Best Ssd Docking Stations TOP 10 searching results

StarTech.com Universal Hard Drive Docking Station - SATA and IDE Dock - 2.5in & 3.5in HDD and SSD Docking Station with UASP & SATA III

This USB 3.0 Universal HDD / SSD Dock enables you to instantly access your 2.5 or 3.5" IDE and SATA hard drives through two top loading drive slots, saving you the hassle of mounting the drives into a computer or external enclosure or tray.Enhanced with UASP (USB Attached SCSI Protocol), this hard drive docking station lets you get the most out of the fastest drive technologies such as SATA III (6Gbps), solid state drives (SSD) and hybrid, drives with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. The slot-loading design holds the SATA and IDE drives upright inside the docks, keeping them off the desk, for convenience and a clutter-free setup. For SATA drives, the HDD can be inserted and connected directly through the designated dock slot, while the IDE drive slot is positioned near the rear panel 40-pin data and LP4 power connections, making it easy to connect to the dock using the included IDE data and power cables.A single USB 3.0 connection to your host computer, enables access to both the IDE & SATA hard drives simultaneously - a convenient solution for migrating data from an IDE drive to a SATA drive or vice versa. The dock can also be used to increase the storage and backup capabilities of your computer system with support for high capacity drives (tested with up to 6TB 3.5" and 2TB 2.5" drives). UNIDOCKU33 is backed by a StarTech.com 2-year warranty and free lifetime technical support. Improved Performance with UASP UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.

UPC: 065030859813
ASIN: B00T0ZRAOK
Brand: StarTech
Size: 2-Bay
Manufacturer: STARTECH.COM

View Product

Sabrent 4-Bay USB 3.0 SATA 2.5"/3.5" SSD/HDD Docking Station (DS-U3B4)

The Sabrent DS-U3B4 4-Bay USB 3.0 SATA 2.5/3.5 SSD/HDD Docking Station allows you to insert your standard 2.5” or 3.5” drive(s) into the docking station bays and instantly access drive content/transfer data on up to 4 hard drives at one time; fully hot-swappable. The Sabrent 4-Bay Docking Station requires no installation, no enclosure assembly, no software, and no driver downloads; just plug and play. Employ your Sabrent 4-Bay Docking Station to promptly clone your drives with just the push of a button. Features: Tool-free installation, plug and play, hot swappable. Transfer speeds up to 5Gbps. Supports four SSD/HDD drives, 2.5”or 3.5,” at one time. Backwards compatible with USB 2.0/1.1. LED indicators. Compatible with: Windows OS. Mac OS 10.X or Higher. Power Supply Specifications: AC Adapter. Input: 100-240V, 50/60 hZ 2A Max. Output: 12V =6.5A. Box Contents: 4-Bay HDD Docking Station. USB cable. Power adapter. User manual.

UPC: 819921016225
ASIN: B07H11KXCL
Brand: Sabrent
Manufacturer: Sabrent

View Product

Sabrent USB 3.0 4 Bay 2.5" Hard Drive/SSD Docking Station with Fan (DS-4SSD)

The Sabrent SATA Hard Drive Docking Station enables you to access SSDs and 2.5" hard drives, without the frustration of assembling hard drive enclosures. By inserting a 2.5" SATA hard drive directly into this docking station, you can quickly access drive contents and transfer files. Transfer data quickly and easily through USB 3.0 at speeds up to 5Gbps. FeaturesRead and write four hard drives simultaneously.Plug and PlayTool-free installationBuilt in fanRead and write up to four hard drives at speeds up 5GbpsSystem requirements: Available USB 3.0 for high speed data transfer Reverse compatible with USB 1.1 & USB 2.0.Windows: 7/8/8.1/10 (Both 32-bit & 64-bit versions)MAC: OS XPackage Contents: Sabrent DS-4SSD Hard Drive DockPower SupplyUSB 3.0 cableUser Manual

UPC: 819921013187
ASIN: B0711L68MS
Brand: Sabrent
Manufacturer: Sabrent

View Product

Inateck SATA Hard Drive Docking Station, USB 3.0 SSD Docking Station,Dual Bay,FD2005

Supports up to 16 TB Inateck's attractive gamer style FD2005 is an excellent solution for transferring and organizing data on SSD & HDD SATA drives. It features two docking ports that can be used simultaneously and support drive up to 16 TB! Offline Cloning Don't have a computer? No problem! FD2005 supports computer free offline cloning! Only offline clone can be supported. UASP Superspeed We've included the ASM1156 chip in it. This supports UASP, which means dependable, high-quality data transfers to and from your external hard drive at speeds up to 6 Gbps! Auto-Sleep Function The FD2005's automatic sleep function is an excellent feature. It conserves energy and prevents overheating, but this wasn't enough. We had to make sure this feature was user friendly and we did just that using an intuitive LED lighting system. Intuitive LED Lighting System The left-hand light and right-hand light will turn blue respectively when either Disk A or Disk B are inserted, and will flash when either is activated. Four blue LED lights clearly track your data's progress during offline cloning from 25% to 50%, 75% and finally 100%. Attention -The target disk must be larger than the source disk. -Please backup files in the target hard drive before cloning. Any files in target hard drive will be overwritten when offline cloning occurs. -To avoid data transfer errors, overheating and damage to the device please make sure that there are no faulty driver cells. -To avoid data loss, do not remove or insert drives when one drive is working in the docking station. Please power off the docking station before removing.

ASIN: B06XYL599P
Brand: Inateck
Size: Two Bay
Manufacturer: Inateck

View Product

Inateck Type C SATA Hard Drive Docking Station , USB 3.0 SSD Docking Station,Dual Bay,FD2002C

Up-to-date C Port USB Type C ports are equipped to connect upstream devices, supplemented with a C-C USB cable to facilitate use. A perfect fit for Type C laptops and tablets, including MacBook 12 inch, MacBook Pro 2016, Dell XPS series and etc. Super convenient reversible connector contributes to a longer lifetime. You can also use the dock with Type A computers by connecting via a C-A cable. HDD/SSD Offline Duplicator Data on two hard drives is accessible at the same time. Without any computer involved, data can be duplicated from one hard drive to another conveniently and speedily. A 12V 3A power adapter is included to supply sufficient power for data transfer. Support UASP and SATA 6Gbps Available - The UASP Transfer Protocol can only accelerate read and write speed of SSD hard disk High-class chipset ASM1156+ASM1453, enhanced with UASP Transfer Protocol, this dock lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps) with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled computer. More Features - Supports offline cloning, with no drivers needed and easy installation - Support 2x 8TB hard drive; Supports 2.5" & 3.5" SATA (SATA I/ II/ III) HDD and SSD - Equipped with Type C USB 3.1; Backward compatible with USB 3.0/2.0 /1.1 - Compatible Systems: Windows 7/ 8/10, Mac OS - On/Off power switch; LED light indicates Power and Activity status; Initiates sleep mode after 30 minutes of no operation Chip scheme: ASM1453 + ASM1156 Indicator: Power: Yellow; Disk: Green; Progress: Blue Dimensions: 145 x 109 x 60mm Weight: 243g Performance: Supports UASP, Transmission speed up to 400MB/s Package Content: 1*FD2002C docking station 1* Type C to Type C cable 1.2m 1*power adapter，input 100-240V~ 50-60Hz 1.2A Max output DC 12V 3A 1*manual instruction

ASIN: B075SW1W4J
Brand: Inateck
Manufacturer: Inateck

View Product

Sabrent USB 3.0 to SATA I/II/III Dual Bay External Hard Drive Docking Station for 2.5 or 3.5in HDD, SSD with Hard Drive Duplicator/Cloner Function [10TB Support] (EC-HD2B)

The Sabrent SATA hard Drive docking station enables you to access desktop or laptop hard drives, without the frustration of assembling hard drive enclosures. By inserting a 2. 5"/3. 5" Sata hard Drive directly into this docking station, you can quickly access drive contents and transfer files. Plus you can swap out hard drives effortlessly With plug and play mounting. Transfer data quickly and easily through USB 3. 0 at speeds up to 5Gbps. to use Hard drive offline clone function: 1. Insert source disk into hard drive bay A, then insert target disk into hard drive bay B. 2. Make sure that the USB cable is disconnected from your computer. 3. Connect power supply and switch on power. 4. Hold down the clone button, release when you see a blue LED. 5. Then quickly press the clone button. 6. A blue LED will flash on 25% indicating that the cloning process has begun. 7. The cloning process is complete when all the lights turn solid blue (25%-100%). 8. Finally press the power switch to the off position and eject your drives. system requirements: Windows Mac: OS package Contents: docking station power supply USB 3. 0 cable user Manu

UPC: 819921013699
ASIN: B0759567JT
Brand: Sabrent
Size: Two Bay
Manufacturer: Sabrent

View Product

WAVLINK USB 3.0 to SATA (5Gbps) Dual-Bay Hard Drive Docking Station for 2.5 inch/3.5 Inch HDD,SSD Support Offline Clone/Backup/UASP Functions [10TB×2 ]-Black

What Does This Product Do? Wavlink Dual Bay HDD/SSD Storage Docking Station ST334U, allows you to install and access SATA drives quickly, it is a perfect solution for data recovery, drive imaging, and testing centers, or any environment requiring fast access to uninstalled/archived drives. Hard Drive Duplicator Function HDD A----Source HDD HDD B----Target HDD 1.Make sure there are no connection on the USB. 2.Ensure the Power Switch on the rear is in the OFF Position and plugged in properly. 2. Insert the HDD A in the rear near the power plug and insert the HDD B in the front. 3.Offline clone is from HDD A to HDD B. Make sure your Main Drive is in HDD A and slave in HDD BThe capacity of HDD B must be equal or bigger than HDD A. 4. Press and hold the offline clone button for 3 seconds, the LED indicator will light up. Then quickly press the offline clone button and the offline clone operation will start. Each LED represents 25% completion. It is only when every 25% of HDD A is offline clone to HDD B that such LED will remain constantly on. When offline clone operation is fully completed, all LEDs will constant on until the device is power off. Features: * Support 2x 8TB hard drive; Supports 2.5" & 3.5" SATA (SATA I/ II/ III) HDD and SSD *Equipped with USB3.0; Support SATA III (6 Gbps) and UASP for optimal performance; Backward compatible with USB 2.0 /1.1 * On/Off power switch. LED light indicates Power and Activity status. * Hot-swappable, plug and play, no drivers needed. System Support: supports Win XP/Vista/7/8/8.1/10 and MAC OS X Backup Tool : http://www.win-star.com/download/Drivers/ST_V1.9.zipMAC 10.2 or above(mac not supports backup) What's in the box? 1 x Dual Bay SATA HDD Docking Station 1 x 12V 3A Power Adapter 1 x USB 3.0 Cable 1 x User's Manual 1 x Warranty Card

ASIN: B018FTE87S
Brand: WAVLINK
Manufacturer: WAVLINK

View Product

Unitek USB 3.0 to SATA I/II/III Dual Bay External Hard Drive Docking Station for 2.5/3.5-Inch HDD SSD, Hard Drive Duplicator, Offline Clone Function, Support UASP and 10TB - Black

Unitek USB 3.0 SATA hard Drive docking station helps you transfer mass data, store movies, games and images by inserting a 2.5"/3.5" Sata hard Drive. hdd/SSD off-line clonethis SATA docking station supports offline clone between two disk without connecting to the computer. Put your hard disk into dual bay A and B, disk a should be the source disk while disk B is the destination disk, the capacity must be b>=a.1. Connect power supply and switch on power. 2. Hold down the clone button for 3 seconds, release when you see a blue LED.3. Then quickly press the clone button again to begin cloning. 4. A blue LED will flash on 25% indicating that the cloning process has begun, and reaches to 50%, 75%, 100%.5. The cloning process is complete when all the lights turn on (25%-100%).faster transfer speeds with uaspthe hard drive dock transfer data quickly and easily through USB 3.0 at speeds up to 5Gbps.sata III 6 GBps compatiblefast SATA III speeds up to 6 Gbps of this, deliver superior performance for a custom gaming or RAID configuration; provides secure connections for fast and reliable file transfers; backwards compatible with SATA I, II hard drives.system supportwindows XP/Vista/7/8/8.1/10 With the latest service packs Mac OS X 10.4.8 (or later) and linuxsafety & Security:package contentssata hard drive docking station x112v/3a power adapter x1usb 3.0 cable x1user manual x1warranty- 2 Year ocean technology LLC warranty- 24H customer email support

ASIN: B06XQH7VHC
Brand: Unitek
Size: Small
Manufacturer: Unitek

View Product

StarTech.com HDD Docking Station - USB 3.0 to 2.5/3.5in SATA Hard Drive Dock with Standalone HDD/SSD Eraser and Clone (SATDOCK2REU3)

The HDD Docking Station with Duplicator and Eraser Dock lets you connect your 2.5in/3.5in SATA HDDs or SSDs through SuperSpeed USB 3.0, with the ability to swap drives in and out as needed. The dock also functions as a standalone drive duplicator and eraser – an efficient and versatile solution for external drive management. Simple Hard Drive Duplication and Erasing Featuring standalone Sector by Sector hard drive duplication with built-in LED progress bar, and support for 2 drive single pass over writing the USB 3 to SATA HDD dock is a user-friendly all-in-one solution for any application requiring hard drive duplication or erasing. Maximum Compatibility With support for SATA I/II/III, and large capacity drives (tested up to 4TB) this hard drive cloner is compatible with virtually any SATA hard drive, and greatly increases the storage/backup capabilities of your computer. Extend the value of this USB 3.0 hard drive duplicator station further with the addition of our SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in. IDE hard drive into a SATA hard drive dock. The HDD docking station is backed by a 2-year StarTech.com warranty and free lifetime technical support.

UPC: 797045617705
ASIN: B00G6TG5YE
Brand: StarTech
Size: USB 3.0
Manufacturer: STARTECH.COM

View Product

WAVLINK USB 3.0 to SATA Dual-Bay External Hard Drive Docking Station with UASP for 2.5/3.5-inch HDD SSD, Hard Drive Duplicator Offline Clone Function (2 x 10TB Support)

ASIN: B07C9RSZFM
Brand: WAVLINK
Manufacturer: WAVLINK