Replacement Sensor, O2, Use with MX6

Replacement Sensor, O2, Use with MX6

Replacement Sensor, Detects Oxygen, Chemical Formula O2, Sensor Range 0 to 30 Percent Vol, Resolution 0.1 Percent, Temp. Range -4 Degrees to 131 Degrees F, For Use With Mfr. No. MX6

  • UPC: 094704335551
  • ASIN: B007IAJQHI
  • Brand: Industrial Scientific
  • Manufacturer: INDUSTRIAL SCIENTIFIC

Replacement Oxygen (O2) Sensor for The Industrial Scientific M40

Replacement Oxygen (O2) Sensor for The Industrial Scientific M40

Replacement Oxygen (O2) sensor for the Industrial Scientific M40. Sensor is a compatible version and is produced by Alphasense. ISC PN: 17117730

  • ASIN: B07G2LCDLP
  • Brand: Alphasense
  • Manufacturer: Alphasense

Quincy Lab 10GC Aluminized Steel Bi-Metal Gravity Convection Oven, 0.7 Cubic feet

Quincy Lab 10GC Aluminized Steel Bi-Metal Gravity Convection Oven, 0.7 Cubic feet

Quincy Lab 10GC Aluminized Steel Bi-Metal Gravity Convection Oven, 0.7 cubic feet

  • ASIN: B00UHCFA2Y
  • Brand: Quincy Lab
  • Manufacturer: Quincy Lab

Thomas Traceable Kangaroo Thermometer, 7.5" Probe Length, -58 to 572 degree F, -50 to 300 degree C

Thomas Traceable Kangaroo Thermometer, 7.5" Probe Length, -58 to 572 degree F, -50 to 300 degree C

The Thomas Traceable Kangaroo thermometer is a dual-range digital thermometer used for measuring temperature in test-tubes, beakers, and other laboratory equipment. The thermometer measures temperature from -50 to 300 degrees C (-58 to 572 degrees F), with an accuracy of + or - 1 degree C between -30 and 250 degrees C. The 7.5"stainless-steel probe has a diameter of 0.125" and is resistant to most chemicals. It is attached to the base by a 42" cable. The unit has a built-in compartment to hold the cable when not in use. The LCD display has 0.75"-high digits for increased visibility. A built-in stand is included for hands-free viewing. The thermometer is traceable to National Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. This Thomas thermometer is used to measure temperature in scientific laboratories.SpecificationsTemperature range /TD>-50 to 300 degrees C (-58 to 572 degrees F)Accuracy between -30 and 250 C+ or - 1 degree CAccuracy below -30 and above 250 C+ or - 2 degrees CResolution0.1 degree C (from -19.9 to 199.9 degrees C), 1 degree outside this rangeStandard metInternational Organization for Standardization (ISO) 17025Weight2.75oz.Dimensions (H x W x D)4.75 x 2.5 x 0.5 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A microcontroller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is display... [Read More]

  • ASIN: B006H8M24G
  • Brand: Thomas
  • Manufacturer: Thomas Scientific

Industrial Scientific - 17124975-K - Replacement Sensor, LEL, Use With MX6

Industrial Scientific - 17124975-K - Replacement Sensor, LEL, Use With MX6

MX6 iBrid Multigas Detectors and Confined-Space KitsInclude desktop charger, belt clip, carrying case, and calibration cup with tubing. 5-way scrolling navigation button DS2 Docking Station compatible Full-color LCD Replacement Sensor, LEL, Use With MX6

  • ASIN: B007IAJR8G
  • Brand: Industrial Scientific
  • Size: Standard
  • Manufacturer: Industrial Scientific Corporation

Replacement Oxygen Sensor for Industrial Scientific M40

Replacement Oxygen Sensor for Industrial Scientific M40

Replacement Oxygen (O2) sensor for the Industrial Scientific M40. Sensor is a compatible version and is produced by Alphasense

  • ASIN: B07G2N9NJ1
  • Brand: Alphasense
  • Manufacturer: Alphasense

4 Pack 150ml Syringes, Large Plastic Garden Industrial Syringes for Scientific Labs, Measuring, Watering, Refilling, Filtration Multiple Uses

4 Pack 150ml Syringes, Large Plastic Garden Industrial Syringes for Scientific Labs, Measuring, Watering, Refilling, Filtration Multiple Uses

Specifications: Material: rigid plastic Push rod: polypropylene Capacity: 150ml / 150cc Glue plug: latex Tube diameter: 1.65 inch/ 4.2 cm Whole length: 8.27 inch/ 21 cm Package Includes: 4 Plastic Syringes 150ml Note: The needle is not included in the package. These syringes are for industrial use only.

  • UPC: 710051884756
  • ASIN: B07765R31K
  • Brand: A AKRAF
  • Size: 4 Pack
  • Manufacturer: AKRAF

T40 Rattler Portable H2S Monitor w/alarm, Hydrogen Sulfide Gas Monitor

T40 Rattler Portable H2S Monitor w/alarm, Hydrogen Sulfide Gas Monitor

Industrial Scientific T40 Rattler Portable Hydrogen Sulfide Monitor With Alarms @ 10/20 PPM. The T40 Rattler is a low-cost, maintenance-free single gas monitor designed to protect personnel from dangerous hydrogen sulfide gas exposure in the most extreme conditions. Despite its compact size, the T40 Rattler includes features usually found only in larger multi-gas monitors including a large, liquid crystal display (LCD), internal vibrating alarm, audible/visual alarms and simple push-button operation. The monitor continuously displays ambient hydrogen sulfide readings in PPM & will alert the user when gas concentrations exceed the preset low or high levels. Adjustable alarm setpoints, calibration gas values, choice of text-only display selected by the user. Also has a peak/hold feature to show the highest reading during a shift & includes a flip-cap calibration adapter.

  • ASIN: B00I4EL43Q
  • Manufacturer: Industrial Scientific

Industrial Scientific 1810-9155 Equivalent Calibration Gas: 25% LEL Pentane, 18% Oxygen, 100 ppm Carbon Monoxide, 25 ppm Hydrogen Sulfide, Balance Nitrogen

Industrial Scientific 1810-9155 Equivalent Calibration Gas: 25% LEL Pentane, 18% Oxygen, 100 ppm Carbon Monoxide, 25 ppm Hydrogen Sulfide, Balance Nitrogen

Description 25% LEL Pentane / 18% Oxygen / 100 ppm Carbon Monoxide / 25 ppm Hydrogen Sulfide / Balance Nitrogen Industrial Scientific multi-mixture calibration gas used to calibrate ISC gas detection equipment.Fully compatible with Industrial Scientific gas detectors requiring specified cal gas mixture.Precision blended and inspected to industry standards - National Institute of Standards and Technology (NIST) traceable and certified.Made in the USA by GASCO, ISO 9001:2008 Certified.Contact us for custom dual, triple and quad span gas mixtures.Subject to hazardous materials shipping requirements. Note: ISC Calibration Gas By GASCO is an equivalent and does not include an iCard. Technical SpecsGas Mixture:25% LEL Pentane, 18% Oxygen, 100 ppm Carbon Monoxide, 25 ppm Hydrogen Sulfide, Balance NitrogenGas Type:Reactive Multi-MixtureCylinder Size:58LPart Numbers:ISC Part Number: 1810-9155GASCO Part Number: 58L-18109155Manufactured by:Gasco Affiliates, LLCShelf Life:15 MonthsRegulator Compatibility:Valve Inlet: C-10 (all cylinders)Fixed Flow (70 Series)Demand Flow (75-DFR)Dial-a-Flow (74-DAF)Fixed Flow Push Button (73-PBR)Trigger Control Fixed Flow (70-Trigger)Flow Matching Valve (72-MFV)Tubing Compatibility:Teflon Tubing MSDS MSDS for Pentane (0-0.75%), Carbon Monoxide (0.0005-1.0%), Hydrogen Sulfide (0.001-0.025%, Oxygen (0.0015-23.5%), Balance Nitrogen 

  • ASIN: B01LZXV1OQ
  • Brand: Gasco
  • Manufacturer: Gasco

Gas Regulator, 0.5Lpm

Gas Regulator, 0.5Lpm

Gas Regulator, Flow Rate 0. 5Lpm, For Use With 34L Gas Cylinders

  • ASIN: B007I9RJSC
  • Brand: Industrial Scientific
  • Manufacturer: INDUSTRIAL SCIENTIFIC