Stud Finder Sensor Wall Scanner - 4 in 1 Electronic Stud Sensor Beam Finders Wall Detector Center Finding with LCD Display for Wood AC Wire Metal Studs Joist Detection

Stud Finder Sensor Wall Scanner - 4 in 1 Electronic Stud Sensor Beam Finders Wall Detector Center Finding with LCD Display for Wood AC Wire Metal Studs Joist Detection

Whether you're hanging a picture,mounting a TV,renovating part of your home, or working as a professional contractor, you need to know what is on the other side .Tavool stud finder is one of those tools that you will eventually need. Tavool stud finder can be the difference between a successful DIY home project and disaster. ➤Tavool stud beam finder is a device that is used to determine exact location of framing studs that are located behind the drywall. This Multi-scanner stud finder uses electronic signals to quickly locate edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings. ➤The wall detector features large LCD display, ergonomic design and multi-sense technology for accurate detection of both metal and wooden studs. It will also detect live wiring up to two inches into walls. The four scanning modes (stud scan, deep scan, metal scan and AC scan) make it ideal for both tradesmen and home carpenters. With this device, you can immediately find a suitable place on the wall without making any extra holes The cost of a stud finder wall scanner will almost always be less than the cost of repairing the damage done from not locating one before hanging something. ➤Nabini stud finder has changed the brand to "Tavool".ADD TO CART AND START YOUR PROJECT SAFE! How to use an electronic stud finder detector? Step 1: Install the 9v battery (not included in the package) & choose the mode. Step 2: Place the device flat on the wall. Then press and hold the button while keeping the unit still until calibration is complete (1-2 seconds). When calibration is complete, the unit will sound a short beep and the display bars will be cleared. Step 3: While holding on the button, move it along the desired surface to scan. Step 4 : When the stud finder detects an object, it will beep continually and will display on the LCD screen.

  • ASIN: B07F6RZM43
  • Brand: Tavool
  • Size: Small
  • Manufacturer: Tavool

Stud Finder Sensor Wall Scanner - 5 in 1 Electronic Stud Sensor Locator Wall Wood Beam Joist Finders Wall Detector Edge Center Finding with LCD Display for Wood Live AC Wire Metal Studs Detection

Stud Finder Sensor Wall Scanner - 5 in 1 Electronic Stud Sensor Locator Wall Wood Beam Joist Finders Wall Detector Edge Center Finding with LCD Display for Wood Live AC Wire Metal Studs Detection

Whether you are hanging pictures, putting up a new set of shelves or getting ready to start an addition, knowing where the studs are in a wall can be extremely handy! Tavool Stud Finder is the best choice for locating the studs/metal/ac wires preciously and quickly! Tavool stud finder works by detecting density changes in a wall. Tavool wood stud finder adopts the UPGRADE SENSORS to get the greatest accuracy. Moreover, Tavool wall scanner can also help you avoid drilling or hammering into a water pipe or electrical wire Before there were stud finders, people have 2 methods to find the stud : 1. Pounded a small nail into the wall until you hit a stud; 2. Use a small pivoting magnet. However, the first one damages the wall and the second magnet technique is slow. The Electronic stud finders changed all that. Tavool Electronic stud finders gives you an amazingly accurate view into the wall and show you exactly where each stud is. Follows are the advantages of Tavool TH510 stud finder over the normal stud finders in the market: 1.Great accuracy/reliability/consistency 2.Identifies the width of stud as well as the location 3.Easy to read screen and the quick identifiers when you hit a stud 4.Increases the sensitivity to more than 2 inches 5.Upgrade model with 5 scanning modes to meet different needs Tavool stud finder is perfect for normal scanning of drywalls and finding joists, beams, and studs in almost all types of stud walls, for example, finding studs on drywalls, plaster wall, finding the beams in the ceiling, floor, locating metal behind walls or other surfaces, even locating metal/screws behind tiles. Give it a try and you will get your homework more easier! (Please note: The 9v battery is not included in the package)

  • ASIN: B07NWMBB6N
  • Brand: Tavool
  • Manufacturer: Tavool

INTEY Stud Detector Electric Cable Detector AC Wire Detector Stud Finder for Walls 3 in 1 Wood Wall Scanner with Center Finding Metal Stud Sensor

INTEY Stud Detector Electric Cable Detector AC Wire Detector Stud Finder for Walls 3 in 1 Wood Wall Scanner with Center Finding Metal Stud Sensor

INTEY Stud Finder for Walls: INTEY's stud wall detector helps to find the stud center and edges, accurately locates metal pipes, live wire, stud, wood and joists which hidden behind walls, floors and ceilings.WHY YOU SHOULD BUY THIS WIRE DETECTOR:✓Locates stud center and edges✓locates metal and wood parts✓AC scan mode for live wire tracing Metal scan mode for nail, pipe, and hidden metal objects detecting✓Auto power-off within 3 minutes (If there's no operation )✓Backlit screenSTEPS1、Choose the correct mode according your needed: stud, metal or AC wire2、Get it calibrated before using3、Move slowly to find objects4、Beep sound and center column will tell you where the center is.5、Email our Support Team if you confused about the operation, and we will reply within 12-24 hours(Email address was on User manual )DETECTION CAPABILITY:Stud :1.5-inch behind wallAC live wire: 2-inchMetals: 3-inchPower Supply: 1 x 9V battery( Not included)Package Content*Stud finder*User manual*24 month WarrantyNOTEIt's hard to detect live wire which close to earth wire. It can't work on lath & plaster walls; Item's rusty condition may affect probing results; Detection depth can vary due to wall moisture, wall texture, paint, etc. There're 3 different depths for choosing in Stud Mode, and "1 and a half" Mode is most suggested.

  • UPC: 680491007131
  • ASIN: B07CTFHV6C
  • Brand: INTEY
  • Manufacturer: INTEY

Kamtop Wall Stud Finder 4 in 1 Electric Wall Scanner AC Wire Cable Detector Sensor

Kamtop Wall Stud Finder 4 in 1 Electric Wall Scanner AC Wire Cable Detector Sensor

Description: It has 4 detector modes: 1. Stud Scan Mode: Locate the edge of metal and wood stud in normal walls up to 3/4 inch (19mm). 2. Locate the edge of metal and wood stud in normal walls up to 11/2 inch (38mm). 3. Metal Scan Mode: Locate the metal such as iron, copper and aluminum pipe up to 2.36inch (60mm). 4. AC Wire Scan Mode: Locates the AC wire up to 2 inch (51mm). This detector comes with a audio and visual indication which allows you to make a mark easily when the metal, AC live wire and stud is detected. And the LCD screen is easy to read for the backlight. It can avoid unnecessary losses when you want to dig a hole to hang a picture or install shelves and so on by locating hidden metal pipes, live wire, stud and wooden frames accurately. Features: It is used to detect the central position of metal or wooden stem in the wall. In addition, it can detect the metal and voltage in the wall, and whether the wires in the wall are charged, etc. Can detect wood metal stem with the wall thickness less than 1 inch 11/2 inches (38 mm). The metal pipe can be detected with the wall thickness less than 2.36 inches (60 mm). It can detect live wire inside walls with the wall thickness less than 2 inches (51 mm). All detection functions have automatic correction function. Automatic Power OFF: when there is no operation or no object is scanned, it will be powered off in about 3 minutes. Display: low battery indication and beep indication. Specifications: Size: 167*75*39mm/6.57*2.95*1.5" Material: ABS Working current:

  • ASIN: B07QDRPQ64
  • Brand: Kamtop
  • Manufacturer: Kamtop

Stud Finder Wall Scanner - 4 in 1 Electric Multi Function Wall Detector Finders with Digital LCD Display, Center Finding Stud Sensor & Sound Warning for Studs/Wood/Metal/Live AC Wires Detection

Stud Finder Wall Scanner - 4 in 1 Electric Multi Function Wall Detector Finders with Digital LCD Display, Center Finding Stud Sensor & Sound Warning for Studs/Wood/Metal/Live AC Wires Detection

A good stud finder can be the difference between a successful DIY home project and disaster. When hammering or screwing things into walls, ceilings, and floors, you need to know what is on the other side. Otherwise, you might damage drywall or flooring with unsupported items you are trying to install. That is why a stud finder is important. This VIVREAL stud sensor wall scanner includes a backlit LCD graphic screen for low-light conditions and auto-calibration that makes setup a whole lot easier. Electronic Wall Scanner has 4 modes to choose, Stud scan: Locates the center and edges of wood and metal studs up to 3⁄4 in. (19 mm) deep. Deep mode: Locates the center and edges of wood and metal studs up to 11⁄2 in. (38 mm) deep. Metal scan: Detects metal (such as 1⁄2 inch rebar) up to 2.36 in. (60 mm) deep. AC scan: Detects live unshielded AC wires up to 2 in. (51 mm) deep. How to use VIVREAL stud finder? Step 1: Press the button at the left side of device to power it. Step 2: Slide the button on the middle of device to select one scanning mode. Step 3: Place the device flat on the scanning surface. Then press and move it in a stable way. (Note: if you cannot scan the object from left to right, please try to scan up and down.) Step 4: When the objected is found, the device will beep continually and a peck type will appear on the LCD display. Mark it with a pencil. VIVREAL stud sensor has a beep alarm sound to tell you the "center states". The directional indicators and the "center" signal keep users identifying the exact center of the stud, like arrow and edge on Electronic Wall Scanner LCD screen. If you are a DIY home projector or professional contractor, VIVREAL stud finder is what you are looking for.

  • UPC: 785004878069
  • ASIN: B07B9VKWSL
  • Brand: VIVREAL
  • Size: Small
  • Manufacturer: VIVREAL

Walabot DIY - In-Wall Imager - see studs, pipes, wires (for Android smartphones - NOT COMPATIBLE with IPHONE)

Walabot DIY - In-Wall Imager - see studs, pipes, wires (for Android smartphones - NOT COMPATIBLE with IPHONE)

Android compatible only - not compatible with iPhone and several Android devices. Detects studs (metal & wooden), pipes & wires and movement Works on drywall & concrete Sees 4 in / 10 cm deep into your walls Provides 3 different sensing modes – Panoramic, Images and Expert Maps large areas, allows snapshots for offline analysis

  • ASIN: B06Y29NXKK
  • Brand: VAYYAR
  • Manufacturer: Walabot

Stud Finder Sensor Meterk Wall Scanner - 4 in 1 Electronic Center Finder Multi-Functional Wall Finder Detector with LED/Sound Warning for Wood Stud/Metal/Live AC Wire/Moisture Detection

Stud Finder Sensor Meterk Wall Scanner - 4 in 1 Electronic Center Finder Multi-Functional Wall Finder Detector with LED/Sound Warning for Wood Stud/Metal/Live AC Wire/Moisture Detection

Meterk Stud Finder Wall Detector 4 in 1 Wall Center Sensor Wall Scanner Digital Wood Center for Wood Metal Studs and AC Cable Live AC Wire Scanner Warning Detection

  • ASIN: B07RGJBP31
  • Brand: Meterk
  • Size: 19.8 x 10.5 x 4.5 cm
  • Manufacturer: Meterk

Zircon MultiScanner 740 Electronic Wall Scanner with Built-In Erasable Wall Marker/Center Finding and Edge Finding Stud Finder/Metal Detector/Live AC Wire Detection

Zircon MultiScanner 740 Electronic Wall Scanner with Built-In Erasable Wall Marker/Center Finding and Edge Finding Stud Finder/Metal Detector/Live AC Wire Detection

The Zircon MultiScanner 740 center finding electronic wall scanner quickly and easily locates studs, detects metal, locates live, unshielded AC wires and allows you to mark your target. Complete with the latest technology in density detecting software and circuitry, an ergonomic body design, and an erasable marking system. Unlike other wall sensors, scanners and stud finders, the MS 740 is uniquely designed with a "floating head" that keeps the scanning surface level on textured or rough surfaces so results are more accurate. The 4-mode switch makes it easy to change functions while the ultra-bright display screen, dual SpotLite Pointing System, and audio tone all indicate the location of the target. The Signal Strength Indicator helps to distinguish between shallow and deep targets. The MultiScanner 740 also includes ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a low battery indicator to alert its users to replace its battery for optimal performance results. In StudScan mode, the multifunctional 740 locates the center, edges, and direction of wood or metal studs up to 3/4 of an inch (19 mm) deep. Switch over to DeepScan mode and double the scanning depth to 1.5 inches (38 mm). Metal Scan mode of the MS740 provides the ability to locate non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Using Metal Scan mode, studs can be found behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. Additionally, the MS 740 is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using the stud and metal scan modes. To detect, locate, map, and trace the live wires, simply switch over to the AC Scan function which finds and traces live, unshi... [Read More]

  • UPC: 042186673258
  • ASIN: B01AHYDWNK
  • Brand: Zircon
  • Size: Integrated Wall Marker
  • Manufacturer: Zircon

FLY5D 3 In 1 Wire Metal Wood Detectors Stud Finder Sensor Wall Scanner AC Voltage Live Wire Cable Finder Detect Behind Wall LCD Display

FLY5D 3 In 1 Wire Metal Wood Detectors Stud Finder Sensor Wall Scanner AC Voltage Live Wire Cable Finder Detect Behind Wall LCD Display

Specifications:  1. Material: ABS 2.Color: as shown in pic 3.Battery: 6F22 9V DC 4.Wood: 30 x 30mm: ≤18mm 5.Metal detecting depth: pipe diameter 25mm, ≤ 30mm 6.Electrical wires: 90 ~ 250V ≤ 50mm  Package: 1 x Metal Stud Finder  1 x User Manual

  • ASIN: B07V4BVMQ5
  • Brand: FLY5D
  • Manufacturer: STUD

Zerodis UT387B Wall Scanner Detector Digital Handheld Metal Wood AC Cable Detector Stud Finder

Zerodis UT387B Wall Scanner Detector Digital Handheld Metal Wood AC Cable Detector Stud Finder

Specifications: Model:UT387 Maximum Detection Depth: Ferrous Metal( iron pipe with a minimum diameter of 3cm):80mm Nonferrous Metal(aluminum with a minimum volume of 30*2*2cm):80mm Live Wire:50mm Wood(with a minimum volume of 20*16*4cm):20mm Operating Temperature:0℃~40℃ Storage Temperature:-10℃~50℃ Temperature for Guaranteed Precision:18~28℃ Humidity:≤75% Altitude:≤2000m Power Supply:1 * 9V Battery(Not Included) Product Size(appr.):220 * 83 * 35mm / 8.7 * 3.3 * 1.4" Package Weight(appr.):340g Package Included: 1 * UNI-T Wall Detector 1 * Carrying Bag 1 * User Manual Note: Do not clean the meter with detergents or other chemicals.

  • UPC: 763741088095
  • ASIN: B07DVJG9N1
  • Brand: Zerodis
  • Manufacturer: Zerodis