTALL: 1. Connect one HDMI cable from the DVD/BD player into the HDMI input port of the HDMI wireless TX 2. Connect one HDMI cable from TV/Monitor into the HDMI output port of the HDMI wireless RX 3. Connect the IR Transmitter cable to the HDMI wireless TX and the IR Transmitter cable must face to the control target device 4. Connect IR Receiver cable to the HDMI wireless RX 5. Connect 5V power supplies to the TX&RX, the POWER indicator will be lit at this moment 6. The device will automatically connect after power on. The STATUS indicator of TX and RX will be lit when the connection is successful. If the HDMI input or output signal is normal, the HDMI indicator light will be lit also. The STATUS indicator ashes continuously during normal transmiss

  • Asin: B07K3RGCX6
  • Color: 660FT HDMI WIRELESS EXTENDER(1 to 1, not support 1 to many)
  • Brand: NexTrend
  • UPC: 639853520252
  • Size: HDMI Extender
  • Manufacturer: NexTrend

BAFX Products IR Remote Control Extender/IR Repeater Kit / BAFX3233

BAFX Products IR Remote Control Extender/IR Repeater Kit

Now with greater dual band compatibility our kit will work with ALL IR controlled devices!Want to place the cable box or other A/V devices out of sight yet be able to control them from in front of your TV? Our IR Repeater (aka remote control extender) kit allows you to do just that!How it works: The kit will relay the IR signal, through wires, from where you are using the remote control to the end device. The IR receiver of the kit (eye) is placed within sight of (within 25') of where you will use the remote control from. The emitter from the kit is placed over the IR receiver on the device being controlled & each receiver & emitter wire is plugged into the distribution block. Now, when pressing a button on the remote control, the signal will be amplified & sent through the system to your devices!Kit includes: 1 Distribution block 1 IR Receiver (5' long tip to tip) 4 Dual head IR emitters for up to 8 devices (Cables are 8.5' long) 1 Power adapter Manual Link to a setup video 1 Year Manufacturer WarrantySpecs IR receiver cord is 5' long - receiving range up to 25' Emitter cables are 8.5' long - emitting range 2-4" Receiver & emitters can be extended using a 3.5mm Stereo AV extension cable Distribution block measures approx. 1.9"x4.3"x0.87" & has slots for mounting Distribution block can be powered by a USB printer cable (NOT included) Expandable to 3 IR receivers & 6 emitter cables*IMPORTANT* PLASMA TV'S Plasma TV's emit infrared signals that can interfere with the IR receiver of the repeater (Not applicable to LCD or LED). This can be fixed by placing the IR receiver slightly further away from the plasma TV

  • Asin: B009ZGK6QS
  • Color: Black
  • Brand: BAFX Products
  • UPC: 859261003233
  • Size: Single Zone (Standard)
  • Manufacturer: BAFX Products

Next Generation Remote Control Extender

Next Generation Remote Control

  • Asin: B000C1Z0HA
  • Brand: Next Generation
  • UPC: 830022004331
  • Manufacturer: Next Generation