iBoost 800 Stereo Line Level Audio Amplifier Booster Amp for MP3, iPod, iPad, iPhone

iBoost 800 Stereo Line Level Audio Amplifier Booster Amp for MP3, iPod, iPad, iPhone

The iBoost 800 was designed to solve an increasingly annoying issue, how to get a quality line level audio output from a portable or computer device that is as high as the audio output typically found with a good CD player. Most MP3 players (including iPodsTM) output a signal through the headphone jack that is suitable for headphones, but not quite for your stereo receiver, home theater system, DJ mixer etc. When plugging these devices into a home audio system, the flaw is easily noticed. The iBosst 800 brings the audio output level of these small devices up to a level suitable for your particular audio equipment. Increases the line level output by up to 20dB for any audio component with an inherently low level output, such as that found with the headphone output jack of an MP3 player, iPodTM, iPadTM, iPhoneTM, computer sound card, etc. Is also a great solution for boosting audio levels on turntables equipped with low level output cartridges when used in series with a phono preamplifier. Other applications the iBoost 800 is suitable for is the addition of a volume control between a line level source and a power amp which has no output volume adjustment of its own. Also for providing the gain needed to drive a long cable when connecting a TV's audio output to a stereo located a long distance away. Simply connect the line level output on your source device to either the 3.5mm stereo input jack on front panel or the RCA inputs on the rear. DIN IN/OUTPUTS jacks are also provided in the rear panel. Connect the output of the iBoost 800 to your amplifier, receiver, or whole-house audio controller, etc. Increase volume up to 20dB by adjusting the rotary volume control on front panel clockwise. When utilizing the front 3.5mm stereo input jack, the rear RCA inputs will be bypassed. Package Contents: iBoost 800 Line Level Amplifier, 12VDC US Power Adapter, 3.5mm Stereo to RCA adapter, 3ft Stereo RCA patch cable.

  • UPC: 092145298152
  • ASIN: B00CVDN2O0
  • Brand: iBoost 800
  • Manufacturer: Generic

8-Port Bi-Directional Cable TV HDTV Amplifier Splitter Signal Booster

8-Port Bi-Directional Cable TV HDTV Amplifier Splitter Signal Booster

If you are having cable TV picture problems this may be the product for you. This product will improve your cable TV picture and reduce pixilation, snow, and audio drop-outs that are caused by a weak signal level. It is compatible with all cable TV systems and services. You may or may not notice a difference in cable modem speed when using the amplifier. A number of factors influence cable modem speed, and there is no guarantee a booster will improve modem performance. If you are boosting an HDTV antenna signal, you should get the best HD antenna you can afford BEFORE using a booster. This signal amplifier IS NOT a substitute for a good antenna. If you are using an indoor antenna or are having HD reception problems with just a single TV attached to your outdoor antenna, this product will likely not improve your reception. It is NOT compatible with satellite TV, and will actually block satellite reception - so do not order it if you have satellite TV.

  • UPC: 811286010177
  • ASIN: B00695G11M
  • Brand: PCT
  • Manufacturer: PCT

Arris 4-Port Cable, Modem, TV, OTA, Satellite HDTV Amplifier Splitter Signal Booster with Active Return And Coax Cable Package - cableTVamps

Arris 4-Port Cable, Modem, TV, OTA, Satellite HDTV Amplifier Splitter Signal Booster with Active Return And Coax Cable Package - cableTVamps

The BDA Broadband Telecommunications Drop Amplifier is a two-way 1Ghz Amplifier. Its is designed for Customer Amplification. The Arris BDA-42-4-AR-R is a 4-Port Amplifier that can be used to compensate for long drops and excessive splitting losses. The BDA-42-4-AR-R is housed within a robust aluminum die cast housing and utilizes the Arris FFT Auto-Seize F-Connector for maximum reliability. An Active Return Path is provided for continuity. The BDA-42-4-AR-R is and upgrade and replaces the former K-4 1-Port Signal Amplifier. The BDA-42-4-AR-R is fully compatible with all cable TV standards, cable boxes, cable modems, routers, HDTV and more. Active return may not fix all of your problems if the product is not installed properly - or if the incoming cable signal is not problematic. Includes Coax Cable And Detailed Installation Instructions

  • UPC: 851815008046
  • ASIN: B0792MVBB3
  • Brand: Arris
  • Manufacturer: Arris

Arris 4-Port Bi-Directional Cable TV, OTA, Satellite HDTV Amplifier Splitter Signal Booster with Passive Return And Coax Cable Package - cableTVamps®

Arris 4-Port Bi-Directional Cable TV, OTA, Satellite HDTV Amplifier Splitter Signal Booster with Passive Return And Coax Cable Package - cableTVamps®

The BDA Broadband Telecommunications Drop Amplifier is a two-way 1Ghz Amplifier. Its is designed for Customer Amplification. The Arris BDA-42-4-PR-R is a 4-Port Amplifier that can be used to compensate for long drops and excessive splitting losses. The BDA-42-4-PR-R is housed within a robust aluminum die cast housing and utilizes the Arris FFT Auto-Seize F-Connector for maximum reliability. The BDA has built-in duplex filters for two-way operation. A Passive Return Path is provided for continuity and enables the use of multiple (up to 4) broadband devices. The BDA-42-4-PR-R is and upgrade and replaces the former S-4 4-Port Signal Amplifier.

  • UPC: 851815008022
  • ASIN: B0792P8SP1
  • Brand: cableTVamps
  • Manufacturer: Arris

Electroline EDA-2800 8-Port Cable TV HDTV Signal Booster/Amplifier (Retail Package with 5-Year Warranty)

Electroline EDA-2800 8-Port Cable TV HDTV Signal Booster/Amplifier (Retail Package with 5-Year Warranty)

Maximize the performance of your off-air/cable distribution network with an Electroline EDA 2800 amplifier. The EDA 2800 is designed to boost an incoming signal by 4 dB over 8 ports.

  • UPC: 853016001086
  • ASIN: B000F3NOPK
  • Brand: Electroline
  • Manufacturer: Electroline

4K2K 1080P 3D HDMI Booster, JerGO HDMI 2.0 Signal Amplifier Repeater Boost Up to 200ft Transmission Distance 18Gbps Bandwidth for HDTV,PS4, Oculus and More (HDMI 2.0)

4K2K 1080P 3D HDMI Booster, JerGO HDMI 2.0 Signal Amplifier Repeater Boost Up to 200ft Transmission Distance 18Gbps Bandwidth for HDTV,PS4, Oculus and More (HDMI 2.0)

Perfect solution for amplifying HDMI signal. Plug and use, no more adapters needed. HDMI 2.0 version repeater works great with long HDMI cables. HDMI 2.0 24AWG cable input resolution 4K/60Hz, RGB 4:4:4, both input and output transmission distance are up to 15 meters (30 meters in total)  HDMI 2.0 24AWG cable input resolution 4K/30Hz, RGB 4:4:4 or 4K/60Hz RGB 4:2:0, both input and output transmission distance are up to 20 meters (40 meters in total) HDMI 2.0 24AWG cable input resolution 1080P/60Hz, both input and output transmission distance are up to 30 meters (60 meters in total) Specifications: 1. HDMI 2.0 Repeater ( backwards compatible with HDMI lower version ) 2. HDMI Bandwidth and transmission rate: 300MHz / 18Gbps 3. Interfaces: 1xHDMI input, 1xHDMI output, 1xDC power input 4. Max working current: 300mA 5. Dimensions: 55*45*25mm 7. Material: Metal 8. Operating Temperature: -10℃-55℃  9. Storage Temperature: -20℃-60℃ Package Include: 1 x HDMI 2.0 Repeater

  • UPC: 791688519846
  • ASIN: B07M7V5LKZ
  • Brand: JerGO
  • Size: HDMI 2.0
  • Manufacturer: JerGO

Winegard LNA-200 Boost XT HDTV Preamplifier, TV Antenna Amplifier Signal Booster, HD Digital VHF UHF Amplifier

Winegard LNA-200 Boost XT HDTV Preamplifier, TV Antenna Amplifier Signal Booster, HD Digital VHF UHF Amplifier

Winegard LNA-200 Boost XT TV Preamplifier, VHF UHF Amplifier Extend the range and signal quality of your non-amplified digital HDTV antenna with a Winegard TV antenna preamplifier. Winegard's ultra low-noise amplifiers offer maximum signal quality. Watch more free shows than ever before! Boost Clear Circuit Technology features the lowest noise figure (1 dB typical) to deliver more range and reduce signal dropout and pixelation. The Boost XT enhances any non-amplified antenna! TwinAmp Technology separately amplifies VHF and UHF signals. This separation of bands increases signal handling capability for up to 10 times more and reduces intermodulation, thereby maintaining the purest signal path possible. Size, Compatibility and Features Dimensions: 6in x 4in x 4.8in TwinAmp Technology separately amplifies VHF and UHF signals 10x more power handling Bandpass filters remove interfering RF signals Installs on any outdoor non-amplified TV antenna Maximum Gain (typical): 20 dB Noise Figure (typical): 1dB Power: +5V at 130mA In The Box LNA-200 Boost XT Preamplifier 110V Adapter, Power Inserter, Hose Clamps Printed Documentation Note:  Using an amplifier does not guarantee you will pick up more TV channels even though your signal is amplified. The TV channels available in your area depends on many things - such as location of TV towers, building materials and the actual antenna being used. What the amplifier will do, is help to distribute the signal that you do get to your TV, overcoming loss from the coax cable or the loss associated with splitting the signal to multiple TV’s. A new channel scan must be done on the TV if the antenna has moved or if an amplifier has been added.

  • UPC: 012301815429
  • ASIN: B00DQN3R9O
  • Brand: Winegard
  • Size: apple
  • Manufacturer: Winegard Company

ANTOP Smartpass Amplifier TV Signal Booster for Any Non-Amplified TV Antenna, High Gain & Low Noise & Built-in 4G LTE Filter,Amplify VHF and UHF Signals, Included USB Power Adapter and 5ft USB Cable

ANTOP Smartpass Amplifier TV Signal Booster for Any Non-Amplified TV Antenna, High Gain & Low Noise & Built-in 4G LTE Filter,Amplify VHF and UHF Signals, Included USB Power Adapter and 5ft USB Cable

Tips 1.AT-601B must be powered for function. It can be powered via USB cable by connecting to any USB-port supporting 5V output. A USB AC/DC power adapter is included in package. 2.Re-scan the channels after each switching of the Smartpass Amplifier. 3.Scan channels monthly to find all available channels including newly added or changed. 4.Do not place or hide the Smartpass Amplifier in/behind any metallic objects. 5.Keep the antenna away from any high power consumption devices to avoid interference. Product Information Power Supply: DC 5V/50mA Size: 2.90x1.26x0.70in TO TV: 3ft Extension Coaxial Cable Attached with F-male Connector TO Antenna: 0.3ft Extension Coaxial Cable Attached with F-female Connector Frequency Range: 87.5-700MHz Receiving Range: FM/VHF/UHF Gain: 16dB Max Impedance: 75Ω Noise figure: ≤2dB Power Supply: DC5V/50mA What's in the box 1* AT-601B Smartpass Amplifier and Power Supply Kits 1* 5V USB AC/DC Power Adapter 1* 5ft USB Cable 1* Instruction/User Manual

  • UPC: 601706382737
  • ASIN: B07GRT8DW7
  • Brand: ANTOP
  • Size: Black
  • Manufacturer: ANTAN

GE Indoor TV Antenna Amplifier, Antenna Signal Booster, HD TV Digital VHF UHF, Low Noise, AC Power Adapter, Black, 42178

GE Indoor TV Antenna Amplifier, Antenna Signal Booster, HD TV Digital VHF UHF, Low Noise, AC Power Adapter, Black, 42178

A better signal means better TV with the GE indoor antenna amplifier. Increase your reception quality by strengthening the signal from channels in your area. Low-noise amplification improves Signal-to-Noise ratio and compensates for cable loss to offer a superior viewing experience. Compatible with all brands, The amplifier connects to the coax cable from your antenna and directly into your TV. It improves VHF and UHF reception and boosts HD broadcast signals for digital television. The amplifier is perfect for any indoor passive antenna and sets up easily using the included AC power adapter. Seeing is believing with the GE indoor antenna amplifier.

  • UPC: 030878421782
  • ASIN: B07NF6JYJV
  • Brand: GE
  • Manufacturer: Jasco

4 Port Cable TV/HDTV/Digital Amplifier Internet Modem Signal Booster Internet AMP PCT-MA2-4PN

4 Port Cable TV/HDTV/Digital Amplifier Internet Modem Signal Booster Internet AMP PCT-MA2-4PN

This is a brand new, four (4) port cable television drop amplifier, just like the ones that your local cable company uses to correct their system's shortcomings. This new model packs a powerful punch in a compact, easy-to-install package! By connecting these fantastic signal boosters to the drop cable coming in from the street, you can increase the signal strength entering your home by up a whopping +7 db per port! If you have multiple televisions or run a cable modem for your internet, this product is recommended. By having four ports come directly off of the amplifier, there is no need for additional splitters, which reduce signal strength. If you are tired of tv pictures that don't seem as clear as they should be, dropped internet connections, or just desire a reliable amplifier to give continuous, steady signal to your home or business, this is for you!

  • UPC: 641589535639
  • ASIN: B001EKCGT8
  • Brand: PCT
  • Manufacturer: PCT