Attwood 1749-4 Quiet Blower Water Resistant (White, 4-Inch)
Attwood 1749-4 Quiet Blower Water Resistant (White, 4-Inch)
This Attwood Turbo 4000 Series II In-Line Blower provides outstanding ventilation airflow for areas such as engine compartments, galleys, bilges, and heads. It features a patented, in-line design and the 5-blade fan maximizes airflow and efficiency. The blade sweep and pitch are engineered for a high lift coefficient, which results in increased airflow speed for optimized ventilation. It matches the airflow of competitive in-line blowers with significantly reduced noise output. For added durability, it has an engineered plastic housing that resists deformation during installation, and prevents blade-to-housing interference. No other bilge blowers in the industry provide such powerful system output at such low power input in a compact size. System airflow exceeds older-style in-line blowers by as much as 25 percent. It is also up to four times more efficient than competitive blowers as it draws up to 40 percent fewer amps. This blower is marine ignition protected and has built-in mounting feet that permit easy vertical or horizontal installation. This 12-volt, water-resistant white blower is intended for use with 4-inch interior diameter ventilation hose. It installs with #10 fasteners. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing of the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.
- UPC: 027204068254
- ASIN: B003EX02DA
- Brand: attwood
- Size: 4-Inch
- Manufacturer: Attwood
Attwood 1733-4 Blower H20 Resist (White, 3-Inch)
Attwood 1733-4 Blower H20 Resist (White, 3-Inch)
Turbo 3000 water resistant blower, white
- UPC: 012302710907
- ASIN: B001O0DE9E
- Brand: attwood
- Size: 3"
- Manufacturer: Attwood
Attwood 1731-4 Blower (White, 3-Inch)
Attwood 1731-4 Blower (White, 3-Inch)
Turbo 3000 standard blower, white
- UPC: 779421043247
- ASIN: B001O0DE8K
- Brand: attwood
- Size: 3"
- Manufacturer: Attwood
''Attwood" Turbo 3000 Series In-Line Blower - 12v - White
''Attwood" Turbo 3000 Series In-Line Blower - 12v - White
Attwood Turbo 3000 Series In-Line Blower - 12v - White Attwood Turbo 3000 Blower 120 Cfm Standard 12v White Turbo 3000 In-Line Series Blower Part #: 1731-4 The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size. Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads with optional MP1 molded rubber connectors. Improved 3" design. Features: Nickel-plated motor can for corrosion resistance Stiffening ribs to reduce housing distortion Five-blade fan maximize airflow and efficiency Tabs in intake and exhaust hold ventilation hose/clamp firmly in place Low amp draw motor for longer blower and battery life Built-in mounting feet allow easy vertical or horizontal install Manufacturer Part Number: 1731-4
- UPC: 826713869488
- ASIN: B07G85M2ZH
- Brand: ''Attwood"
- Manufacturer: Attwood.Inc
ATTWOOD MARINE 1731-4 / Attwood Turbo 3000 Series In-Line Blower - 12V - White
ATTWOOD MARINE 1731-4 / Attwood Turbo 3000 Series In-Line Blower - 12V - White
Turbo 3000 In-Line Series BlowerPart #: 1731-4The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size.Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads with optional MP1 molded rubber connectors. Improved 3" design.Features:Nickel-plated motor can for corrosion resistanceStiffening ribs to reduce housing distortionFive-blade fan maximize airflow and efficiencyTabs in intake and exhaust hold ventilation hose/clamp firmly in placeLow amp draw motor for longer blower and battery lifeBuilt-in mounting feet allow easy vertical or horizontal install
- UPC: 097914414399
- ASIN: B010XGSKVQ
- Brand: attwood
- Manufacturer: ATTWOOD MARINE
Attwood Turbo 4000 Series II In-Line Blower - 12V - White
Attwood Turbo 4000 Series II In-Line Blower - 12V - White
Turbo 4000 Series II In-Line BlowerPart #: 1747-4Attwoods improved Turbo 4000 Series II sets the standard for in-line blower performance. Utilizing advanced fan blade design techniques, Attwood has developed a blower system that matches air flow of existing in-line blowers at a significantly reduced noise level. The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size.Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads.Features:Nickel-plated motor can for corrosion resistanceStiffening ribs to reduce housing distortionFive-blade fan maximize airflow and efficiencyTabs in intake and exhaust hold ventilation hose/clamp firmly in placeLow amp draw motor for longer blower and battery lifeBuilt-in mounting feet allow easy vertical or horizontal install3-Year Warranty
- ASIN: B01M8JUT9L
- Brand: attwood
- Manufacturer: Attwood Marine
Attwood Marine (6p) Turbo 3000 - 3" Blower, Water-Resistant, White, 12 Volt
Attwood Marine (6p) Turbo 3000 - 3" Blower, Water-Resistant, White, 12 Volt
Turbo 3000 Series In-Line BlowerPart #: 1733-4The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size.Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads with optional MP1 molded rubber connectors. Improved 3" design.Features: Nickel-plated motor can for corrosion resistance Stiffening ribs to reduce housing distortion Motor cap to seal wires and motor for water resistance Five-blade fan maximize airflow and efficiency Tabs in intake and exhaust hold ventilation hose/clamp firmly in place Low amp draw motor for longer blower and battery life Built-in mounting feet allow easy vertical or horizontal install Specifications: Open Flow (CFM): 120 CFM Volts: 12V Box Dimensions: 4"H x 5"W x 6"L WT: 1 lbs UPC: 022697173348 Quick Guide (pdf)Brochure (pdf)
- UPC: 022697173348
- ASIN: B011KLEQJS
- Brand: attwood
- Size: Default Title
- Manufacturer: Attwood Marine
Attwood Turbo 4000 Series II Water-Resistant In-Line Blower - 12V - White
Attwood Turbo 4000 Series II Water-Resistant In-Line Blower - 12V - White
Turbo 4000 Series II In-Line BlowerPart #: 1749-4Attwoods improved Turbo 4000 Series II sets the standard for in-line blower performance. Utilizing advanced fan blade design techniques Attwood has developed a blower system that matches air flow of existing in-line blowers at a significantly reduced noise level. The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size.Patented in-line design - provides ventilation for engine compartments galleys bilges and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads.Features: Nickel-plated motor can for corrosion resistance Stiffening ribs to reduce housing distortion Motor cap to seal wires and motor for water resistance Five-blade fan maximize airflow and efficiency Tabs in intake and exhaust hold ventilation hose/clamp firmly in place Low amp draw motor for longer blower and battery life Built-in mounting feet allow easy vertical or horizontal install 3-Year Warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Product : ATTWOOD TURBO 4000 BLOWER 200 CFM WATER RESISTANT 12V WHITE Manufacturer : ATTWOOD MARINE Manufacturer Part No : 1749-4 UPC : 022697174949
- UPC: 022697174949
- ASIN: B07CQ7D3PQ
- Brand: attwood
- Manufacturer: Attwood Marine
Coolerguys 120x25mm Rear Exhaust Blower Fan 12v with 3pin Connector
Coolerguys 120x25mm Rear Exhaust Blower Fan 12v with 3pin Connector
Coolerguys 120x25mm Rear Exhaust Blower Fan 12v with 3pin Connector This fan was made to cool components that have vents on the top of them, simply place the blower fan on top and it'll suck the warm air out of the device and shoot it out the back.Works great to cool Receivers, DVRs and other media equipment.In order to power these fans from a standard AC outlet you can pair it with any of the power supply kits we offer Includes 4 attachable rubber feet so you can set the fan onto any device without it scratching. Dimension: 120x120x25 MM Bearing: Dual Ball Rated voltage: 12v Operating voltage range: 8-12v Rated Current: 0.18A Lock rotor current: 0.16A Rated Power: 2.16W Rated Speed: 1000 RPM±10% Air Flow: 17 CFM Static Air Pressure: 5.6 mmAq(InchH20) Noise Level: 19.8 dB(A) Life Expectancy: 50,000 Hours @ 25C SKU: 840556094272
- UPC: 840556094272
- ASIN: B004K3BVQ0
- Brand: Coolerguys
- Manufacturer: Coolerguys
Attwood Turbo 4000 Series II Water-Resistant In-Line Blower 12V White
Attwood Turbo 4000 Series II Water-Resistant In-Line Blower 12V White
Turbo 4000 Series II In-Line Blower. Part Num: 1749-4. Attwoods improved Turbo 4000 Series II sets the standard for in-line blower performance. Utilizing advanced fan blade design techniques, Attwood has developed a blower system that matches air flow of existing in-line blowers at a significantly reduced noise level. The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size. Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with 10 fasteners. Individual carton includes 2 tie straps. All are CE certified.16-gauge tinned and caulked copper wire leads.
- UPC: 757274282822
- ASIN: B00J5O9H10
- Brand: attwood
- Manufacturer: Attwood Marine