Zircon MetalliScanner MT6-Professional Metal Detector Map the Grid and Use on Concrete, Drywall, Lathe and Plaster, Stucco, and More - Protective Case and Battery Included

Zircon MetalliScanner MT6-Professional Metal Detector Map the Grid and Use on Concrete, Drywall, Lathe and Plaster, Stucco, and More - Protective Case and Battery Included

The Zircon MetalliScanner MT 6 electronic metal scanner locates and differentiates between ferrous metal (such as rebar) and non-ferrous metal (such as copper pipe) up to 6 inches (150 mm) deep in solid concrete and other non-metallic surfaces. Use the Zircon MT 6 to locate embedded metal before your drill bit or saw blade does. Find or avoid rebar, cables, pipe, hidden nails in reclaimed lumber, nails/tacks in studs behind lath & plaster walls, electrical boxes, conduit and more. This metal locator can act as a rebar detector to help map out the grid of metal through any nonmetallic construction material, including concrete, tile, stucco, paneling, drywall, plaster, and marble. This powerful metal detector also indicates the target depth in inches and centimeters. When the plus becomes a minus (-), you have crossed over the target and are now moving away. The Zircon MT6 comes complete with a protective aluminum case and a 9V battery. To get started, install the 9V battery and turn on the unit away from the surface being scanned. Note that the tool performs a calibration as soon as it is powered on. It is best to “pre-scan” the area first to get a general since of what will be detected. Place the unit on the scanning surface and move from side to side. The easy to read LCD screen indicates when you are approaching a metal object with a large plus (+) sign on the display. Then press the “Press to Recalibrate” button and repeat the procedure noting the depths of the items being detected. The MT 6 is now delivered to you in our Amazon exclusive easy to open packaging. Backed by our world class customer service and support, we at Zircon know that whether you're a Construction Professional or weekend DIY enthusiast, you'll find the Zircon MT 6 has the technology and durability you're looking for to get the job done right.

  • UPC: 042186640533
  • ASIN: B004BG5W34
  • Brand: Zircon
  • Manufacturer: Zircon

Zircon MultiScanner 740 Electronic Wall Scanner with Built-In Erasable Wall Marker/Center Finding and Edge Finding Stud Finder/Metal Detector/Live AC Wire Detection

Zircon MultiScanner 740 Electronic Wall Scanner with Built-In Erasable Wall Marker/Center Finding and Edge Finding Stud Finder/Metal Detector/Live AC Wire Detection

The Zircon MultiScanner 740 center finding electronic wall scanner quickly and easily locates studs, detects metal, locates live, unshielded AC wires and allows you to mark your target. Complete with the latest technology in density detecting software and circuitry, an ergonomic body design, and an erasable marking system. Unlike other wall sensors, scanners and stud finders, the MS 740 is uniquely designed with a "floating head" that keeps the scanning surface level on textured or rough surfaces so results are more accurate. The 4-mode switch makes it easy to change functions while the ultra-bright display screen, dual SpotLite Pointing System, and audio tone all indicate the location of the target. The Signal Strength Indicator helps to distinguish between shallow and deep targets. The MultiScanner 740 also includes ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a low battery indicator to alert its users to replace its battery for optimal performance results. In StudScan mode, the multifunctional 740 locates the center, edges, and direction of wood or metal studs up to 3/4 of an inch (19 mm) deep. Switch over to DeepScan mode and double the scanning depth to 1.5 inches (38 mm). Metal Scan mode of the MS740 provides the ability to locate non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Using Metal Scan mode, studs can be found behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. Additionally, the MS 740 is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using the stud and metal scan modes. To detect, locate, map, and trace the live wires, simply switch over to the AC Scan function which finds and traces live, unshi... [Read More]

  • UPC: 042186673258
  • ASIN: B01AHYDWNK
  • Brand: Zircon
  • Size: Integrated Wall Marker
  • Manufacturer: Zircon

Zircon MetalliScanner m40- Handheld Electronic Metal Detector Use on Dry Wall, Concrete, Lathe and Plaster, Stucco and More, Battery Included

Zircon MetalliScanner m40- Handheld Electronic Metal Detector Use on Dry Wall, Concrete, Lathe and Plaster, Stucco and More, Battery Included

The Zircon MetalliScanner m40 electronic metal scanner quickly and easily detects metal in lath and plaster, wood, drywall, paneling, tile, stucco, plaster, concrete and other non-metallic surfaces. This metal detector locates ferrous (magnetic) metal up to 4 inches (100 mm) deep and non-ferrous (non-magnetic) metal up to 2 inches (50 mm) deep. The Zircon m40 has two scanning positions, Wide Scan and Pinpoint Scan. To get started, install the included 9V alkaline battery. Hold the tool in the air away from any metal but make sure the blue sensor is parallel to the surface being scanned. Press and hold the Power Button to calibrate the unit. Once you hear a beep and see the green "Ready" LED illuminated, calibration is complete. Continue to hold the Power Button as you slowly slide the tool across the surface. As the MetalliScanner approaches a metal object, the red LEDs progressively light from the bottom up in both scanning modes. The top lighted blue coil and an audio tone indicate when a metal target is located. This MetalliScanner m40 tool easily solves the very difficult problem of finding studs in lath and plaster walls. It works as a nail finder by detecting the pattern of nails that attach the wood lath to the studs. Additionally, the MetalliScanner m40 metal locator finds plumbing, ductwork, rebar, nails and screws in your walls, floors and ceilings and is great for scanning reclaimed lumber for hidden metal. Now in easy open packaging, this product comes with everything you need to get started, including the battery! Backed by our world class customer service and support, we at Zircon know that whether you're a Construction Professional or weekend DIY enthusiast, you'll find the m40 has the technology and durability you're looking for to get the job done right.

  • UPC: 042186670448
  • ASIN: B00ZF8Y6ZW
  • Brand: Zircon
  • Manufacturer: Zircon

Zircon StudSensor e50 Electronic Wall Scanner / Edge Finding Stud Finder / Live AC WireWarning Detection

Zircon StudSensor e50 Electronic Wall Scanner / Edge Finding Stud Finder / Live AC WireWarning Detection

The Zircon StudSensor e50 is an electronic edge finding stud finder. The e50's body design reduces normal scanning errors and can be comfortably held in either hand at any angle while the rubber over molded grip also provides a secure hold. The SS e50 easily locates the edges of wood and metal studs and joists behind walls, floors, and in ceilings with just one pass. In StudScan mode, the SSe50 locates the edges of shallower wood or metal studs up to 3/4 of an inch (19 mm) deep. Switch over to DeepScan mode to double the scanning depth to 1.5 inches (38 mm). This stud sensor is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using both stud scan modes. Finding studs using this edge finding tool is simple. To get started, install one brand new 9V alkaline battery (not included). Place the unit flat against the wall and press the Power Button to calibrate the sensor. Once you hear a beep indicating calibration is complete, continue to hold the Power Button and slowly slide the tool across the surface. The easy-to-read LCD will alert you as the stud detector approaches the edge of the stud in both scanning modes. Once the edge is detected, an arrow-shaped SpotLite Pointer will illuminate and an audio tone will sound. DO NOT DRILL HERE! Instead, mark the spot and continue past the stud. Repeat the process in the opposite direction and mark the opposite edge of the stud. The center of the stud is midway between the two marks. Make sure to note whether the WireWarning Detection is alerting to live, unshielded AC wiring before drilling between the two marks into the center of the stud. With the Zircon StudSensor e50, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.

  • UPC: 042186682779
  • ASIN: B01HTFHOEI
  • Brand: Zircon
  • Size: Edge Finding
  • Manufacturer: Zircon

Zircon Stud Finder DIY/Pro StudSensor A150 Wall Scanner; StudScan / DeepScan Modes Detect Edges and Center of Wood / Metal Studs to 1 ½" Alerts Presence of Live, Unshielded AC US Model

Zircon Stud Finder DIY/Pro StudSensor A150 Wall Scanner; StudScan / DeepScan Modes Detect Edges and Center of Wood / Metal Studs to 1 ½" Alerts Presence of Live, Unshielded AC US Model

The StudSensor A150 is Zircon’s newest center locating electronic stud finder that is sold exclusively on Amazon. The A150 is designed with a smooth, ergonomic rubber grip allowing for a comfortable yet secure hold for any size hand, at any angle. This stud finder uses the most recent technology in density detecting software and circuitry. The scanner has 2 scanning modes to locate the center and edges of wood and metal studs and joists behind walls, floors, and in ceilings up to 1.5 inches (38 mm) deep. In StudScan Mode, the SS A150 locates the center and edges of shallower wood or metal studs up to 0.75 of an inch (19 mm) deep. Switch over to DeepScan Mode to double the scanning depth to 1.5 inches (38 mm). This stud sensor is programmed with a Wire Warning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using either stud scanning modes. Finding studs using this center and edge finding tool is simple. To get started, install one brand new 9V alkaline battery (not included). Place the unit flat against the wall and press the Power Button to calibrate the sensor. Once you hear a beep indicating calibration is complete, continue to hold the Power Button and slowly slide the tool across the surface. The Signal Strength Bars will appear on the LCD screen when a stud is detected. As the stud finder detects the edge of a stud, “EDGE” will appear in the LCD screen. Continue to slide the tool along the wall until you hear an audio tone and see both the patented arrow-shaped SpotLite Pointer as well as “CENTER” on the LCD. These signs indicate the center of the stud has been found. Make sure to note whether the Wire Warning Detection is alerting you to live, unshielded AC wiring before drilling into the center of the stud. With the Zircon StudSensor A150, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.

  • UPC: 042186693324
  • ASIN: B079PYX9NJ
  • Brand: Zircon
  • Size: Center Finding
  • Manufacturer: Zircon

Zircon MultiScanner i520- Center Finding Stud Finder with Metal and Live AC Wire Detection

Zircon MultiScanner i520- Center Finding Stud Finder with Metal and Live AC Wire Detection

The Zircon MultiScanner i520 center finding electronic wall scanner quickly and easily locates studs, detects metal, locates live, unshielded AC wires. Complete with the latest technology in density detecting software and circuitry, as well as an ergonomic body design. Unlike other wall scanners and stud finders, the Zircon i520 stud finder has a 4-mode switch makes it easy to change functions while the ultra-bright LCD screen, SpotLite Pointing System, and audio tone all indicate the location of the target. This Zircon stud finder also comes equipped with a Signal Strength Indicator helps to distinguish between shallow and deep targets. A weak signal can also imply other non-stud objects, like wires and pipes, are present in the area being scanned. The MultiScanner i520 includes ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a low battery indicator to alert its users to replace its battery for optimal performance results. The tool constantly scans its surroundings and recalibrates itself if necessary. In StudScan mode, the Zircon i520 locates the center, edges, and direction of wood or metal studs up to 3/4 (19 mm) of an inch deep. Switch the i520 stud finder over to DeepScan mode and double the scanning depth to 1.5 inches (38 mm) deep and enables scanning for joists in some ceilings and floors. Metal Scan mode of the MS i520 provides the ability to locate non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Using Metal Scan mode, this Zircon studsensor can find studs behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. Additionally, the MultiScanner i520 is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using the st... [Read More]

  • UPC: 042186683141
  • ASIN: B01J39MJEI
  • Brand: Zircon
  • Size: Standard
  • Manufacturer: Zircon

Bosch Digital Multi-Scanner GMS120

Bosch Digital Multi-Scanner GMS120

  • UPC: 043913799838
  • ASIN: B004TACMZ8
  • Brand: Bosch
  • Size: Pack of 1
  • Manufacturer: Bosch

Diamond Ear Crawler Zircon Leaf Earrings 925 Sterling Silver Ear Crawler Studs Cuff (Platinum Plating)

Diamond Ear Crawler Zircon Leaf Earrings 925 Sterling Silver Ear Crawler Studs Cuff (Platinum Plating)

Description 925 sterling silver, with a high-grade plating to protect from tarnishing, meanwhile this earings is crafted with high quality zircon to flatter the ears and show off your sophisticated sense of style. Makes this earings the perfect gift for weddings, anniversaries, valentines day, christmas or just because you're thinking of "someone special". Package Including 1 pair x Earrings

  • UPC: 778778945525
  • ASIN: B07RLJZZXY
  • Brand: Kaever
  • Manufacturer: Kaever

Stud Finder Sensor Wall Scanner - 4 in 1 Electronic Stud Sensor Beam Finders Wall Detector Center Finding with LCD Display for Wood AC Wire Metal Studs Joist Detection

Stud Finder Sensor Wall Scanner - 4 in 1 Electronic Stud Sensor Beam Finders Wall Detector Center Finding with LCD Display for Wood AC Wire Metal Studs Joist Detection

Whether you're hanging a picture,mounting a TV,renovating part of your home, or working as a professional contractor, you need to know what is on the other side .Tavool stud finder is one of those tools that you will eventually need. Tavool stud finder can be the difference between a successful DIY home project and disaster. ➤Tavool stud beam finder is a device that is used to determine exact location of framing studs that are located behind the drywall. This Multi-scanner stud finder uses electronic signals to quickly locate edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings. ➤The wall detector features large LCD display, ergonomic design and multi-sense technology for accurate detection of both metal and wooden studs. It will also detect live wiring up to two inches into walls. The four scanning modes (stud scan, deep scan, metal scan and AC scan) make it ideal for both tradesmen and home carpenters. With this device, you can immediately find a suitable place on the wall without making any extra holes The cost of a stud finder wall scanner will almost always be less than the cost of repairing the damage done from not locating one before hanging something. ➤Nabini stud finder has changed the brand to "Tavool".ADD TO CART AND START YOUR PROJECT SAFE! How to use an electronic stud finder detector? Step 1: Install the 9v battery (not included in the package) & choose the mode. Step 2: Place the device flat on the wall. Then press and hold the button while keeping the unit still until calibration is complete (1-2 seconds). When calibration is complete, the unit will sound a short beep and the display bars will be cleared. Step 3: While holding on the button, move it along the desired surface to scan. Step 4 : When the stud finder detects an object, it will beep continually and will display on the LCD screen.

  • ASIN: B07F6RZM43
  • Brand: Tavool
  • Size: Small
  • Manufacturer: Tavool

Stud Finder Wall Scanner - 4 in 1 Electric Multi Function Wall Detector Finders with Digital LCD Display, Center Finding Stud Sensor & Sound Warning for Studs/Wood/Metal/Live AC Wires Detection

Stud Finder Wall Scanner - 4 in 1 Electric Multi Function Wall Detector Finders with Digital LCD Display, Center Finding Stud Sensor & Sound Warning for Studs/Wood/Metal/Live AC Wires Detection

A good stud finder can be the difference between a successful DIY home project and disaster. When hammering or screwing things into walls, ceilings, and floors, you need to know what is on the other side. Otherwise, you might damage drywall or flooring with unsupported items you are trying to install. That is why a stud finder is important. This VIVREAL stud sensor wall scanner includes a backlit LCD graphic screen for low-light conditions and auto-calibration that makes setup a whole lot easier. Electronic Wall Scanner has 4 modes to choose, Stud scan: Locates the center and edges of wood and metal studs up to 3⁄4 in. (19 mm) deep. Deep mode: Locates the center and edges of wood and metal studs up to 11⁄2 in. (38 mm) deep. Metal scan: Detects metal (such as 1⁄2 inch rebar) up to 2.36 in. (60 mm) deep. AC scan: Detects live unshielded AC wires up to 2 in. (51 mm) deep. How to use VIVREAL stud finder? Step 1: Press the button at the left side of device to power it. Step 2: Slide the button on the middle of device to select one scanning mode. Step 3: Place the device flat on the scanning surface. Then press and move it in a stable way. (Note: if you cannot scan the object from left to right, please try to scan up and down.) Step 4: When the objected is found, the device will beep continually and a peck type will appear on the LCD display. Mark it with a pencil. VIVREAL stud sensor has a beep alarm sound to tell you the "center states". The directional indicators and the "center" signal keep users identifying the exact center of the stud, like arrow and edge on Electronic Wall Scanner LCD screen. If you are a DIY home projector or professional contractor, VIVREAL stud finder is what you are looking for.

  • UPC: 785004878069
  • ASIN: B07B9VKWSL
  • Brand: VIVREAL
  • Size: Stud Finder
  • Manufacturer: VIVREAL