Arkon Replacement Upgrade or Additional Windshield Dashboard Suction Mounting Pedestal for Garmin nuvi 40 50 1450 1200 GPS
Arkon Replacement Upgrade or Additional Windshield Dashboard Suction Mounting Pedestal for Garmin nuvi 40 50 1450 1200 GPS
Replace that tired old Garmin suction mount that always falls off with Arkon’s suction mount. The GN115 windshield or dashboard suction mounting pedestal is compatible with Garmin nuvi devices, including the 40, 50, 200, 2013, 24x5, and 25x5 Series, as well as Garmin nuvi 1450, 1450T, 1490T, 1200, 1250, 1260T, 1300, 1350, 1350T, 1370T, and 1390T models. This mount package includes the Travelmount Deluxe Mini Windshield Suction Pedestal and an optional 3M adhesive dashboard mounting disk. (The above listed Garmin nuvi devices should include a 17mm swivel ball-compatible mount; replacement mounts and holders sold separately.) The Travelmount Deluxe Mini Windshield Suction Mounting Pedestal is ideal for car dashboards, windshields, and other flat surfaces. The mount features a standard suction mount base made of thermoplastic polyurethane (TPU). This type of suction performs well in hot and especially cold climates. The arm of the windshield suction car dock mount adjusts vertically and provides 360° rotation, giving you the ultimate flexibility in viewing the cell phone from any angle. To install, simply clean the mounting area with the included alcohol pad to ensure an optimum grip, then set the pedestal and push down on the one-touch lever to engage the suction. Arkon recommends using the included 3M adhesive mounting disk for dashboard installation.
- UPC: 088037966209
- ASIN: B000U0S304
- Brand: ARKON
- Manufacturer: Arkon
ARKON BT010 Windshield Suction Mount for EZ Pass Toll Transponders Bluetooth GPS Receivers and Radar Detectors
ARKON BT010 Windshield Suction Mount for EZ Pass Toll Transponders Bluetooth GPS Receivers and Radar Detectors
Arkon's BT010 windshield suction mount is ideal for mounting Bluetooth GPS receivers, small radar detectors, and auto-deduct/EZ-Pass toll road electronic devices that need to be mounted high up on the windshield. This mount features a 2 5/8” x 2” base platform to attach your device with either metal strips for magnetic attachment, or hook-and-loop fastener tape. The mount installs easily without tools and can be removed or transferred to another vehicle conveniently. This mount uses PVC suction and a one-touch suction lever to keep the mount on the windshield. The base platform adjusts vertically in order to position the device exactly where you want it.
- UPC: 047407500108
- ASIN: B000FGI9R0
- Brand: ARKON
- Manufacturer: Arkon Resources Inc.
Arkon GPS Car Mount for Garmin nuvi 40 50 200 2013 24x5 25x5 Series GPS Lighter Socket Mount with Power Dongle
Arkon GPS Car Mount for Garmin nuvi 40 50 200 2013 24x5 25x5 Series GPS Lighter Socket Mount with Power Dongle
The GN097 lighter socket car mounting pedestal is compatible with Garmin nuvi devices having the 17mm swivel ball mounting pattern, including models in the 40, 50, 200, 2013, 24x5, and 25x5 Series, as well as Garmin nuvi models 1450, 1450T, 1490T, 1200, 1250, 1260T, 1300, 1350, 1350T, 1370T, and 1390T. (The above listed Garmin nuvi devices should include a 17mm swivel ball-compatible mount bracket; replacement brackets and holders sold separately.) This package includes Arkon’s lighter socket mount with integrated power dongle (holders sold separately). Connect your device’s car charger (sold separately) to the 12V power dongle on the mount while your Garmin nuvi is mounted to the car’s accessory outlet or cigarette lighter socket. Loosen the wing nuts to adjust the mount up to a 90° angle, and the swivel ball adapter head provides 360° rotation for ultimate flexibility.
- UPC: 167329210890
- ASIN: B000BP8GQO
- Brand: ARKON
- Manufacturer: Arkon
Arkon Premium Aluminum Motorcycle Handlebar Camera Mount
Arkon Premium Aluminum Motorcycle Handlebar Camera Mount
Arkon’s MC2BCAM premium aluminum motorcycle handlebar camera mount is compatible with smaller digital cameras having the 1/4”-20 mounting pattern, such as the Sony Action Cam, Sony POV HD Flash Memory Camcorder, JVC ADIXXION 2, Contour+2, and ContourROAM2. This mount package includes the Premium Motorcycle Handlebar Camera Mount with 1/4”-20 mounting bolt. Available in black or chrome (see Arkon Model MC2CCAM) finishes, the mount is made of aluminum and features a minimal but solid design. The mount fits on handlebars measuring up to 31.75mm or 1.25 inches in diameter and is easy to install with the included hex key. (Three handlebar spacer/adapter rings of different widths are also included with the mount. Choose the appropriate size for optimum mounting to your handlebar.) Simply screw the bottom of your action camera onto the 1/4”-20 mounting bolt, and you’re ready to take photos or videos on your ride. The mount swivels 360 degrees to position the camera to your liking. To use the mount with a Garmin GPS device, Arkon recommends Model MC2B. Or, couple the mount with a water-resistant case for smartphones or GPS devices with Model MC2B5WPCS. For use of the mount with Arkon universal smartphone and tablet holders with the Dual-T configuration, Arkon recommends Model MC2BSBH.
- UPC: 047407133252
- ASIN: B00IGXP7YC
- Brand: ARKON
- Manufacturer: Arkon Resources Inc.
Arkon 80mm Adhesive Mounting Disk for Car Dashboards GPS Smartphone Dashboard Disc
Arkon 80mm Adhesive Mounting Disk for Car Dashboards GPS Smartphone Dashboard Disc
The AP013 80mm adhesive mounting disk allows you to mount an Arkon or third-party 70mm windshield suction mounting pedestal to your car’s dashboard, including Arkon’s mounting pedestal models GN079WD-SBH, GN068WD-SBH, GN022-SBH, GN014-SBH, GN015-SBH, and GN042-SBH. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the disk adhesive to cure on the dashboard before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For a 90mm disk to use with 80mm suction mounts, see Arkon Model AP020.
- UPC: 047407500139
- ASIN: B001IB2120
- Brand: ARKON
- Size: 80mm disk for 70mm suctions
- Manufacturer: Arkon
Arkon 90mm Adhesive Mounting Disk for Car Dashboards Garmin TomTom GPS Dashboard Disc
Arkon 90mm Adhesive Mounting Disk for Car Dashboards Garmin TomTom GPS Dashboard Disc
The AP020 90mm adhesive mounting disk allows you to mount an Arkon or third-party 80mm windshield suction mounting pedestal to your car’s dashboard, including mounting pedestals for Garmin and TomTom GPS devices. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the adhesive to cure before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For an 80mm disk to use with 70mm suction mounts, see Arkon Model AP013. For a 70mm disk to use with 60mm suction mounts, see Arkon Model AP036.
- UPC: 047407500207
- ASIN: B001DAT0XE
- Brand: ARKON
- Size: 90mm disk for 80mm suctions
- Manufacturer: Arkon
iOttie Easy One Touch 4 Dash & Windshield Car Mount Phone Holder || iPhone Xs Max R 8 Plus 7 Samsung Galaxy S10 E S9 S8 Plus Edge Note 9 & Other Smartphones
iOttie Easy One Touch 4 Dash & Windshield Car Mount Phone Holder || iPhone Xs Max R 8 Plus 7 Samsung Galaxy S10 E S9 S8 Plus Edge Note 9 & Other Smartphones
The iOttie Easy One Touch 4 Dashboard & Windshield Mount is a universal smartphone solution that is engineered to safely enhance your driving experience. U.S. patent protected, the one of a kind Easy One Touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. Utilize the increased range, strength, and stability of the telescopic arm to find the perfect position for your smartphone on either dashboard or windshield. Securely mount on your dashboard, windshield, or desk with iOttie’s super strong suction cup. The Easy One Touch Dashboard and Windshield Mount is universally compatible with all smartphones sizes to hold your device securely so you can drive safely.
- UPC: 852306006756
- ASIN: B076B27WP6
- Brand: iOttie
- Manufacturer: iOttie
Arkon AMPS Car or Wall Mount Bracket for Camera GPS Satellite Radio and Video Camera Retail Black
Arkon AMPS Car or Wall Mount Bracket for Camera GPS Satellite Radio and Video Camera Retail Black
The RM2XAMPS 4-Hole AMPS Mount is part of Arkon’s Robust Mount Series. It features an AMPS drill mount base as well as an AMPS head. It can be drilled into solid, flat surfaces, such as walls, tables, and workbenches. The mount is compatible with devices having a 4-Hole AMPS pattern, including cameras, GPS devices, or satellite radios. The AMPS pattern consists of four holes located in a rectangular pattern spaced at 30.17mm x 38.05mm (measured as the center-to-center distance between holes). This tough mount is also ideal for mobile radio holders, housings, and other devices used by public safety, construction, and utility applications. This package includes only the Heavy-Duty 4-Hole AMPS Mount with 4-Hole AMPS Head. This mount measures approximately 5.25 inches high from end to end, and is made of a combination of nylon and fiber. The arm of the pedestal swivels on both the top and the bottom, providing 360-degree rotation and the ultimate flexibility in positioning the device at any angle.
- UPC: 047407181345
- ASIN: B00K6ZHP48
- Brand: ARKON
- Manufacturer: Arkon
ECOXGEAR GDI-EGCBM Universal Handlebar Tube Clamp Mount for Bluetooth Speakers, Dash Cams and Action Cameras
ECOXGEAR GDI-EGCBM Universal Handlebar Tube Clamp Mount for Bluetooth Speakers, Dash Cams and Action Cameras
- UPC: 069060232141
- ASIN: B00CTY4QUK
- Brand: ECOXGEAR
- Size: One Size
- Manufacturer: Grace Digital
Arkon Premium Aluminum Motorcycle Handlebar Camera Mount
Arkon Premium Aluminum Motorcycle Handlebar Camera Mount
Arkon’s MC2CCAM premium aluminum motorcycle handlebar camera mount is compatible with smaller digital cameras having the 1/4”-20 mounting pattern, such as the Sony Action Cam, Sony POV HD Flash Memory Camcorder, JVC ADIXXION 2, Contour+2, and ContourROAM2. This mount package includes the Premium Motorcycle Handlebar Camera Mount with 1/4”-20 mounting bolt. Available in chrome or black (see Arkon Model MC2BCAM) finishes, the mount is made of aluminum and features a minimal but solid design. The mount fits on handlebars measuring up to 31.75mm or 1.25 inches in diameter and is easy to install with the included hex key. (Three handlebar spacer/adapter rings of different widths are also included with the mount. Choose the appropriate size for optimum mounting to your handlebar.) Simply screw the bottom of your action camera onto the 1/4”-20 mounting bolt, and you’re ready to take photos or videos on your ride. The mount swivels 360 degrees to position the camera to your liking. To use the mount with a Garmin GPS device, Arkon recommends Model MC2C. Or, couple the mount with a water-resistant case for smartphones or GPS devices with Model MC2C5WPCS. For use of the mount with Arkon universal smartphone and tablet holders with the Dual-T configuration, Arkon recommends Model MC2CSBH.
- UPC: 047407133283
- ASIN: B00IGXP7X8
- Brand: ARKON
- Manufacturer: Arkon Resources Inc.