C.R. LAURENCE F0M012 CRL Handi-Foam II Kit - 1 Cubic Foot
C.R. LAURENCE F0M012 CRL Handi-Foam II Kit - 1 Cubic Foot
CRL Handi-Foam® II is a totally portable system used for the application of polyurethane foam for sealing and insulation jobs. Portable kit includes the dispensing hose and nozzles. The dispensing guns all have a metering system to control the flow and spray, reducing waste and over spray.
- ASIN: B001Q5JSMY
- Brand: CRL
- Manufacturer: CRL
3/8" Closed Cell Backer Rod - 100 ft Roll
3/8" Closed Cell Backer Rod - 100 ft Roll
CRL Closed Cell Backer Rod is a round, flexible, closed cell polyethylene foam with an exterior "skin" used as a backing and thickness control device for elastomeric and other cold-applied sealants. The backer rod becomes an integral part of the joint into which it is installed and therefore is available in a range of diameters to accommodate joints from 3/16 inch to 1-5/8 inch. It limits the depth of the sealant, therefore preventing excessive use of sealants. Because the sealant will not bond to the "skin" of the rod, it can stretch and recover with joint movement, with minimal stress being put on the points of adhesion to the substrate
- ASIN: B001OC1ITU
- Brand: C.R. Laurence
- Manufacturer: C.R. Laurence
CRL 1/8" x 3/8" Black Double Sided Glazing Tape
CRL 1/8" x 3/8" Black Double Sided Glazing Tape
C.R. LAURENCE 98418X38BL CRL Black 1/8" x 3/8" Double Sided Glazing Tape. CRL Foam Glazing Tape is a closed-cell polyethylene foam sealant in tape form. The aggressive acrylic adhesive is formulated to position the foam on curved or irregular surfaces with the slightest pressure. Adheres to wood, vinyl, aluminum, and glass. It can be used as an exterior glazing sealant - particularly where glass repositioning is important before the final setting.. Part Numbers Variations: 98418X38BL
- ASIN: B006JFMKW6
- Brand: C.R. Laurence
- Manufacturer: C.R. LAURENCE
CRL White Door Jamb Dust Pad Pack of 10 by CR Laurence
CRL White Door Jamb Dust Pad Pack of 10 by CR Laurence
These CRL Door Jamb Dust Pads are made of woven pile on a polypropylene fin with a pressure-sensitive adhesive backing. The Pad is applied to the door jamb above the rubber threshold, which helps seal the door corners against dirt and dust. 10 pads per package.
- ASIN: B006JCN5M8
- Brand: CR Laurence
- Manufacturer: CR Laurence
CRL Foam Door Weatherstrip 3/8 in Half Round
CRL Foam Door Weatherstrip 3/8 in Half Round
C.R. LAURENCE AV4737 CRL 3/8" Half Round Foam Door Weatherstrip. This CRL Half Round Foam Weatherstrip is manufactured to OEM specifications. These extruded closed cell sponge rubber moldings will not absorb water and are easy to replace using one of the following CRL Automotive Adhesives: 3M8001 Super Weatherstrip Adhesive (amber colored), 3M8008 3M Black Super Weatherstrip Adhesive, 3M8001 3M Weatherstrip Adhesive (black). Use CRL Quick Release Agent CRL958 or 3M Release Agent 3M8971 to soften the adhesive for quick removal of old weatherstrips.. Part Numbers Variations: AV4737
- UPC: 060829177246
- ASIN: B000MPRM4A
- Brand: C.R. Laurence
- Manufacturer: C.R. Laurence
CRL 3/8" Closed Cell Backer Rod - 100' Roll by CR Laurence
CRL 3/8" Closed Cell Backer Rod - 100' Roll by CR Laurence
CRL Closed Cell Backer Rod is a round, flexible, closed cell polyethylene foam with an exterior "skin" used as a backing and thickness control device for elastomeric and other cold-applied sealants. The Backer Rod becomes an integral part of the joint into which it is installed, and therefore is available in a range of diameters to accommodate joints from 3/16" to 1-5/8" (5 to 41 mm). It limits the depth of the sealant, thereby preventing excessive use of the sealant, which promotes proper joint design. Because the sealant will not bond to the "skin" of the rod, it can stretch and recover with joint movement, with minimal stress being put on the points of adhesion to the substrate. CRL Closed Cell Backer Rod will not absorb water or wick water to joint walls, which could cause adhesive failure. It is compatible with cold-applied sealants, and its round shape promotes the preferred "hourglass" shape for joint sealants. It withstands hot and cold temperature extremes from -45° to 160°F (-43° to 71°C). CRL Closed Cell Backer Rod is chemically inert, and resistant to oils, gasoline, and solvents. It will not stain or "bleed" into sealant material. Backer Rod is typically used in expansion/control joints where cold-applied sealants are used. These joints would normally be found in curtain walls, construction partitions, precast panels, parking decks, door and window frame perimeters, coping, floor and deck joints, horizontal traffic joints, and building rehabilitation projects. Proper size selection of CRL Closed Cell Backer Rod is important as it controls the depth of the sealant bead. It must be approximately 25% wider than the joint to fit tightly, and function as a bond breaker to prevent bottom side adhesion of the sealant. Always install using a blunt tool or roller. Cat. No. SBRR Backer Rod Roller is designed specifically for the smooth installation of all types of backer rods. NOTE: Do not tear, puncture, crease, over compress or stretch
- UPC: 696731568195
- ASIN: B006JFNYJO
- Brand: CR Laurence
- Manufacturer: CR Laurence
CRL Spray Adhesive - 11 oz. Can
CRL Spray Adhesive - 11 oz. Can
CRL Spray Adhesive is an easy-to-use industrial strength cement for installing insulation, attaching gaskets, joining foam rubber, applying labels, mounting sanding discs, tacking cloth, and dozens of other uses in the shop, factory or home. Makes permanent or temporary bonds that won't wrinkle, and are water resistant.
- ASIN: B001I7PXB0
- Brand: CRL
- Manufacturer: CRL
CRL Black Door Jamb Dust Pads - 10 Pack
CRL Black Door Jamb Dust Pads - 10 Pack
CRL Door Jamb Dust Pads are made of woven pile on a polypropylene fin with a pressure-sensitive adhesive backing. The pad is applied to the door jamb above the rubber threshold, this helps seal the door corners against dirt and dust.
- ASIN: B001G1353G
- Brand: C.R. Laurence
- Manufacturer: C.R. Laurence
CRL Foam Door Weatherstrip 1/2 in Half Round
CRL Foam Door Weatherstrip 1/2 in Half Round
C.R. LAURENCE AV4738 CRL 1/2" Half Round Foam Door Weatherstrip. This CRL Half Round Foam Weatherstrip is manufactured to OEM specifications. These extruded closed cell sponge rubber moldings will not absorb water and are easy to replace using one of the following CRL Automotive Adhesives: 3M8001 Super Weatherstrip Adhesive (amber colored), 3M8008 3M Black Super Weatherstrip Adhesive, 3M8001 3M Weatherstrip Adhesive (black). Use CRL Quick Release Agent CRL958 or 3M Release Agent 3M8971 to soften the adhesive for quick removal of old weatherstrips.. Part Numbers Variations: AV4738
- UPC: 060829177253
- ASIN: B000MPRM4K
- Brand: C.R. Laurence
- Manufacturer: C.R. Laurence
CRL 5/8" Closed Cell Backer Rod - 100' Roll by CR Laurence
CRL 5/8" Closed Cell Backer Rod - 100' Roll by CR Laurence
CRL Closed Cell Backer Rod is a round, flexible, closed cell polyethylene foam with an exterior "skin" used as a backing and thickness control device for elastomeric and other cold-applied sealants. The Backer Rod becomes an integral part of the joint into which it is installed, and therefore is available in a range of diameters to accommodate joints from 3/16" to 1-5/8" (5 to 41 mm). It limits the depth of the sealant, thereby preventing excessive use of the sealant, which promotes proper joint design. Because the sealant will not bond to the "skin" of the rod, it can stretch and recover with joint movement, with minimal stress being put on the points of adhesion to the substrate. CRL Closed Cell Backer Rod will not absorb water or wick water to joint walls, which could cause adhesive failure. It is compatible with cold-applied sealants, and its round shape promotes the preferred "hourglass" shape for joint sealants. It withstands hot and cold temperature extremes from -45° to 160°F (-43° to 71°C). CRL Closed Cell Backer Rod is chemically inert, and resistant to oils, gasoline, and solvents. It will not stain or "bleed" into sealant material. Backer Rod is typically used in expansion/control joints where cold-applied sealants are used. These joints would normally be found in curtain walls, construction partitions, precast panels, parking decks, door and window frame perimeters, coping, floor and deck joints, horizontal traffic joints, and building rehabilitation projects. Proper size selection of CRL Closed Cell Backer Rod is important as it controls the depth of the sealant bead. It must be approximately 25% wider than the joint to fit tightly, and function as a bond breaker to prevent bottom side adhesion of the sealant. Always install using a blunt tool or roller. Cat. No. SBRR Backer Rod Roller is designed specifically for the smooth installation of all types of backer rods. NOTE: Do not tear, puncture, crease, over compress or
- ASIN: B006JFJSWG
- Brand: CR Laurence
- Manufacturer: CR Laurence