Zircon MetalliScanner m40- Handheld Electronic Metal Detector Use on Dry Wall, Concrete, Lathe and Plaster, Stucco and More, Battery Included
Zircon MetalliScanner m40- Handheld Electronic Metal Detector Use on Dry Wall, Concrete, Lathe and Plaster, Stucco and More, Battery Included
The Zircon MetalliScanner m40 electronic metal scanner quickly and easily detects metal in lath and plaster, wood, drywall, paneling, tile, stucco, plaster, concrete and other non-metallic surfaces. This metal detector locates ferrous (magnetic) metal up to 4 inches (100 mm) deep and non-ferrous (non-magnetic) metal up to 2 inches (50 mm) deep. The Zircon m40 has two scanning positions, Wide Scan and Pinpoint Scan. To get started, install the included 9V alkaline battery. Hold the tool in the air away from any metal but make sure the blue sensor is parallel to the surface being scanned. Press and hold the Power Button to calibrate the unit. Once you hear a beep and see the green "Ready" LED illuminated, calibration is complete. Continue to hold the Power Button as you slowly slide the tool across the surface. As the MetalliScanner approaches a metal object, the red LEDs progressively light from the bottom up in both scanning modes. The top lighted blue coil and an audio tone indicate when a metal target is located. This MetalliScanner m40 tool easily solves the very difficult problem of finding studs in lath and plaster walls. It works as a nail finder by detecting the pattern of nails that attach the wood lath to the studs. Additionally, the MetalliScanner m40 metal locator finds plumbing, ductwork, rebar, nails and screws in your walls, floors and ceilings and is great for scanning reclaimed lumber for hidden metal. Now in easy open packaging, this product comes with everything you need to get started, including the battery! Backed by our world class customer service and support, we at Zircon know that whether you're a Construction Professional or weekend DIY enthusiast, you'll find the m40 has the technology and durability you're looking for to get the job done right.
- UPC: 042186670448
- ASIN: B00ZF8Y6ZW
- Brand: Zircon
- Manufacturer: Zircon
Zircon MultiScanner i520- Center Finding Stud Finder with Metal and Live AC Wire Detection
Zircon MultiScanner i520- Center Finding Stud Finder with Metal and Live AC Wire Detection
The Zircon MultiScanner i520 center finding electronic wall scanner quickly and easily locates studs, detects metal, locates live, unshielded AC wires. Complete with the latest technology in density detecting software and circuitry, as well as an ergonomic body design. Unlike other wall scanners and stud finders, the Zircon i520 stud finder has a 4-mode switch makes it easy to change functions while the ultra-bright LCD screen, SpotLite Pointing System, and audio tone all indicate the location of the target. This Zircon stud finder also comes equipped with a Signal Strength Indicator helps to distinguish between shallow and deep targets. A weak signal can also imply other non-stud objects, like wires and pipes, are present in the area being scanned. The MultiScanner i520 includes ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a low battery indicator to alert its users to replace its battery for optimal performance results. The tool constantly scans its surroundings and recalibrates itself if necessary. In StudScan mode, the Zircon i520 locates the center, edges, and direction of wood or metal studs up to 3/4 (19 mm) of an inch deep. Switch the i520 stud finder over to DeepScan mode and double the scanning depth to 1.5 inches (38 mm) deep and enables scanning for joists in some ceilings and floors. Metal Scan mode of the MS i520 provides the ability to locate non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Using Metal Scan mode, this Zircon studsensor can find studs behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. Additionally, the MultiScanner i520 is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using the st... [Read More]
- UPC: 042186683141
- ASIN: B01J39MJEI
- Brand: Zircon
- Size: Standard
- Manufacturer: Zircon
Zircon MultiScanner x85 Center Finding Stud Finder, Thermal Scanner and Live AC Wire Detector
Zircon MultiScanner x85 Center Finding Stud Finder, Thermal Scanner and Live AC Wire Detector
The Zircon MultiScanner x85 is a one of a kind wall scanner with its patented ergonomic pivot pinch grip and the latest in density detecting software. The MS x85 thermally detects and allows the user to map water-filled hydronic radiant heating, scans for live unshielded AC wiring, and locates the edges and center of wood and metal studs. The center Mode Button makes it easy to change functions while the backlit LCD screen, arrow shaped SpotLite Pointer, and audio tone all indicate the location of the target. The Signal Strength Indicator helps to distinguish between shallow and deep targets. The MultiScanner x85 also includes ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a low battery indicator to alert its users to replace its batteries for optimal performance results. Keep in mind that the tool’s LCD screen and internal technology requires a fully charged battery to run optimally. The MSx85 acts as a stud finder in two of its four modes. In StudScan mode, the multifunctional x85 locates the center, edges, and direction of wood or metal studs up to 3/4 of an inch (19 mm) deep. Press the Mode Button twice to switch to DeepScan mode and double the scanning depth to 1.5 inches (38 mm). Additionally, the MS x85 is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using both stud scan modes. To detect, locate, map, and trace the live wires, simply press the Mode Button twice more to shift to the AC Scan function which finds and traces live, unshielded AC wiring up to 2 inches (50 mm) deep. Pressing the Mode Button two more times will set the MultiScanner x85 in Thermal Scan mode. In this mode, the x85 thermally detects the center of actively heated water-filled ½ inch (13 mm) diameter plastic pipes up to 2 in. (50 mm) deep. This feature is perfect to detect, locate, map, and trace r... [Read More]
- UPC: 042186681741
- ASIN: B01J39MNZ8
- Brand: Zircon
- Size: full size
- Manufacturer: Zircon
Little Wizard 2 Woodworking Metal Detector
Little Wizard 2 Woodworking Metal Detector
The Most Economical Portable Metal Detector Available The Little Wizard is a precision hand held metal detector designed especially for woodworkers. Perfect for scanning recycled wood for screws and nails before planing, routing, sanding or sawing, and other forms of metal detection. The Little Wizard accurately indicates metal buried inside recycled wood by emitting a high pitch beep tone and illuminating an array of LED's. The Little Wizard can pinpoint the exact location of metal. No guessing, extensive physical searching or unnecessary visual searching is needed with the Little Wizard. The Little Wizard is widely used by woodworkers everywhere. It's small size and unique detection strength allow it to be used to quickly detect damaging nails, screws and other dangerous metal buried inside of wood. The Little Wizards adjustable sensitivity makes pinpointing easy and accurate. The Little Wizard precisely indicates metal by emitting a high pitch beep tone and illuminating an array of LED's. There's simply no better economical, portable metal detector made. ******Does not detect lead shot (sorry hunters). But it will save your blades and knives. *****
- UPC: 721633114512
- ASIN: B0093FJENM
- Brand: Wizard Distribution
- Manufacturer: Wizard Industries
Stud Finder, 3 in 1 Multi-Function Wall Stud Sensor Detector with LCD Display and Sound Warning for AC Live Wire, Wood, Metal, Deep Scanning Kuled M79
Stud Finder, 3 in 1 Multi-Function Wall Stud Sensor Detector with LCD Display and Sound Warning for AC Live Wire, Wood, Metal, Deep Scanning Kuled M79
KULED Stud Finder is a easy-to-use, also a necessary tool that quickly and easily locates the edges of wood and metal studs and joists behind walls, floors, and ceilings etc. This stud finder operates by slowly slide device horizontally across wall, right of left. When full bars appears on the LCD and steady tone sounds, you have located the edge of the stud.Features:- STUD mode: detect metal and wood studs up to 0.71 inches (18mm) .- METAL mode: detect metal pipes ,rebars etc up to 3 inches (76mm) .- DEEP mode: detects wooden beams ,metal rebars up to 1.25 inches (32mm) .- AC mode: detects AC live wire up to 3 inches (76mm) . Select AC scan mode to determine position of hot wires. Begin by placing the scanner at some position away from hot wiring.- Auto power off after about 1 minutes of non-use.- Low battery indicator- Auto calibration all functions detection- Battery :1x9V battery（include）How to use 1: Press ON/OFF button to power on the device, and press RIGHT button to choose the scanning mode you want to detect. Listen "beep"to confirm the mode button effective.2: Place the device flat on wall first. Then press and hold the button at the left side of the device , and keep the unit still until the unit sound a short beep twice and the display bars will be cleared .3: While still holding on the button ,move the stud finder on the desired surface to scan and detect for studs, metal beams, rebars, pipes ,AC wire etc .you can scan the object from left to right.4 : When the device detected an object , it will beep continually and a peck shape will also display on the LCD screen .Battery installation1.Open battery door on back of case.2.Connect a 9-volt battery to battery clip.3.Insert battery into case and replace battery door.Package Contents1 x Stud Finder1 x 9V battery (included)1 x User Manual
- UPC: 795971430801
- ASIN: B075P1THYY
- Brand: Kuled
- Manufacturer: Kuled
Stud Finder Wall Scanner - 4 in 1 Electric Multi Function Wall Detector Finders with Digital LCD Display, Center Finding Stud Sensor & Sound Warning for Studs/Wood/Metal/Live AC Wires Detection
Stud Finder Wall Scanner - 4 in 1 Electric Multi Function Wall Detector Finders with Digital LCD Display, Center Finding Stud Sensor & Sound Warning for Studs/Wood/Metal/Live AC Wires Detection
A good stud finder can be the difference between a successful DIY home project and disaster. When hammering or screwing things into walls, ceilings, and floors, you need to know what is on the other side. Otherwise, you might damage drywall or flooring with unsupported items you are trying to install. That is why a stud finder is important. This VIVREAL stud sensor wall scanner includes a backlit LCD graphic screen for low-light conditions and auto-calibration that makes setup a whole lot easier. Electronic Wall Scanner has 4 modes to choose, Stud scan: Locates the center and edges of wood and metal studs up to 3⁄4 in. (19 mm) deep. Deep mode: Locates the center and edges of wood and metal studs up to 11⁄2 in. (38 mm) deep. Metal scan: Detects metal (such as 1⁄2 inch rebar) up to 2.36 in. (60 mm) deep. AC scan: Detects live unshielded AC wires up to 2 in. (51 mm) deep. How to use VIVREAL stud finder? Step 1: Press the button at the left side of device to power it. Step 2: Slide the button on the middle of device to select one scanning mode. Step 3: Place the device flat on the scanning surface. Then press and move it in a stable way. (Note: if you cannot scan the object from left to right, please try to scan up and down.) Step 4: When the objected is found, the device will beep continually and a peck type will appear on the LCD display. Mark it with a pencil. VIVREAL stud sensor has a beep alarm sound to tell you the "center states". The directional indicators and the "center" signal keep users identifying the exact center of the stud, like arrow and edge on Electronic Wall Scanner LCD screen. If you are a DIY home projector or professional contractor, VIVREAL stud finder is what you are looking for.
- UPC: 785004878069
- ASIN: B07B9VKWSL
- Brand: VIVREAL
- Size: Small
- Manufacturer: VIVREAL
Stud Finder Sensor Wall Scanner - 4 in 1 Electronic Stud Sensor Beam Finders Wall Detector Center Finding with LCD Display for Wood AC Wire Metal Studs Joist Detection
Stud Finder Sensor Wall Scanner - 4 in 1 Electronic Stud Sensor Beam Finders Wall Detector Center Finding with LCD Display for Wood AC Wire Metal Studs Joist Detection
Whether you're hanging a picture,mounting a TV,renovating part of your home, or working as a professional contractor, you need to know what is on the other side .Tavool stud finder is one of those tools that you will eventually need. Tavool stud finder can be the difference between a successful DIY home project and disaster. ➤Tavool stud beam finder is a device that is used to determine exact location of framing studs that are located behind the drywall. This Multi-scanner stud finder uses electronic signals to quickly locate edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings. ➤The wall detector features large LCD display, ergonomic design and multi-sense technology for accurate detection of both metal and wooden studs. It will also detect live wiring up to two inches into walls. The four scanning modes (stud scan, deep scan, metal scan and AC scan) make it ideal for both tradesmen and home carpenters. With this device, you can immediately find a suitable place on the wall without making any extra holes The cost of a stud finder wall scanner will almost always be less than the cost of repairing the damage done from not locating one before hanging something. ➤Nabini stud finder has changed the brand to "Tavool".ADD TO CART AND START YOUR PROJECT SAFE! How to use an electronic stud finder detector? Step 1: Install the 9v battery (not included in the package) & choose the mode. Step 2: Place the device flat on the wall. Then press and hold the button while keeping the unit still until calibration is complete (1-2 seconds). When calibration is complete, the unit will sound a short beep and the display bars will be cleared. Step 3: While holding on the button, move it along the desired surface to scan. Step 4 : When the stud finder detects an object, it will beep continually and will display on the LCD screen.
- ASIN: B07F6RZM43
- Brand: Tavool
- Size: Small
- Manufacturer: Tavool
Zircon Stud Finder DIY/Pro StudSensor A100 Wall Scanner; StudScan Detects Edges of Wood/Metal Studs at 3/4" DeepScan Detects Wood/Metal to 1 1/2" Alerts Presence of Live, Unshielded AC Wire US Model
Zircon Stud Finder DIY/Pro StudSensor A100 Wall Scanner; StudScan Detects Edges of Wood/Metal Studs at 3/4" DeepScan Detects Wood/Metal to 1 1/2" Alerts Presence of Live, Unshielded AC Wire US Model
The StudSensor A100 is Zircon’s newest edge locating electronic stud finder that is sold exclusively on Amazon. The A100 is designed with a smooth, ergonomic rubber grip allowing for a comfortable yet secure hold for any size hand, at any angle. This stud finder uses the most recent technology in density detecting software and circuitry. The scanner has 2 scanning modes to locate the edges of wood and metal studs and joists behind walls, floors, and in ceilings up to 1.5 inches (38 mm) deep. In StudScan Mode, the SS A100 locates the edges of shallower wood or metal studs up to 0.75 of an inch (19 mm) deep. Switch over to DeepScan Mode to double the scanning depth to 1.5 inches (38 mm). This stud sensor is programmed with a Wire Warning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using either stud scanning modes. Finding studs using this edge finding tool is simple. To get started, install one brand new 9V alkaline battery (not included). Place the unit flat against the wall and press the Power Button to calibrate the sensor. Once you hear a beep indicating calibration is complete, continue to hold the Power Button and slowly slide the tool across the surface. The easy-to-read LCD will alert you as the stud detector approaches the edge of the stud in both scanning modes. Once the edge is detected, the patented arrow-shaped SpotLite Pointer will shine, the translucent base will illuminate, and an audio tone will sound. DO NOT DRILL HERE! Instead, mark the spot in the “V’ marker groove at the head of the tool and continue past the stud. Repeat the process in the opposite direction and mark the opposite edge of the stud. The center of the stud is midway between the two marks. Make sure to note whether the Wire Warning Detection is alerting you to live, unshielded AC wiring before drilling between the two marks into the center of the stud. With the Zircon StudSensor A100, you can safely maneuver... [Read More]
- UPC: 042186693317
- ASIN: B079PVXMF7
- Brand: Zircon
- Size: Edge Finding
- Manufacturer: Zircon
Zircon MetalliScanner MT6-Professional Metal Detector Map the Grid and Use on Concrete, Drywall, Lathe and Plaster, Stucco, and More - Protective Case and Battery Included
Zircon MetalliScanner MT6-Professional Metal Detector Map the Grid and Use on Concrete, Drywall, Lathe and Plaster, Stucco, and More - Protective Case and Battery Included
The Zircon MetalliScanner MT 6 electronic metal scanner locates and differentiates between ferrous metal (such as rebar) and non-ferrous metal (such as copper pipe) up to 6 inches (150 mm) deep in solid concrete and other non-metallic surfaces. Use the Zircon MT 6 to locate embedded metal before your drill bit or saw blade does. Find or avoid rebar, cables, pipe, hidden nails in reclaimed lumber, nails/tacks in studs behind lath & plaster walls, electrical boxes, conduit and more. This metal locator can act as a rebar detector to help map out the grid of metal through any nonmetallic construction material, including concrete, tile, stucco, paneling, drywall, plaster, and marble. This powerful metal detector also indicates the target depth in inches and centimeters. When the plus becomes a minus (-), you have crossed over the target and are now moving away. The Zircon MT6 comes complete with a protective aluminum case and a 9V battery. To get started, install the 9V battery and turn on the unit away from the surface being scanned. Note that the tool performs a calibration as soon as it is powered on. It is best to “pre-scan” the area first to get a general since of what will be detected. Place the unit on the scanning surface and move from side to side. The easy to read LCD screen indicates when you are approaching a metal object with a large plus (+) sign on the display. Then press the “Press to Recalibrate” button and repeat the procedure noting the depths of the items being detected. The MT 6 is now delivered to you in our Amazon exclusive easy to open packaging. Backed by our world class customer service and support, we at Zircon know that whether you're a Construction Professional or weekend DIY enthusiast, you'll find the Zircon MT 6 has the technology and durability you're looking for to get the job done right.
- UPC: 042186640533
- ASIN: B004BG5W34
- Brand: Zircon
- Manufacturer: Zircon
Stud Finder Wall Scanner - 4 in 1 Electronic Stud Sensor Wall Detector Wood Beam Finders Center Finding with Battery and LCD Display for Wood AC Wire Metal Studs Detection (Black)
Stud Finder Wall Scanner - 4 in 1 Electronic Stud Sensor Wall Detector Wood Beam Finders Center Finding with Battery and LCD Display for Wood AC Wire Metal Studs Detection (Black)
Whether you're hanging a picture,mounting a TV,renovating part of your home, or working as a professional contractor, you need to know what is on the other side . Tavool stud finder is one of those tools that you will eventually need. Tavool stud finder can be the difference between a successful DIY home project and disaster. ➤Tavool stud finder is a device that is used to determine exact location of framing studs that are located behind the drywall. This Multi-scanner stud finder uses electronic signals to quickly locate edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings. ➤The stud finder wall detector features large LCD display, ergonomic design and multi-sense technology for accurate detection of both metal and wooden studs. It will also detect live wiring up to two inches into walls. The four scanning modes (stud scan, deep scan, metal scan and AC scan) make it ideal for both tradesmen and home carpenters. With this device, you can immediately find a suitable place on the wall without making any extra holes The cost of a stud finder wall scanner will almost always be less than the cost of repairing the damage done from not locating one before hanging something. ➤Nabini stud finder has changed the brand to "Tavool".ADD TO CART AND START YOUR PROJECT SAFE! How to use an electronic stud finder detector? Step 1: Power on the device and choose the scanning mode. Step 2: Place the device flat on the wall. Then press and hold the button while keeping the unit still until calibration is complete (1-2 seconds). When calibration is complete, the unit will sound a short beep and the display bars will be cleared. Step 3: While holding on the button, move it along the desired surface to scan. Step 4 : When the stud finder detects an object, it will beep continually and will display on the LCD screen (if available).
- ASIN: B07HF92JMR
- Brand: Tavool
- Size: Stud finder with battery
- Manufacturer: Tavool