Samsung GP-U999SJVLCAA Smart Things Water Leak Sensor - Automate Lights & Siren For Alert - ZigBee | Accessory to Smart Things Hub White
Samsung GP-U999SJVLCAA Smart Things Water Leak Sensor - Automate Lights & Siren For Alert - ZigBee | Accessory to Smart Things Hub White
REQUIRES: Smart Things Hub or compatible device with SmartThings Hub functionality and SmartThings app. The SmartThings water leak sensor monitors moisture and water leaks to prevent flooding or other unexpected disasters. This sensor can also monitor temperature and give alerts through thermostats to give updates on the status of your smart home. Sudden rises or Falls in temperature can be recorded and viewed from the Samsung SmartThings water leak sensor on the SmartThings free mobile app. Free SmartThings app requires Android (6.0 or later) or iOS (10.0 or later). this device is compatible with the SmartThings ADT security hub, but is not compatible with ADT professional monitoring services. Included: battery, quick-start guide, and health and safety guide. 1 year Samsung SmartThings limited warranty. Technical details: power: 1 x CR2 battery range: 50-130 feet depending on your home’s construction operating temperature: 32 to 104°f intended for indoor use only Only available for use in the U.S.
- UPC: 192969000020
- ASIN: B07F951JDP
- Brand: Samsung Electronics
- Size: Accessory to Smart Things Hub
- Manufacturer: Samsung
Aeotec ZW122 Z-Wave Water Sensor 6
Aeotec ZW122 Z-Wave Water Sensor 6
Protect your home from flooding or expensive water damage with the Aeotec Z-Wave Water Sensor 6. The Water Sensor informs you of the presence of unwanted water in sensitive areas, along with monitoring the surrounding area with additional built-in sensors. The Water Sensor 6 can detect as little as 0.5mm or 0.02 in of water in a designated area. This level of sensitivity gives you the maximum amount of time to respond to an alert before serious damage occurs. The Water Sensor 6 can be programmed to work with smart water valves or electronic sump pumps to seal shut in case of a pipe burst or leak, or even coordinate with Z-Wave controllers to shut off electronics to prevent electrical shortages. SPECIFICATIONS: Manufacturer Part #: ZW122.Dimensions: 3.8 cm (w) x 2.4cm (H). Buzzer Max Volume: 60db from 2 meters. Sensors: Air Temperature, Water Flow. Supported Notification Types: Heat Alarm, Home Security, Water Alarm. Power Supply: CR123A Lithium Battery, 3v / 1500mA. Repeater: No. Operating Humidity: 8% to 80%. Operating Temperature: 0°C to 40°C (32°F to 104°F).. Storage Temperature: -20°C to 60°C. Waterproofing: IP65 rating. Battery Life: CR123A, 3V, 1500mAh. 2 to 3 years with default setting with estimated leakage events 5 times per month. Operating Distance: Up to 492 feet (150 meters) outdoors. Warranty: 1 Year.
- UPC: 810667023843
- ASIN: B0799KLKVC
- Brand: Aeotec
- Manufacturer: Aeotec
FIBARO Flood Sensor, Newest Z-Wave Plus Water Leak & Freeze Detector, FGFS-101 ZW5
FIBARO Flood Sensor, Newest Z-Wave Plus Water Leak & Freeze Detector, FGFS-101 ZW5
The Fibaro Flood Sensor is the most functional water leak sensor for your smart home. It is designed to either be placed on the floor or a wall with the gold-plated water-sensing probes Extended by a connected wire. The device can be battery* or VDC powered (12/24 VDC). it has a built-in tilt sensor that reports any movement of the device to the central Z-Wave controller. The Fibaro Flood Sensor is buoyant and can float on the waterfall surface. It has a built-in temperature sensor that can alert you if there is an increase or decrease in temperature, which can protect your home from damage caused by frozen pipes. The Fibaro Flood Sensor is compatible with most Z-Wave smart hubs such as Home Center 2 and Lite, SmartThings, Home Seer, Vera, Clare Controls, and Nexin.
- UPC: 857934005126
- ASIN: B01H1M0SP6
- Brand: Fibaro
- Manufacturer: Fibaro
Aeotec ZW160 Z-Wave Water Sensor 6 Dock
Aeotec ZW160 Z-Wave Water Sensor 6 Dock
Enhance the abilities of the Aeon Water Sensor 6 with the Aeotec Water Sensor 6 Dock. The Dock is a supplemental tool used to increase the area monitored by the Water Sensor, helping you detect leaks as soon as they appear so you can prevent or reduce water damage to your possessions. The Dock comes with two probes that can monitor two separate surfaces, including floors, up to 1 meter away from the installation location of Dock. The Dock is powered by plugging into a power outlet using the provided USB cable and a common smartphone charger. Placing the Water Sensor 6 on the Dock when the Dock is plugged in powers the Sensor, saving the sensor's batteries from spending energy. The Water Sensor 6's battery will be used as a backup battery in case power is interrupted to the dock. NOTE: Dock for Water Sensor 6 is not waterproof. Install the Dock in a place that will not be exposed to water if a leak or flood appears. SPECIFICATIONS: Manufacturer Part #: ZW160. Warranty: 1 Year.
- UPC: 810667024109
- ASIN: B01FW2D9MG
- Brand: Aeotec
- Manufacturer: Aeotec
Fibaro FGFS-101 ZW3 Flood Sensor Z-Wave 2016 Model, doesn't work with HomeKit, 3.80" x 3.70" x 1.40", White
Fibaro FGFS-101 ZW3 Flood Sensor Z-Wave 2016 Model, doesn't work with HomeKit, 3.80" x 3.70" x 1.40", White
TILT SENSOR Detects tilt and movement over 15 degrees. It will also alert you of any attempt to move or tamper with the device. ALARM SIREN Built in alarm siren will help you react quickly in case of a flood, rapid temperature change, or attempt to tamper with it. TELESCOPIC PROBES Fibaro Flood Sensor is the only one in the World to perfectly work on uneven surfaces thanks to gold telescopic probes, which are flexible enough to compensate for uneven surface levels. IN / OUT Input terminal allows for connecting an external probe and installing the sensor in any location. Output terminal allows for connection to an alarm system. VISUAL INDICATOR LIGHT Aside from the alarm siren, the device can alert you of a threat using color displays from the built in RGB diode. TAMPER PREVENTION Specially designed enclosure contains a tamper button, protecting it from being opened unintentionally. BATTERY POWERED A single battery is enough to power the Sensor for 2. 5 years. TEMPERATURE SENSOR Built in temperature sensor may be used to manage a floor heating system or serve as a fire alarm sensor, by detecting rapid temperature rise. Hard wired Power or battery You can power the Flood Sensor by 12/24 VDC or a battery which will last 2, 5 years The Sensor allows for integration with almost any available wired alarm system on the market. The Sensor allows for sending alarm notifications via wires or wirelessly. Visual Color Display One look is enough to find out what happened, thanks to the colored indicator light. Depending on the Flood Sensor's built-in LED illuminated color, you will know whether the Sensor has detected water, or a decrease / increase in temperature. With its built-in Z-Wave range tester you can easily determine whether the place you chose for the Sensor allows for communicating with the main controller or maybe you will have to use an external wired probe, to ensure the Sensor's proper operation.
- UPC: 857934005140
- ASIN: B00P2PJI6U
- Brand: Fibaro
- Size: 3.80" x 3.70" x 1.40"
- Manufacturer: Fibaro
Samsung SmartThings Water Leak Sensor
Samsung SmartThings Water Leak Sensor
The SmartThings Water Leak Sensor can monitor moisture to send you alerts that could prevent a leak from becoming a flood. It can also monitor temperature.It requires the SmartThings Hub
- UPC: 856418004471
- ASIN: B00MOIYIN6
- Brand: Samsung Electronics
- Manufacturer: SmartThings
HomeSeer HS-LS100+ Z-Wave Plus Leak Sensor | Works With SmartThings
HomeSeer HS-LS100+ Z-Wave Plus Leak Sensor | Works With SmartThings
- UPC: 757347266308
- ASIN: B0786L1DCN
- Brand: HomeSeer
- Manufacturer: HomeSeer
WaterCop Z-Wave Smart Water Shut-Off Valve 1-1/4" Kit (Actuator and 1.25 In Valve) Leak Prevention
WaterCop Z-Wave Smart Water Shut-Off Valve 1-1/4" Kit (Actuator and 1.25 In Valve) Leak Prevention
SPECIFICATIONS:Z-Wave Signal Frequency: 908.42 MHzPower: 12-VDCZ-Wave Range: Up to 100 feet line of sightOperating Temperature: 35-105 FDimensions (actuator): 9.9" x 7.2" x 5.4"Power Cord Length: 20 feetWeight: 4lb 5ozMaximum Working Pressure: 125 PSIGFor Cold Water ApplicationCOMPATIBLE HUBS:Do NOT buy if your controller is not listed below. Contact Seller first.Fibaro Home Center LiteHomeSeerSamsung SmartThings HubVeraEdgeVeraPlusVeraSecureZ-Wave MeZipato ZipaTile
- UPC: 707785603012
- ASIN: B07G7FLMCD
- Brand: WaterCop
- Size: 1-1/4 Inch
- Manufacturer: DynaQuip
Zircon Leak Alert Water Leak Detector & Flood Sensor Alarm / Water Leak Sensor with Dual Leak Alarms 90dB Audio / Battery Powered (5 Pack) Batteries Included
Zircon Leak Alert Water Leak Detector & Flood Sensor Alarm / Water Leak Sensor with Dual Leak Alarms 90dB Audio / Battery Powered (5 Pack) Batteries Included
The Zircon Leak Alert electronic water detector is now available in a 2, 5 or 8 Pack. This Home Pack includes 5 leak detectors to meet the specific needs of your property. Please note batteries are included in the five pack. The Leak Alert is a water sensor that emits a loud (90Db) alarm that will sound with any direct water contact. Protect your property from water damage by placing your Leak Alert in any place that has potential for flooding or leaks such as near water heaters, sinks, dishwashers, sump pumps, and more. The Leak Alert is a water leak sensor and water alarm that requires an easily installed 9V battery. Each water detector alarm is battery operated, wireless and fully automatic so no wiring or hub is required. Just like your smoke detectors, remember to check and replace your Leak Alert batteries every year. Should flooding occur, the water leak detector will float and continue to sound an auditory alarm so it can be heard from a distance. The Leak Alert has a low battery warning for optimum performance. The Leak Alert is the perfect water detector for HOA, multi-unit, and multi-story property managements. It is also the best water detector to protect your apartment, home or office. The Zircon Leak Alert Home Pack allows you to save money and protect your entire property with one purchase.
- UPC: 042186683196
- ASIN: B01J39MJ9I
- Brand: Zircon
- Size: 5 Pack
- Manufacturer: Zircon
Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor
Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor
MultiSensor 6 is the foundation of a modern smart home. Its perfectly small exterior hosts the technology for real-time intelligence. Designed and calibrated to be as accurate as it can be, MultiSensor 6’s accuracy varies as little as ±0.2%. The device measures ultraviolet light and can protect your family's health and your furniture from bleaching. With the newly added vibration sensor, MultiSensor 6 makes your environment secure like never before. MultiSensor 6 is a part of Aeotec Gen5 range of Z-Wave products. That means that it outperforms all that has come before it. It’s built around the latest Z-Wave 500 series chip and firmware, providing a 50% greater wireless range and a 250% faster communication speed over previous Z-Wave products. It has AES 128 bit security encryption built right in. You need a Z-Wave gateway which operates with the 500 series chip products to take full advantage of the device. Please consult the manufacturer of your Z-Wave hub to make sure it supports all MultiSensor 6 features. SPECIFICATIONS: Motion Sensor : 16 feet, and 120° field of view; Humidity Sensor : 20% to 95%, accuracy:+/- 5% at 77°F; Temperature Sensor : 14°F (-10°C) ~ 140°F (60°C), accuracy: +/- 32.9°F (0.5°C); Light Sensor : 0 lux to 1000 lux; Vibration Sensor : acts as tamper switch, ON or OFF; Operation Temperature (Top): -4°F (-20°C) ~ 140°F (40°C); Storing Temperature: -40°F (-40°C) ~ 176°F (80°C); Working Humidity: 8% ~ 80%; Operational site: Indoor and outdoor; Power: DC 5V 500mA or 2 x CR123A battery; Weight: 2.6 oz
- UPC: 810667023201
- ASIN: B0151Z8ZQY
- Brand: Aeon Labs
- Size: Small
- Manufacturer: Aeon Labs LLC