Gorilla Wood Glue, 8 ounce Bottle

Gorilla Wood Glue, 8 ounce Bottle

Gorilla Wood Glue is the adhesive that woodworkers, carpenters and hobbyists trust for their woodworking projects. Gorilla Wood Glue, a PVA glue, offers the benefits of an easy-to use, water-based adhesive, with the holding power Gorilla is known for. This PVA glue is incredibly water resistant and dries a natural color that offers an invisible bond line for your projects. Directions: For best results, it is essential that the wood surfaces are prepared prior to application of glue. For laminating, the surfaces should be planed smooth, leaving the board surface free from machine marks, tear-out and snipes. Also, be careful to avoid burnishing and end snipes. In general, apply a generous amount of glue on one of the surfaces. On hard-to-glue woods, apply the glue on both surfaces. Rub together with the other surface to distribute the glue evenly on both surfaces. Enough glue should be applied so that a fine bead of glue squeeze-out will occur when clamping. Coverage: One gallon of Gorilla Wood Glue will cover about 200 square feet. One fluid ounce will cover approximately 1.6 square feet. Clamping: The technique and type of clamp to be used is determined by many factors. In general, apply enough pressure that will cause a fine bead of glue to squeeze out when the proper pressure is applied. Clamping Time (amount of time pressure needs to remain applied): 20–30 minutes for room temperature applications. The temperature must be above 55°F. Note that clamping time can be dependent on temperature, humidity, and the porosity of the wood. Cure Time (amount of time for glue to reach total bonding strength): 24 hours. Clean up while glue is wet: Use a clean, damp cloth to wipe off excess glue. When areas have completely dried, sand as needed. Click on the Gorilla link at the top of this page to see other quality products from the Gorilla Glue Company.

  • UPC: 735090571498
  • ASIN: B001E4E3KY
  • Brand: Gorilla
  • Size: 1 - Pack
  • Manufacturer: Gorilla

Books by Hand PH Neutral PVA Adhesive with spout - 4 ounce bottle

Books by Hand PH Neutral PVA Adhesive with spout - 4 ounce bottle

Adhesive for assembly. Natural pH adhesive s used for artistic creations such as collages, and bookbinding projects. It has excellent lay flat properties and will not become brittle over time.

  • UPC: 099295612074
  • ASIN: B0025U109S
  • Brand: Books By Hand
  • Size: 4oz bottle
  • Manufacturer: University Products Inc

Book Binding Super Cloth 18x30 Sheet by Lineco-Book Making Supplies

Book Binding Super Cloth 18x30 Sheet by Lineco-Book Making Supplies

Lineco Bookbinding Super Cloth is a fine open cotton weave that gives good adhesive penetration to unite signatures while leaving the backbone flexible. 18 x 30 inches-sold sheet by sheet. Excellent for bookbinding and other archival applications.

  • UPC: 099295532570
  • ASIN: B0007LS8G0
  • Brand: Lineco
  • Manufacturer: LINECO

Aleene's 36116 Original Tacky Glue 3 Pack, 8 Oz

Aleene's 36116 Original Tacky Glue 3 Pack, 8 Oz

Aleene's Original Tacky Glue in the distinctive, classic Gold Bottle has provided crafters and hobbyists with a premium-quality, dependable adhesive for 50 years. Nontoxic, incredibly versatile and ultra strong, Original Tacky Glue is your go-to glue for almost any craft surface. Voted America's Favorite Crafting Glue, the Gold Bottle of Original Tacky Glue reflects the standard of excellence you can expect in every drop.

  • UPC: 778564159686
  • ASIN: B01EK7LGH4
  • Brand: Aleene's
  • Size: 3 Pack
  • Manufacturer: iLoveToCreate

Gorilla Wood Glue, 18 ounce Bottle

Gorilla Wood Glue, 18 ounce Bottle

Gorilla Wood Glue is the adhesive that woodworkers, carpenters and hobbyists trust for their woodworking projects. Gorilla Wood Glue, a PVA glue, offers the benefits of an easy-to use, water-based adhesive, with the holding power Gorilla is known for. This PVA glue is incredibly water resistant and dries a natural color that offers an invisible bond line for your projects. Directions: For best results, it is essential that the wood surfaces are prepared prior to application of glue. For laminating, the surfaces should be planed smooth, leaving the board surface free from machine marks, tear-out and snipes. Also, be careful to avoid burnishing and end snipes. In general, apply a generous amount of glue on one of the surfaces. On hard-to-glue woods, apply the glue on both surfaces. Rub together with the other surface to distribute the glue evenly on both surfaces. Enough glue should be applied so that a fine bead of glue squeeze-out will occur when clamping. Coverage: One gallon of Gorilla Wood Glue will cover about 200 square feet. One fluid ounce will cover approximately 1.6 square feet. Clamping: The technique and type of clamp to be used is determined by many factors. In general, apply enough pressure that will cause a fine bead of glue to squeeze out when the proper pressure is applied. Clamping Time (amount of time pressure needs to remain applied): 20–30 minutes for room temperature applications. The temperature must be above 55°F. Note that clamping time can be dependent on temperature, humidity, and the porosity of the wood. Cure Time (amount of time for glue to reach total bonding strength): 24 hours. Clean up while glue is wet: Use a clean, damp cloth to wipe off excess glue. When areas have completely dried, sand as needed. Click on the Gorilla link at the top of this page to see other quality products from the Gorilla Glue Company.

  • UPC: 052427000125
  • ASIN: B001NN5T22
  • Brand: Gorilla
  • Size: 1 - Pack
  • Manufacturer: Gorilla

Titebond III Ultimate Wood Glue, 16-Ounces #1414

Titebond III Ultimate Wood Glue, 16-Ounces #1414

Titebond III Ultimate Wood Glue, 16-Ounces #1414

  • UPC: 037083714241
  • ASIN: B0002YQ3KA
  • Brand: Titebond
  • Size: 16 Ounce
  • Manufacturer: Titebond

Gorilla Clear Glue, 3.75 ounce Bottle, Clear (Pack of 1)

Gorilla Clear Glue, 3.75 ounce Bottle, Clear (Pack of 1)

The strength and versatility you have come to expect from Gorilla Glue is now available in an easy to use, crystal clear, non-foaming formula. Clear Gorilla Glue is incredibly strong and is ideal for indoor and outdoor applications and bonds virtually everything.

  • UPC: 052427453754
  • ASIN: B074J7XQZT
  • Brand: Gorilla
  • Size: 1 - Pack
  • Manufacturer: Gorilla Glue

Books by Hand pH Neutral PVA Adhesive, 8oz (BBHM217)

Books by Hand pH Neutral PVA Adhesive, 8oz (BBHM217)

Books by Hand pH Neutral PVA Adhesive is water soluble, solvent-free, acid-free, quality adhesive made of archival polyvinyl acetate. It can be thinned with water to extend drying time if desired. It should not become brittle with age and adheres to most porous surfaces. Ideal for bookbinding and paper projects. Dries clear and fast. 8 ounce bottle.

  • UPC: 787461407943
  • ASIN: B0025TZ26Q
  • Brand: Books By Hand
  • Size: 8 Ounce Bottle
  • Manufacturer: University Products Inc

Gorilla Clear Grip Contact Adhesive, Waterproof, 3 ounce, Clear, (Pack of 1)

Gorilla Clear Grip Contact Adhesive, Waterproof, 3 ounce, Clear, (Pack of 1)

Gorilla clear grip is the crystal clear, holds in an instant contact adhesive. Gorilla clear grip is a flexible, fast-setting, crystal clear contact adhesive that creates a strong permanent bond. Gorilla clear grip is paintable and waterproof making it great for projects both inside and out! product features: •permanent bond •crystal clear •fast grab: holds in just seconds •100% waterproof: for indoor/outdoor •No-Run formula •paintable •flexible •washer & dryer safe •photo safe Gorilla clear grip can be adhered to many surfaces including: wood, metal, stone, ceramic, glass, plastic*, PVC, brick, concrete, foam, paper, rubber, fabric, and laminate. *Note: not recommended for use on polystyrene, polypropylene or polyethylene products. Not for use on food contact surfaces. Do not dry clean. may cause damage to finished surfaces. Directions: all surfaces should be clean and free of dirt, grease and oil. Best if used between 50°f and 90°f. Clear grip should only be used in a well ventilated area. 1. Apply adhesive to each surface to be bonded. To maximize bond strength: wait approximately two minutes for adhesive partially dry before joining surfaces. 2. Press surfaces firmly together. Note: bond forms immediately and can be difficult to reposition. Cure time: allow for a minimum of 24 hours for full cure. Cure time may increase with lower temperatures and when used on non-porous surfaces. Storage tips: after each use, wipe nozzle with a dry cloth and tightly replace cap. Store in a cool, dry location. Tip: for easier re-opening, apply a thin coat of petroleum jelly to the threads before replacing cap. Store away from children and animals. Clean-up: wipe uncured adhesive with a dry cloth and clean with acetone, ISOPROPYL alcohol, or citrus based solvents according to manufacturer’s instructions. Cured adhesive may be removed by scraping from surface. Paintable when fully cured. Click on the Gorilla link at the top of this page to see other quality p... [Read More]

  • UPC: 013415753911
  • ASIN: B06WGSRM4Z
  • Brand: Gorilla
  • Size: 1 Pack
  • Manufacturer: Gorilla Glue

Unibond Super PVA Adhesive - 1 L

Unibond Super PVA Adhesive - 1 L

  • UPC: 791429428321
  • ASIN: B0052CV7W6
  • Brand: Unibond
  • Manufacturer: Unibond