Zoeller 98-0001 115-Volt 1/2 Horse Power Model M98 Flow-Mate Automatic Cast Iron Single Phase Submersible Sump/Effluent Pump ...

Zoeller 98-0001 115-Volt 1/2 Horse Power Model M98 Flow-Mate Automatic Cast Iron Single Phase Submersible Sump/Effluent Pump ...

98-0001 Features: -Automatic effluent submersible sump pump. -Powder coated cast iron construction dissipates motor heat and prevents rust for longer life. -Non clogging vortex impeller allows pump to pass small diameter solids. -100% Factory tested under water to ensure quality and reliability. -US made by quality craftsman. Specifications: -Voltage: 115V. -Horse power: 1/2HP. -Dimensions: 12" H x 10. 13" W.

  • UPC: 053514029463
  • ASIN: B000TK5ULA
  • Brand: Zoeller
  • Size: Pack
  • Manufacturer: Zoeller

Sta-Rite 20DOM05121 STEP Plus D-Series High Head Submersible Effluent Pump, 20 GPM, 1/2 HP, 115V

Sta-Rite 20DOM05121 STEP Plus D-Series High Head Submersible Effluent Pump, 20 GPM, 1/2 HP, 115V

The ST.E.P Plus D-Series 4" submersible pump series dominates with superior "DRAW-DOWN" capability. Great for effluent, cistern, aeration, and irrigation applications. Stainless steel body construction (300 grade). The motor is 1/2 HP, 115V, single phase, dry-wound, double ball-bearing, double-seal, with thermal overload protection. 4-1/2" pumping drawdown. 60Hz, 2-wire. Float switch not included with ST.E.P models. Exclusive self lubricating Nylatron bearing resists wear surface from sand and abrasives. Precision molded Acetal impeller for perfect balance; ultra smooth for the highest performance and efficiency. Allows for 0.08" solids. Comes with 10' power cord.

  • UPC: 762022551563
  • ASIN: B0089FO7RU
  • Brand: Sta-Rite
  • Size: 4 Inch
  • Manufacturer: Sta-Rite

Hallmark Industries MA0343X-4 Deep Well Submersible Pump, 1/2 hp, 110V, 60 Hz, 25 GPM, 150' Head, Stainless Steel, 4"

Hallmark Industries MA0343X-4 Deep Well Submersible Pump, 1/2 hp, 110V, 60 Hz, 25 GPM, 150' Head, Stainless Steel, 4"

Deep Well Submersible Pump, 1/2HP, 115V/60HZ/1PH, 25 GPM Max, 150 Feet MAX Head, S.S. SHELL 1.25" NPT discharge. Brand new product in the box! We are based in the U.S., customer services, tech support & warranty are handled in the U.S. Warning: This is a 110 (115V) pump! Using 220 (230)V will burn the pump! Warranty will void! SPECIFICATIONS AND FEATURES: * 4" deep well submersible pump, 115V, 6.5 Amps, 4 stage. * Fits a 5" or larger well casing. For 4" casing, use pump MA0460X-9, or MA0459X-14; * Patented impeller provides heavy duty high performance and pump life greater than almost all other well pumps. * Industrial grade heavy duty, also good for home usage * Built in 1/2 HP capacitor start, and thermal protection switch. For longer life and powerful start. * Built in control box (starter box). This pump DOES NOT require an external control box! * Built-in check valve. Additional check valve is recommended. * This pump uses high quality UL approved motor, UL file No.: E233961 * This is a 2 wire pump with 3-Wire (2 wires + ground wire) * 1.25" NPT discharge. 10' long electric cord , wiring kit, included. * Heavy-duty thermoplastic impellers, diffusers, and intake screen. * High efficiency, hermetically sealed motor is thermally protected to prevent overheating * Submersible design eliminates the need for priming and creates quiet operation * High efficiency and hermetically sealed motor has thermal protection prevents overheating, uses less energy. * 150 Max head is for open tank. Head will be less in pressure tanks. Read the Selection Guide for details! * Installation manual, and wiring kit are included. Free technical support available. Condition: New

  • ASIN: B00NTT2JSU
  • Brand: Hallmark Industries
  • Manufacturer: Hallmark Industries

Zoeller M53 Mighty-mate Submersible Sump Pump, 1/3 Hp

Zoeller M53 Mighty-mate Submersible Sump Pump, 1/3 Hp

Foeller Pump Co. M-53 Mighty Mate clear effluent or dewatering submersible pump. Choice of many plumbers and contractors. 1/3 HP cast iron housing with plastic vortex impeller. 9ft. power cord. Truly a all star pump. Powder coated epoxy CI and SS fasteners. Oil filled motor with thermal overload. CSA UL SSPMA

  • UPC: 053514023607
  • ASIN: B000H5PYR2
  • Brand: Zoeller
  • Size: 1
  • Manufacturer: Zoeller

Liberty Pumps 257 1/3-Horse Power 1-1/2-Inch Discharge 250-Series Cast Iron Automatic Submersible Sump/Effluent Pump with VMF Switch

Liberty Pumps 257 1/3-Horse Power 1-1/2-Inch Discharge 250-Series Cast Iron Automatic Submersible Sump/Effluent Pump with VMF Switch

Liberty Pumps 257 is a 1/3HP Automatic Submersible Sump Pump with with magnetically operated vertical float VMF switch and 10ft power cord. Turn-on level of the not adjustable switch is 7" and turn-off level is 3-1/2". This pump can operate in a smaller 10" diameter sump pit.The Liberty Pumps 257 has 1-1/2" NPT discharge, 1/2" solids-handling, 18' shut-off head, a unique one-piece cast iron housing and thermally protected permanently lubricated motor.For Sump and De-watering Applications only. This Vertical Magnetic Float (VMF) model is not recommended for effluent applications due to their short On/Off cycle. Wide angle float models (Liberty Pumps 251 and 253) are better suited for effluent applications and are easily adjustable for different On/Off levels.For added protection, consider the addition of a back-up pump such as Liberty's SJ10 SumpJet, as well as an alarm such as Liberty's ALM-2 in applications where loss of pump function could result in property damage. If an alarm is used, it must be connected to a separate electrical circuit.CAUTION Do not let the pump run dry.

  • UPC: 671812002577
  • ASIN: B001PTT5JM
  • Brand: Liberty Pumps
  • Size: Pack of 1
  • Manufacturer: Liberty Pumps

Zoeller 267-0002 Model N267 Waste-Mate Non-Automatic Cast Iron Single Phase Submersible Sewage/Effluent Pump

Zoeller 267-0002 Model N267 Waste-Mate Non-Automatic Cast Iron Single Phase Submersible Sewage/Effluent Pump

115-Volt 1/2 Horse Power Model N267 Waste-Mate Non-Automatic Cast Iron Single Phase Submersible Sewage/Effluent Pump. If the Pump operates but delivers little or no water - Check strainer housing, discharge pipe, or if check valve is used vent hole must be clear. Discharge head exceeds pump capacity. Low or incorrect voltage. Incorrect motor rotation. Capacitor defective. Incoming water containing air or causing air to enter pumping chamber

  • UPC: 053514017620
  • ASIN: B000UEV8AC
  • Brand: Zoeller
  • Size: 2
  • Manufacturer: Zoeller

Acquaer 3/4 HP Cast iron Sewage Pump+Piggy back switch

Acquaer 3/4 HP Cast iron Sewage Pump+Piggy back switch

Acquaer SEC075T-1 is a 3/4 HP submersible sewage pump used to pump out liquids and solid up to 2 in. diameter. The most common application is for spetic system or sewage pit.

  • ASIN: B0782TJDNX
  • Brand: Acquaer
  • Manufacturer: LEO Group Pump (ZHEJIANG) Co., Ltd

Franklin Electric 558223 Model WE20 g05P4-21 Series High Head Filtered Effluent Pump, 115V, Blue

Franklin Electric 558223 Model WE20 g05P4-21 Series High Head Filtered Effluent Pump, 115V, Blue

Franklin Electric submersible motor, PPO staging, 10' SJOW lead, and poppet check valve.

  • UPC: 762022552003
  • ASIN: B019YIJHAM
  • Brand: Franklin
  • Manufacturer: Franklin Electric Co., Inc.

Franklin Electric C1 Septic Water High Head Submersible Effluent Pump, 20 GPM, 1/2 HP, 115V

Franklin Electric C1 Septic Water High Head Submersible Effluent Pump, 20 GPM, 1/2 HP, 115V

About the Franklin Electric C1 Series Cistern Submersible Pumps Designed for use in gray water / filtered effluent service applications, the C1 Series cistern pump provides high performance and long life in less than ideal water conditions. The C1 Series pump is able to pass solids up to 1/8" without having a negative effect on the internal hydraulic components. The pump's unique bottom suction design allows for maximum fluid drawdown without compromising durability or overall life, and it does not require the use of a flow induction sleeve. Intended specifically for use in a cistern or tank, C1 Series pumps are suitable for use in agricultural, residential, and commercial installations. Typical Applications of the C1 Series Pump • Gray water pumping • Cistern Tanks • Aerator Tanks • Well Pump • Filtered effluent service water pumping • Water reclamation projects such as pumping from rain catchment basins • Aeration and other foundation or pond applications • Agriculture and livestock water pumping Standard Features of the Franklin C1 Series Pumps • Supplied with a removable 5" base for secure and reliable mounting • Bottom suction design • Robust thermoplastic discharge head design resists breakage during installation and operation • Single shell housing design provides a compact unit while ensuring cool and quiet operation • Hydraulic components molded from high quality engineered thermoplastics • Optimized hydraulic design allows for increased performance and decreased power usage • All metal components are made of high grade stainless steel for corrosion resistance • Available with a high quality 115 V or 230 V, ½ hp motor • Fluid flows of 10, 20, and 30 gpm, with a max shut-off pressure of over 100 psi • Heavy duty 600 V 10 foot SJOOW jacketed lead

  • UPC: 000090302015
  • ASIN: B017UKOE7M
  • Brand: Franklin Electric
  • Manufacturer: Franklin Electric

Hallmark Industries MA0387X-6 Sewage Pump, Stainless Steel, 1/2hp, 115V, with Float Switch, 3200 GPH/26' Lift, 20' Cable, Heavy Duty, Maximum Flow Rate, Stainless Steel

Hallmark Industries MA0387X-6 Sewage Pump, Stainless Steel, 1/2hp, 115V, with Float Switch, 3200 GPH/26' Lift, 20' Cable, Heavy Duty, Maximum Flow Rate, Stainless Steel

Sewage pump, Stainless Steel Housing, 1/2 HP, 115V, 1 phase, 60 hz* Max lift (head) 26', Max 3200 GPH. Compatible to 1HP pump. * Cast iron heavy duty impeller crushes hardest solids and last forever.* Include 20' power cable, electric plug, float Switch* Piggy Back Tether float switch included. * 1.5" FNPT discharge. Include a 1.5" NPT to 1.5" optional adapter. * Hermetically sealed with stainless steel/Carbon-ceramic mechanical seal* Thermal protection to prevent overheating for longer life * High quality and high efficient UL approved motor, UL file No.: E233961* 1 Year warranty for replacement parts. WARNING!! * This is for 115V

  • UPC: 740120773841
  • ASIN: B01N1FDEPA
  • Brand: Hallmark Industries
  • Manufacturer: Hallmark Industries (HAN8A)