BONAI 16+2 Bay Smart Rechargeable Battery Charger with LCD Display for AA AAA NiMH NiCD Batteries & Li-ion 9V Rechargeable Batteries with AC Wall Adapter nimh Battery Charger

BONAI 16+2 Bay Smart Rechargeable Battery Charger with LCD Display for AA AAA NiMH NiCD Batteries & Li-ion 9V Rechargeable Batteries with AC Wall Adapter nimh Battery Charger

Bonai Smart Charger-16 Bay AA & AAA battery charger Features: 1) LCD display the charging statues. 2) Increase the rechargeable battery and charger distance to 7mm and a number of holes for heat dissipation, to protect your charger and batteries. 3) Trickle Electric Current Charge, Can expand battery life and charge battery full more than 99%. 4) Bonal nimh battery charger Wide Voltage: 110V~240V, 16-channel charging more stably. 5) Automatically stop charging when detecting improper input voltage, defective or short circuit or non rechargeable batteries. 6) Automatically turn to trickle charge, prevent the batteries from over-voltage, over-current or over-heat.

  • ASIN: B07GGSPXDY
  • Brand: BONAI
  • Size: 16+2 Bay Battery Charger
  • Manufacturer: BONAI

Tenergy Universal RC Battery Charger for NiMH/NiCd 6V-12V Battery Packs, Fast Charger for RC Car, Airsoft Batteries, Compatible with Standard Size Tamiya/Mini Tamiya/Alligator Clips Connectors

Tenergy Universal RC Battery Charger for NiMH/NiCd 6V-12V Battery Packs, Fast Charger for RC Car, Airsoft Batteries, Compatible with Standard Size Tamiya/Mini Tamiya/Alligator Clips Connectors

Features-Charging Current 1A for battery packs with capacity from 1000mAh -1800mAh-Charging Current 2A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is apprx. 1.5 hours-Automatically charging ending with negative delta V-Worldwide usage with 120-240V ACAccessories Included1 standard Tamiya connector with Temperature Sensor1 adapter from standard Tamiya to Mini Tamiya1 adapter from standard Tamiya to a pair of alligator clipCharger SpecificationInput: AC 100-240VOutput: 6-12V, 1A or 2AOperation Instruction-Don't charge battery packs with voltage less than 6V or greater than 12V and capacity smaller than 1000mAh or larger than 5000mAh-Battery pack must be made by high drain current cell-Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by MisuseCautionThe charger is designed for indoor use only. Don't leave the charger unattended during chargingThe Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goodsDon't cover the charger when charging, ambient temperature shall not be more than 40oCDon't leave the batteries and chargers on wood surface or carpet.Cut off the power supply before connect or disconnect the charger with batteriesWARNING - DO NOT CHARGE LiPO Batteries-DO NOT CHARGE: if the label on your battery says: LiPO, LIPO, Li-Po, LI-PO, Li-Polymer, Li-Poly, Lithium Polymer, Li-ion, Lithium-Ion, Lithium.-Caution: LiPO battery packs may often have two sets of leads/connectors - do not charge if identified as LiPO battery.Failure to follow these warnings may result in fire or personal injury.Contact our customer support team if you are unsure if your battery can be charged.

  • UPC: 885420227714
  • ASIN: B003MXMJX8
  • Brand: Tenergy
  • Manufacturer: Tenergy

Energizer Rechargeable AA and AAA Battery Charger (Recharge Pro) with 4 AA NiMH Rechargeable Batteries, Auto-Safety Feature, Over-charge Protection

Energizer Rechargeable AA and AAA Battery Charger (Recharge Pro) with 4 AA NiMH Rechargeable Batteries, Auto-Safety Feature, Over-charge Protection

Conveniently charges 4 AA or AAA NiMH rechargeable batteries at the same time.3-5 hour charge time with auto shutoff to prevent overcharging and battery damage. Manufactured in China .The charger is equipped with audio and visual alerts. A red light means that charging has started, and you will hear an audible beep when charging begins. A yellow light appears when charging is 50 percent complete and charging is continuing. A green light means charging is complete, and the batteries are 100 percent full. You will hear an audible beep upon completion. If a bad battery is detected, a red X will illuminate, and the charger generates a repetitive audible beep upon detection. Audio and visual alerts:Red light - Charging has started; audible beep when charging begins. Yellow light - Charging is 50% complete and charging. Green light - Charge is complete and batteries are 100% full; audible beep upon completion.Bad Battery Detection Alert - If a bad battery is detected a red ‘x’ will illuminate; repetitive audible beep upon detection

  • UPC: 039800121042
  • ASIN: B00IM3P8GS
  • Brand: Energizer
  • Size: Pro Charger w/ 4-AA
  • Manufacturer: Energizer Batteries- Consumables

Tenergy Smart Charger for 8.4V-9.6V NiMH Battery Packs w/Mini Tamiya Connector + Standard Tamiya Adapter

Tenergy Smart Charger for 8.4V-9.6V NiMH Battery Packs w/Mini Tamiya Connector + Standard Tamiya Adapter

Use it for any 8.4v-9.6v NiMH Battery Packs that are used in RC Cars/Airplanes. Just make sure connector is Standard or Mini Tamiya!Features*Smart Charger for NiMH battery packs of 8.4V-9.6V (7-8 cells).*Recommended battery packs with capacity of 600-2000mAh.*Able to auto distinguish bad battery and indicate malfunction.*Able to activate over-discharged cells. *Current ram-up way benefits cell capacity and life cycle.*Automatically stop when battery pack is fully charged by Delta Peak detection.*Short circuit & reverse polarity protections.*Built in mini male tamiya connector.Includes*Smart AC Charger for 8.4-9.6V NiMH Battery Pack*Instruction Manual*Mini Tamiya to Standard Tamiya AdapterSpecificationsRating Input Voltage: 100~240V AC 50/60HzRating input current: 2AmpInput power:

  • UPC: 844949005708
  • ASIN: B004W8H5CM
  • Brand: Tenergy
  • Manufacturer: Tenergy

EBL Smart Battery Charger for C D AA AAA 9V Ni-MH Ni-CD Rechargeable Batteries with Discharge Function & LCD Display

EBL Smart Battery Charger for C D AA AAA 9V Ni-MH Ni-CD Rechargeable Batteries with Discharge Function & LCD Display

Two Model - Charge & Discharge Press the blue button for charging and discharging "CHG" -- Charging; "DISCHG" -- Discharging; "ERROR"-- install the battery incorrectly or the battery is broken one. MCU controlled, Safety Protected Negative delta V (- ∆V) cut-off function (except for 9V batteries), overcharge protection, short circuit protection and non-rechargeable or bad cell detection make it more easier for usage. Compatible Models For Ni-MH Ni-CD rechargeable batteries: 1/2/3/4 AA, AAA, C, D and 1/2 9V batteries. Correct Operations and Stockpile for Better Using * LED will not turn off when fully charged for 9V battery, please remove the 9V battery timely when fully charged. * Please ensure the battery installed is correct: make the +/- pole of the battery is match for the +/- pole of the charger. * Using environment: 0℃ to 40℃, it is normal phenomenon that the battery is warmer than room temperature when charging. * Do not disassemble or reassemble the charger by yourself for safety reason. Charging Time Table: 1pcs Battery Type (Ni-MH) Capacity Charging Time (approx) AAA 500-1200mAh 1-3 hours AA 1300-2800mAh 1.5-3.5 hours C 1800-5000mAh 2-6 hours D 1800-10000mAh 2-10 hours 9V 150-600mAh 5-20 hours What You Get EBL Battery Charger x1 User Manual x1 AC Cable x1

  • UPC: 709445071049
  • ASIN: B073ZD7XVV
  • Brand: EBL
  • Size: Upgraded Charger
  • Manufacturer: EBL

Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery Pack Charger for NiMH/NiCD/Li-PO/Li-Fe Packs w/ LCD Display Hobby Battery Charger w/ Tamiya/JST/EC3/HiTec/Deans Connectors + Power Supply

Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery Pack Charger for NiMH/NiCD/Li-PO/Li-Fe Packs w/ LCD Display Hobby Battery Charger w/ Tamiya/JST/EC3/HiTec/Deans Connectors + Power Supply

* NiMH/NiCD 1~15 cells ( 1.2v to 18v) * Li-PO/Lithium Ion 1~6 series ( 3.7v to 22.2v) * Li-Fe 1~6 series * Sealed Lead Acid (SLA) * Charge your NiMH/NiCD Receiver Packs: 3.6v, 4.8v, 6v, or 9.6v * Charge your LiFE Packs: 6.6v * Charge your normal NiMH/NICD Packs: 7.2v, 8.4v, 9.6v, 10.8v, 12v * Charge your High Performance LIPO Packs: 7.4v, 11.1v, 14.8v, 18.5v * Charge your Airsoft NiMH/NICD Packs: 8.4v, 9.6v, 12v * Charge your Airsoft LIPO/LiFe Packs Future proof yourself for any new battery pack or upgrades, instead of having constantly buy 1 charger for each type of pack. Note: to charge Mini Airsoft packs, you need a Standard Tamiya to Mini Tamiya Connector which is sold separately. Charger Specifications: DC 11V~15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit. You can also select a extra Wall Plug AC-DC12V/5A Switching Power as a power source. Specification Operating voltage DC 11~18 volts AC 100~240V, 50/60Hz Charge/discharge power max. 50/5 Watts Pb 2~20V Charge current 0.1 to 5.0A Discharg current 0.1 to 1.0A No. of cycle 1 to 5 times Dimension 130x85x33 mm< User's setting-up parameters Battery voltage type LiIo:3.6V, LiPo:3.7V, LiFe:3.3V NiCd Delta-peak voltage sensitivity 1 to 20mV NiMH Delta-peak voltage sensitivity 1 to 20mV Battery temperature cut-off 20 to 80C or OFF Waiting time between charge/discharge 1 to 60 min. Integral timer limit for safety 10 to 720 min.or OFF Maximum charging capacity limit for safety 10 to 9990mAh or OFF Key beep and buzzer sound ON/OFF Input DC power low alert 10 to 11V ###Please do NOT use this charger with any pack that doesn't have a built-in protection circuit board/module (PCB/PCM)

  • UPC: 793631761166
  • ASIN: B00466PKE0
  • Brand: Tenergy
  • Manufacturer: Tenergy

Traxxas 2970 EZ-Peak Plus 4-Amp NiMH/LiPo Fast Charger with iD Auto Battery Identification

Traxxas 2970 EZ-Peak Plus 4-Amp NiMH/LiPo Fast Charger with iD Auto Battery Identification

The Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus (#2970) does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Plus' Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. 4-amp fast charging and advanced high-resolution peak detection deliver a perfect charge every time. The EZ-Peak Plus is backed by the Traxxas Lifetime Electronics Warranty for years of reliable service.

  • UPC: 020334297006
  • ASIN: B00OAFYLJC
  • Brand: Traxxas
  • Size: Basic pack
  • Manufacturer: Traxxas

La Crosse Technology BC700-CBP Alpha Power Battery Charger

La Crosse Technology BC700-CBP Alpha Power Battery Charger

The La Crosse Technology BC700 Alpha Power Battery Charger has four modes and charges all NiCd and NiMH AA and AAA rechargeable batteries. The four modes include charge, discharge (discharges the batteries and then recharges them), recharge (discharges and recharges up to 20 times to bring old batteries back to life) and test (displays the battery capacity). BC-700 Battery Charger " Features: • All modes automatically default to 200 mA charge on the BC-700 Battery charger • Charge both AA and AAA rechargeable batteries simultaneously and will charge all Low-Discharge batteries. Sanyo Eneloop, Uniross Hybrio, Nexcell EnergyOn, Accupower Acculoop and other future low discharge batteries. • Hhas Four independent channels - Charges 1, 2, 3 , or 4 rechargeable batteries at a time. • Overheat detection to protect over-charging and LCD shows capacity for each battery when charging is complete • Charge Mode - allows a range of user selectable milliamp settings from 200 to 700 for faster charging times. Within 4 seconds after rechargeable batteries are inserted charging automatically begins at 200mA, or you may select 500, or 700mA charge rates for faster charging times. • Discharge Mode - reduces memory effect by discharging rechargeable battery completely before recharging to full capacity. User selectable. • Refresh Mode - discharges and recharges up to 20 cycles or until rechargeable battery is refreshed to full capacity. User Selectable. • Test Mode- First charges the rechargeable battery to full capacity, then discharges completely to measure rechargeable battery capacity for display in mAh or Ah, and then recharges each rechargeable battery to full battery capacity. • UL approved, BC 700 charger also has safeguards that sense rechargeable battery polarity, rechargeable battery temperature and defective rechargeable batteries. • World Voltage capable - Operates on 100~240V AC Input.

  • UPC: 088020902795
  • ASIN: B000RSOV50
  • Brand: La Crosse Technology
  • Size: 1 Pack
  • Manufacturer: La Crosse Technology

ANTRobut Replacement for DC9096 Battery 3500mAh Replace for Dewalt 18V Battery & Dewalt Charger 18V DC9310 for Dewalt 7.2V 9.6V 12V 14.4V 18V Ni-Cad Ni-Mh DC DW XRP Series Dewalt Battery and Charger

ANTRobut Replacement for DC9096 Battery 3500mAh Replace for Dewalt 18V Battery & Dewalt Charger 18V DC9310 for Dewalt 7.2V 9.6V 12V 14.4V 18V Ni-Cad Ni-Mh DC DW XRP Series Dewalt Battery and Charger

ANTRobut Replacement for DC9096 3500mAh Replace for Dewalt 18V Battery and DC9310 Charger for Dewalt 7.2V 9.6V 12V 14.4V 18V Ni-Cad Ni-Mh DC DW XRP Series Batteries Package Include: 1 Pack 3.5Ah replace for Dewalt 18v battery 1 * Charger DC9310 for DEWALT 7.2V-18V NiCad & NiMh Battery DW9057 DC9071 DC9091 DC9096 About charger: Compatible with Battery Model: (Please use Ctrl + F to search) Not Lithium -ion Battery For DEWALT 7.2V NiCad & NiMh Battery DE9057, DE9085, DW9057 For DEWALT 12V NiCad & NiMh Battery 152250-27, 397745-01, DC9071, DE9037, DE9071, DE9072, DE9074, DE9075, DW9071, DW9072 For DEWALT 14.4V NiCad & NiMh Battery DC9091, DE9038, DE9091, DE9092, DE9094, DE9502, DW9091, DW9094 For DEWALT 18V NiCad & NiMh Battery DC9096, DE9039, DE9095, DE9096, DE9098, DC9098, DW9096, DW9095, DW9098 About Battery: Battery for Dewalt Replace PN: For Dewalt DC9096,DC9098,DC9099,DC9198,DC9181,DW9096,DW9098,DW9099,DW9095 DE9098,DE9039,DE9503,DE9095,DE9096 Replacement Battery for Dewalt Compatible Model: (Please use "Ctrl+F) DC020,DC212,DC212B,DC212KA,DC212KB,DC212KZ,DC212N,DC213KB,DC330,DC330B,DC330K,DC330KA,DW990, DC330KB,DC330N,DC380KA,DC380KB,DC380N,DC385,DC385B,DC385K,DC390,DC390B,DC390K, DC390KA,DC390KB, DC390N,DC410,DC410KA,DC410KB,DC410N,DC411B,DC411KA,DC411KL,DC490B,DC490KA,DC495B,DC495KA,DC515B,DC515K,DC515N,DC520KA,DC527(FlashLight),DC530KA,DC545K,DC668KA,DC720KADC729KA,DC759,DC759KA,DCD950 DC759KB,DC820B,DC820KA,DC820KB,DC821KA,DC823B,DC823KA,DC825B,DC825KA,DC825KB,DC920KA,DC925, DC925KA,DC987KA,DC987KB,DC988,DC988KA,DC988KB,DC988VA,DC989KA,DC989VA,DC998KB, DCD690KL,DW936, DW936K,DW938,DW938K,DW959K-2,DW960,DW960B,DW960K,DW960K-2,DW987,DW987KQ,DW988,DW988KQ, DW989,DW995,DW997,DW997K-2,DW999,DW999K,DW999K-2,DW999K2H,DW999KQ,DC970,DW9578

  • UPC: 192589971762
  • ASIN: B07NPLV4PF
  • Brand: ANTRobut
  • Manufacturer: ANTRobut

EBL Smart 8 Bay AA AAA NiMH NiCD Rechargeable Battery Charger

EBL Smart 8 Bay AA AAA NiMH NiCD Rechargeable Battery Charger

Model: EBL-C808 Latest Version Features: LED display the charging statues: shows orange(charging) - shows green(full charged). Controlled by MCU, automatically stop charging when detecting improper input voltage, defective or short circuit or non rechargeable batteries. Using -∆V intellectual cut-off charging method, automatically turn to trickle charge, prevent the batteries from over-voltage, over-current or over-heat. Compatible: Can both charge AA and AAA Ni-MH Ni-Cd rechargeable batteries(Do not charge alkaline or Lithium batteries) How many batteries can be charged at a time: 2/4/6/8 AA or AAA batteries together at a time, need to charge batteries in pairs, do not charge uneven amount of batteries 4 LEDs show the status of charging, never charge 1 AA + 1 AAA together at 2 slots which are controlled by 1 LED Charging Time Table: 2 to 8 pcs AAA 500-1200mAh: 3 - 8 hours(180mA output) 2 to 8 pcs AA 1300-2800mAh: 6 - 15 hours(200mA output) Attention: * Please ensure the battery installed is correct: make the +/- pole of the battery is match for the +/- pole of the charger. * Never mix charge different type and different capacity of batteries under the same LED indicator. * Using environment: 0℃ to 40℃, it is normal phenomenon that the battery is warmer than room temperature when charging. * Do not disassemble or reassemble the charger by yourself for safety reason. Portable and Lightweight: Dimensions: 6.9 x 3.0 x 1.0 inch Weight : 6.0 oz.

  • UPC: 740528465744
  • ASIN: B00EB7812C
  • Brand: EBL
  • Size: 8-Bay in-pair Charger
  • Manufacturer: EBL