Best Testo Thermals

The TPI 565C1 anemometer with telescoping hot-wire probe reaches into tight spaces to measures air velocity in m/s, fpm, knots, mph, and km/h and air temperature in degrees C and F; and has record, recall, and hold functions for analyzing air flow. The meter records and recalls minimum, maximum, and average readings and its data hold function freezes a reading on the display to aid documentation. For transferring and storing data directly to a PC, the meter has an output terminal for connecting to the RS-232 serial port of a compatible PC (interface cable sold separately). The LCD shows air velocity and temperature readings simultaneously. The meter has an auto power-off mode that shuts it down after 10 minutes of non-use to conserve battery life and has a low-battery indicator. It has European Conformity (CE) marking. This anemometer is used for monitoring air flow and temperature in ductwork, spray booths, and exhaust hoods, among other applications. SpecificationsAir velocity range0.2 to 20 m/s; 39 to 3937 fpm; 0.38 to 38 knots; 0.44 to 44 mph; 0.72 to 72 km/hAir velocity resolution0.1 m/s; 1 fpm; 0.1 knots; 0.1 mph; 0.1 km/hAir velocity accuracy+ or - (5% of reading + 3 digits)Air temperature range-20 to +80 degrees C/ -5 to +175 degrees FOperating environment0 to 50 degrees C/32 to 122 degrees F at less than 80% relative humidityPower(6) 1.5V AAA batteries (included)Probe length10 to 37 inchesMain unit dimensions (H x W x D)144 x 74 x 29 mmWeight150gH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applications to determine air flow within ducts. In addition to air velocity, anemometers may measure wind direction, air pressure, air flow volume, air temperature, humidity, light, and other p... [Read More]