Dual System 2 Stage CO2 Pressure Regulator For Draft Beer Regulators and Kombucha Set Ups. Connect 2 Systems to 1 Tank. CGA-320 Connection

Dual System 2 Stage CO2 Pressure Regulator For Draft Beer Regulators and Kombucha Set Ups. Connect 2 Systems to 1 Tank. CGA-320 Connection

TerraBloom 2 Stage CO2 Regulator is specifically designed for simultaneous use with 2 draft beer/kombucha setups (kegs or fermentation tanks). This CO2 regulator is equipped with 3 gauge displays: 1 for showing the working pressure in your 1st keg or fermentation tank, 1 for showing working pressure in your 2nd keg or fermentation tank, as well as 1 for showing the pressure in your CO2 tank. This regulator attaches to standard North American CO2 gas tanks with a male thread (standard CGA-320 connection). Red knobs on the regulator lets you adjust the working pressure without any additional tools in each individual kegs/fermentation tanks.

  • UPC: 858355007386
  • ASIN: B07D8J7NDC
  • Brand: TerraBloom
  • Size: Dual Keg CO2 Regulator (CGA-320 Inlet)
  • Manufacturer: TerraBloom

Keg Regulator CO2, MRbrew Kegerator Regulator CGA-320, 0-60 PSI Working Pressure, 0-3000 PSI Tank Pressure, Beer Regulator, Co2 Pressure Regulator with Safety Pressure Relief Valve

Keg Regulator CO2, MRbrew Kegerator Regulator CGA-320, 0-60 PSI Working Pressure, 0-3000 PSI Tank Pressure, Beer Regulator, Co2 Pressure Regulator with Safety Pressure Relief Valve

MRbrew Double Gauge CO2 Regulator, which has been specially designed to provide maximum convenience and durability in busy commercial environments like bars, tasting rooms, and restaurants. ★The MRbrew Beer Keg Regulator works with any Co2 Tank with a CGA-320 valve.★Both gauges feature an easy to read design.★The top gauge lets you know how much Co2 Pressure is in the keg and displays 0-60 psi. ★The second gauge lets you know how much Co2 gas is left inside the Co2 Tank and features a 0-3000 display. So you'll never be caught off guard by an empty CO2 tank again.This brewery-grade beer regulator features a multi-stage body for more precise control when making small adjustments to the output pressure.The first stage reduces the output pressure from the tank to a more manageable pressure, and the second stage fine tunes that pressure for output to the kegAllowing adjustments to be optimized for the operational range of beer, wine, coffee or whatever you're dispensing. A large adjustment knob allows you to make quick and accurate adjustments by hand and turns effortlessly, even in freezing temperatures.The regulator body is constructed of forged brass with all brass connections and components, a sintered brass inlet filter, integrated nylon tank connection washer (and spare) and self resetting safety release valve. ★Hose barb end has been designed for use with 5/16" I.D. pressure tubing★5/16" barbed output for use with 5/16" ID hose★Integral safety pressure relief valve releases at 45 PSI★Large hand control makes it easy to adjust the presure inside keg★Inlet nipple has a permanent thick nylon seal that eliminates one source of leaks, so you will not need to use a new fiber washer every time the tank is changed👉 Regulators are all pressure tested to assure reliability in the field🎁 You have 1 Year Warranty Against Manufacturing Defects

  • ASIN: B07JWCSY9H
  • Brand: MRbrew

Taprite T752HP Two Product Dual Pressure Kegerator CO2 Regulator

Taprite T752HP Two Product Dual Pressure Kegerator CO2 Regulator

The TAPRITE ADVANTAGE Taprite regulators are built and tested in accordance with UL Standard 252 for compressed gas Regulators and UL 252A for compressed gas regulator accessories All Taprite regulator components and accessories are inspected by our Quality Department upon receipt in accordance with the requirements of MIL-STD-105E High CO volumetric flow provides continuity in product dispensing Polycarbonate bonnet will not chip, break, or fade 10 Micron Filter built in to keep contaminants out of regulator One repair kit for primary and secondary regulators. WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.

  • UPC: 608938598721
  • ASIN: B0060NOX40
  • Brand: Taprite
  • Manufacturer: Taprite

Taprite Co2 Primary Beer Regulator 3741-BR New Draft Wine Soda - Dual High Pressure Gauge

Taprite Co2 Primary Beer Regulator 3741-BR New Draft Wine Soda - Dual High Pressure Gauge

(WARNING: THIS PRODUCT CAN EXPOSE YOU TO CHEMICALS, INCLUDING LEAD, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS AND REPRODUCTIVE HARM. FOR MORE INFORMATION PLEASE VISIT: WWW.PROP65WARNINGS.CA.GOV) Primary Beer Regulator, 1P1P, CGA320 Inlet, 5/16\\" Barb Shut off w/Check, 60 PSI and 2000 PSI Gauges

  • UPC: 731157856164
  • ASIN: B00PZM6H7S
  • Brand: Taprite
  • Manufacturer: Taprite

TapRite Separate Pressure Adjusting 2 Product CO2 Regulator

TapRite Separate Pressure Adjusting 2 Product CO2 Regulator

WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING. Tap two kegs at the same time and control the pressure to each of them individually. This two product two pressure CO2 regulator has two separate gauges to uniquely measure the pressure to each keg and allow you to adjust it particularly for the type of beer or beverage you are drinking. A third gauge tells you the amount of CO2 left in your tank. Regulator attaches directly to CO2 tank and has an air shut off switch for each CO2 line. Nonadjustable shut down blows off at 55-65 PSI. The polycarbonate bonnet is lighter weight and stronger than zinc bonnet regulators and it will not corrode in wet environments. No special tools are required to raise or lower the CO2 pressure. The cap knob simply pulls out so it can be turned to adjust pressure up or down then pushes back in to lock in pressure. In stock and ready to ship. Features: Tap two kegs at the same time and control the pressure to each. 0-60 Gauges measure pressure to each keg. 0-2000 Gauge measures CO2 in tank. Has air shut off switch for each CO2 line. High CO2 volumetric flow to insure continuity in product dispensing. Bonnet material is glass-filled Polycarbonate. 10 Micron filter built in to keep contaminants out of regulator. Less prone to freeze up problems. Approved by Pepsi and Coca-Cola. Specs: dimensions: 9\inchW x 7 1/2\inchH x 5 1/2\inchD.

  • UPC: 845033087556
  • ASIN: B002QAP6JC
  • Brand: Taprite
  • Size: 12"x8"x8"
  • Manufacturer: Learn To Brew

Taprite T742HP Primary Double Gauge CO2 Regulator, Brass

Taprite T742HP Primary Double Gauge CO2 Regulator, Brass

WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING. You can use this low-pressure regulator on any CO2 tank with a CGA-320 valve. CO2 tanks have a male thread (CGA-320); these regulators have a female thread. This regulator features dual gauges to measure psi as well as the volume of CO2 in the cylinder, indicating how much CO2 is left in the cylinder and when you should have it refilled. The knob on the front is used to adjust the output pressure. The red polycarbonate bonnet will not chip, break or fade. There is a non-adjustable shut down built into the body of the regulator. The high-pressure ports have left-hand female threads to prevent their use as a low-pressure outlet. The non-removable adjusting screw is designed so that when it is turned all the way in the maximum downstream delivery pressure will not exceed 50psi, with a safety blow off at 60psi. Internal relief valve opens whenever delivery pressure exceeds set pressure by 15psi. This feature serves as a warning that the seat or diaphragm may be worn or damaged and should be replaced. Sintered metal flow control filter in the inlet nipple to prevent dirt and other particles from damaging internal regulator parts. The permanent Quad-Ring Seal on the inlet nipple helps eliminate a source of leaks, so there is no need to use a new fiber washer each time the tank is changed. Outlet features NADS 1600C shutoff which eliminates a source of gas leaks. The duck bill check valve helps prevent product back up into the regulator, a common cause of malfunction in the regulating and relief valve parts. Hose barb end designed for use with 5/16 inch I.D. pressure tubing. All regulators are pressure tested to assure in-field reliability. The seat assembly is easily replaceable, so there is no need to remove the regulator from the tank. Bullets change to: Low pressure gauge (the top gauge) indicates... [Read More]

  • UPC: 608866314523
  • ASIN: B002UZUJ22
  • Brand: Taprite
  • Manufacturer: Taprite

Kegco KC LH-542 Premium Pro Series Dual Gauge Co2 Draft Beer Regulator, Chrome

Kegco KC LH-542 Premium Pro Series Dual Gauge Co2 Draft Beer Regulator, Chrome

The Kegco 542 Pro series works with any Co2 Tank with a CGA-320 valve and measures PSI, as well as the volume of the Co2 gas in the Cylinder. The regulator body is constructed of forged brass with all brass connections and components, a sintered brass inlet filter, integrated nylon tank connection washer (and spare) and self resetting safety release valve. Both gauges feature an easy to read design. The top gauge lets you know how much Co2 Pressure is in the keg and displays 0-60 psi. The second gauge lets you know how much Co2 gas is left inside the Co2 Tank and features a 0-2000 display. A large adjustment knob with a lock ring allows gas flow to be changed without the need for a screw driver. This regulator includes a tamper proof safety pressure relive valve that releases at 45 psi. There is also a shut off valve that allows for instantly shutting off pressure to the keg without backing up your gas line.

  • UPC: 797734448535
  • ASIN: B003WX772G
  • Brand: Kegco
  • Size: Pack of 1
  • Manufacturer: Kegco

FERRODAY Dual Gauge CO2 Draft Beer Regulator Dual Stage Pressure Regulator CGA-320 CO2 Tank Beer Kegerator Regulator with Relief Valve Beer Keg Pressure Regulator for Homebrew 0-60 PSI 0-3000PSI

FERRODAY Dual Gauge CO2 Draft Beer Regulator Dual Stage Pressure Regulator CGA-320 CO2 Tank Beer Kegerator Regulator with Relief Valve Beer Keg Pressure Regulator for Homebrew 0-60 PSI 0-3000PSI

This is a FERRODAY PROFESSIONAL GRADE dual gauge CO2 regulator used for draft beer setups, fits all standard CO2 tanks with CGA-320 inlets. Functioned flawlessly to control and monitor both the output pressure and the cylinder pressure at the same time. The high pressure gauge for cylinder reads between 0-3000 psi and the lower pressure gauge for output reads between 0-60 psi. Features:●Heavy duty unit for long term use; ●High-contrast writing for easy reading; ●Manual blow off release valve designed for safety concerns; ●Big ergonomic adjust knob for precise pressure adjustments; ●2 durable tank washers form a tight seal for leakage proof connection; ●Built-in Sintered brass inlet filter keeps harmful contaminants out of the regulator for safety! Package:1 x CO2 Regulator 2 x Tank Washer 2 x ClampPlease feel free to contact us if any problems, we would try our best to serve you!

  • UPC: 720226088568
  • ASIN: B07VFB6HWS
  • Brand: Ferroday
  • Size: CGA-320

Gentec 227C-150 Flow Regulator for Light Duty Applications

Gentec 227C-150 Flow Regulator for Light Duty Applications

GENTEC 227C-150 flow regulators are designed for light duty applications using carbon dioxide (CO2) or nitrogen (N2). Preset delivery pressure setting: 150 PSI. "Piston" type mechanism for reliability. Body machined from class "A" brass bar stock. Sintered bronze inlet filter. 1/4" NPT outlet port.

  • UPC: 743043016811
  • ASIN: B0085EVSOU
  • Brand: GTC Direct
  • Manufacturer: Genstar Technologies

CO2 Pressure Regulator CO2 Pressure Reducer Dual Gauge Gas Bottle Regulator Carbon Dioxide Welding Pressure Reducer

CO2 Pressure Regulator CO2 Pressure Reducer Dual Gauge Gas Bottle Regulator Carbon Dioxide Welding Pressure Reducer

This CO2 pressure reducer is made of high quality brass with a durable construction. The rated flow is 36m3/h, mainly used for welding, cutting, chemical industry, medical and health, electronic industry, etc. Equipped with two gauges, you can easily read the pressure. Specifications: Material: Zinc alloy + brass Applicable medium: Carbon dioxide Measuring range: 0-1MPa, 0- 25MPa Big cap thread: G5/8 Outlet nozzle: 8mm Size: 14.5 x 14cm / 5.71 x 5.51in Weight: 762g Package included: 1x CO2 Pressure Regulator

  • UPC: 792117496493
  • ASIN: B07HRP9KSX
  • Brand: Wal front
  • Manufacturer: Wal front