Starrett 120A-6 Dial Caliper, Stainless Steel, White Face, 0-6" Range, +/-0.001" Accuracy, 0.001" Resolution

Starrett 120A-6 Dial Caliper, Stainless Steel, White Face, 0-6" Range, +/-0.001" Accuracy, 0.001" Resolution

The Starrett dial caliper has sharp black graduations every 0.100" on the no-glare, satin-finished stainless steel bar, and graduations on the dial every 0.001". One full revolution of the dial is equivalent to 0.100". These calipers have knife-edge contacts for measuring both inside dimensions (ID) and outside dimensions (OD). The knife-edge contacts can be used to scribe parallel lines on the workpiece. This caliper can be used with one hand through operating the fine adjustment roll with the thumb. The lock screw locks the dial bezel and holds the sliding jaw in position. The depth rod is integrated into the rack of the caliper, unlike many calipers which offer a detachable depth rod, or none at all. The hardened stainless steel components, including the bar, measuring surfaces, rack, gears, and depth rod, offer corrosion resistance, increased accuracy, and long life. Positive split gear anti-backlash control offers increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls, which prevents the gear teeth from jamming. It is undesirable to have much backlash due to the lack of precision offered by the increased amount of play between gears. Certain gear designs can minimize or eliminate backlash; split gear systems actually split the gear into two gears, each half as thick as the original gear. One of these gears is then fixed to the shaft while the other gear is allowed to turn. The free-turning gear is connected to coil springs that rotate it until all of the backlash in the control system has been eliminated. The rack teeth point down to keep foreign matter from clogging the gear operations. This prevents measurement errors where metal chips could interfere with proper caliper operation. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, m... [Read More]

  • UPC: 049659645149
  • ASIN: B00002254I
  • Brand: Starrett
  • Size: 0"-6" Range, +/-0.001" Accuracy, 0.001" Resolution
  • Manufacturer: Starrett

Starrett 3202-6 Dial Caliper, Hardened Stainless Steel, 0-6" Range, 0.001" Graduation, White

Starrett 3202-6 Dial Caliper, Hardened Stainless Steel, 0-6" Range, 0.001" Graduation, White

The Starrett Dial Calipers provide quick, accurate measurements of outside dimensions, inside dimensions and depth. The dial caliper is the most versatile precision hand tool on the market and has been the first choice of metal working professionals for decades. This series features 0-6" range and 0.001" graduation in fitted case.

  • UPC: 049659614671
  • ASIN: B00SJADL3G
  • Brand: Starrett
  • Manufacturer: Starrett

Anytime Tools Premium Dial Caliper 0-6"/0.001" Precision Double Shock Proof Solid Hardened Stainless Steel

Anytime Tools Premium Dial Caliper 0-6"/0.001" Precision Double Shock Proof Solid Hardened Stainless Steel

Professional Precision Dial Caliper When it comes to calipers, Anytime Tools is the professionals choice. Quick and accurate measurement of Outside, Inside and Depth.Super high precision gears. Double Shock Proof Design. Zero Parallel Tolerance. Ultra Smooth operation.Precision Dial 0.001" Graduation / 0.1" Per revolutionRange: 0-6"Measure External, Internal and depthSolid Hardened stainless steel Thumb roll for rapid settingKnurled lock assures precise settingsPadded case included

  • UPC: 810823012834
  • ASIN: B00IIS7DWE
  • Brand: Anytime Tools
  • Size: 6"
  • Manufacturer: Anytime Tools

Mitutoyo 505-742 Dial Caliper, D6"TX, 0.1" per Rev, 0-6" Range, 0.001" Accuracy

Mitutoyo 505-742 Dial Caliper, D6"TX, 0.1" per Rev, 0-6" Range, 0.001" Accuracy

Dial Caliper, Dimension Type Inch, Range 0 In. to 6 In. , Graduations 0. 001 In. , Range per Revolution 0. 100 In. , Jaw Depth 1. 57 In. , Construction Material Hardened Stainless Steel, Dial White, Features Lapped Jaws, Inverted Covered Rack and Dial Movement, Meets US Federal Specifications, Includes Fitted Case, Certificate of Calibration, Long Form Calibration Certificate Yes

  • UPC: 603908594864
  • ASIN: B0142HWYIW
  • Brand: Mitutoyo
  • Manufacturer: Mitutoyo

Anytime Tools Dial Caliper 6" / 150mm DUAL Reading Scale METRIC SAE Standard INCH MM

Anytime Tools Dial Caliper 6" / 150mm DUAL Reading Scale METRIC SAE Standard INCH MM

Anytime Tools Dial Caliper 6" / 150mm DUAL Reading Scale METRIC SAE Standard INCH MM

  • UPC: 810823012445
  • ASIN: B00B5XJW7I
  • Brand: Anytime Tools
  • Manufacturer: Anytime Tools

HFS (Tm) 0- 6" ; 4 WAY DIAL CALIPER .001" SHOCK PROOF NEW ; PLASTIC CASE

HFS (Tm) 0- 6" ; 4 WAY DIAL CALIPER .001" SHOCK PROOF NEW ; PLASTIC CASE

.001" Accuracy, Range of 0-6" Two sets of jaws measure inside and outside dimensions and sliding rule measures depth Rotating bezel makes it easy to reset zero or choose a different baseline if desired. Thumb roll allows exact positioning and slide lock holds reading in place Shock proof, includes padded case

  • UPC: 789398115809
  • ASIN: B01C6WHQ92
  • Brand: Hardware Factory Store
  • Size: 6 to 7.9 Inches
  • Manufacturer: HardwareFactoryStore

Accusize Industrial Tools 0-6 inch by 0.001 inch Precision Dial Caliper, Stainless Steel, in Fitted Box, P920-S216

Accusize Industrial Tools 0-6 inch by 0.001 inch Precision Dial Caliper, Stainless Steel, in Fitted Box, P920-S216

Range: 0-6'', Resolution: 0.001'' Hardened stainless steel 0.100" single revolution Direct reading to .001'' in large clear dial/.-100 Measuring face hardened, precision ground and micro-lapped for absolute accuracy Adjusting slide for fine adjustment Inside, outside, and depth measurements Satin chrome finish, crisp engraved graduations Clamp for repetitive setting Accurate to .001'' per 6'' Covered rack Deluxe case

  • UPC: 641799809735
  • ASIN: B00PWD3JQ2
  • Brand: Accusize Industrial Tools
  • Size: 0-6"
  • Manufacturer: Accusize Co., Ltd.

iGaging 6" Fractional & Decimal Inch Combination Dial Caliper

iGaging 6" Fractional & Decimal Inch Combination Dial Caliper

This hardened stainless steel dial caliper features dual scales - a fractional inch scale with 1/64 inch graduations on the white outer scale and a Decimal inch scale with 0.01 graduations on the green inner scale. Comes packed in a padded plastic storage case.

  • UPC: 080911000306
  • ASIN: B005FRGF1Q
  • Brand: iGaging
  • Manufacturer: iGaging

Fowler Full Warranty 52-008-007-0, 0-6" Whiteface Dial Caliper, ±0.001" Accuracy

Fowler Full Warranty 52-008-007-0, 0-6" Whiteface Dial Caliper, ±0.001" Accuracy

The Fowler Dial Caliper has dial graduations of 0.001" with 0.001" accuracy, a sliding jaw with a lock, and a covered rack. The knurled lock screw holds the sliding jaw in position to hold measurement. A covered rack prevents dirt and debris from clogging the gear, and helps prevent measurement errors. A thumb-operated fine adjustment roller allows for one-handed use. This caliper is used for measuring inside dimensions (ID), outside dimensions (OD), depth, and step. The caliper measures 0.10" per revolution of the dial. The dial has 0.001" graduations, and the beam has engraved 0.10" graduations. The hardened stainless steel components, including the beam, measuring surfaces, rack, gears, and depth rod, offer corrosion resistance, increased accuracy, and long life. Self-contained movement eliminates gear misalignment, while the dual pinion drive mechanism reduces wear on the rack and pinion. An adjustable dial enables setting zero. Spring anti-backlash control offers increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls that prevents the gear teeth from jamming. It is undesirable to have much backlash due to the lack of precision offered by the increased amount of play between gears. Certain gear designs can minimize or eliminate backlash; spring anti-backlash systems use a spring to add a compressive force, thereby minimizing backlash. The hardened stainless steel is polished to a satin chrome finish, to help prevent glare. This caliper comes with a fitted case. Dial calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to measure inside, outside, and step measurements in standard or metric units. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides... [Read More]

  • UPC: 646795101449
  • ASIN: B0015S8PNA
  • Brand: Fowler
  • Manufacturer: Fred V. Fowler Company, Inc.

Dial Caliper, 0-8 in, Dial B

Dial Caliper, 0-8 in, Dial B

Dial Caliper, Range 0-8 In, Graduations 0.001 In, Jaw Depth 1.97 In, Dial Color White, Dial Hand Completes One Revolution Per Each 0.100 Inches, Dial Face B, Measure Outside/Inside/Step/Depth, Accuracy 0.001 In, Hardened Stainless Steel, Jaws Lapped For Accuracy, Inverted Covered Rack, Dial Movement Provides Extra Shock Protection, Meets US Federal Specifications, Includes Fitted Case

  • UPC: 603908594871
  • ASIN: B0142HWZPE
  • Brand: Mitutoyo
  • Manufacturer: Mitutoyo