Starrett 120A-6 Dial Caliper, Stainless Steel, White Face, 0-6" Range, +/-0.001" Accuracy, 0.001" Resolution

Starrett 120A-6 Dial Caliper, Stainless Steel, White Face, 0-6" Range, +/-0.001" Accuracy, 0.001" Resolution

The Starrett dial caliper has sharp black graduations every 0.100" on the no-glare, satin-finished stainless steel bar, and graduations on the dial every 0.001". One full revolution of the dial is equivalent to 0.100". These calipers have knife-edge contacts for measuring both inside dimensions (ID) and outside dimensions (OD). The knife-edge contacts can be used to scribe parallel lines on the workpiece. This caliper can be used with one hand through operating the fine adjustment roll with the thumb. The lock screw locks the dial bezel and holds the sliding jaw in position. The depth rod is integrated into the rack of the caliper, unlike many calipers which offer a detachable depth rod, or none at all. The hardened stainless steel components, including the bar, measuring surfaces, rack, gears, and depth rod, offer corrosion resistance, increased accuracy, and long life. Positive split gear anti-backlash control offers increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls, which prevents the gear teeth from jamming. It is undesirable to have much backlash due to the lack of precision offered by the increased amount of play between gears. Certain gear designs can minimize or eliminate backlash; split gear systems actually split the gear into two gears, each half as thick as the original gear. One of these gears is then fixed to the shaft while the other gear is allowed to turn. The free-turning gear is connected to coil springs that rotate it until all of the backlash in the control system has been eliminated. The rack teeth point down to keep foreign matter from clogging the gear operations. This prevents measurement errors where metal chips could interfere with proper caliper operation. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, m... [Read More]

  • UPC: 049659645149
  • ASIN: B00002254I
  • Brand: Starrett
  • Size: 0"-6" Range, +/-0.001" Accuracy, 0.001" Resolution
  • Manufacturer: Starrett

Dial Caliper, 6 in, 0.100/Rev, Blue Face

Dial Caliper, 6 in, 0.100/Rev, Blue Face

Dial Caliper, Dimension Type Inch, Range 0 In. to 6 In. , Graduations 0. 001 In. , Range per Revolution 0. 100 In. , Jaw Depth 1. 57 In. , Construction Material Hardened Stainless Steel, Dial Blue, Plain Finish, Features TiN Coated Main Beam Wear Surfaces, Lapped Jaws, Inverted Covered Rack and Dial Movement, Meets -, Includes Fitted Case, Long Form Calibration Certificate No

  • UPC: 603908594888
  • ASIN: B016E44V0K
  • Brand: Mitutoyo
  • Manufacturer: Mitutoyo

Starrett 1202-8 Dial Caliper, Stainless Steel, White Face, 0-8" Range, +/-0.001" Accuracy, 0.001" Resolution

Starrett 1202-8 Dial Caliper, Stainless Steel, White Face, 0-8" Range, +/-0.001" Accuracy, 0.001" Resolution

The Starrett 1202-8 dial caliper measures 0 to 8 inches with 0.001” accuracy. This handy measuring tool allows for reliable and accurate depth, inside, and outside readings with the sharp, black graduations every 0.100” on the no-glare, satin-finished bar, crisp lines on the white dial face, and knife edge contacts on the jaws. One full revolution of the dial is equivalent to 0.100”. The knife-edge contacts can be used to scribe parallel lines on the workpiece. This caliper can be used with one hand through operating the fine adjustment roll with the thumb. The lock screw locks the dial bezel and holds the sliding jaw in position. The depth rod is integrated into the rack of the caliper, unlike many calipers which offer a detachable depth rod, or none at all. The hardened stainless steel components, including the bar, measuring surfaces, rack, gears, and depth rod, offer corrosion resistance, increased accuracy, and long life. Positive double pinion anti-backlash control offers increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls – which prevents the gear teeth from jamming. It is undesirable to have much backlash due to the lack of precision offered by the increased amount of play between gears. Certain gear designs can minimize or eliminate backlash. Double pinion anti-backlash systems have two round gears (also called pinions) in contact with the rack gear that extends down the length of the caliper itself. The two pinions have a lower chance of disengaging with the rack gear than a single gear, thereby keeping the caliper more accurate than a single gear anti-backlash system. The rack teeth point down to keep foreign matter from clogging the gear operations. This prevents measurement errors where metal chips could interfere with proper caliper operation. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step me... [Read More]

  • UPC: 049659669794
  • ASIN: B001LF3CGW
  • Brand: Starrett
  • Manufacturer: Starrett

OKSLO Machine DRO 12 dial Caliper with White face.

OKSLO Machine DRO 12 dial Caliper with White face.

OKSLO Machine DRO 12 dial Caliper with White face.

  • ASIN: B07H2M6CNC
  • Brand: OKSLO
  • Manufacturer: OKSLO

12" PRECISION STAINLESS STEEL DIAL CALIPER white face #104-451-new

12" PRECISION STAINLESS STEEL DIAL CALIPER white face #104-451-new

* MADE OF STAINLESS STEEL. DISPLAY UP TO : 12" * 0.001" GRADUATION * 12" CALIPER JAW DEPTH: 2-1/2" * OD & ID MEASURING

  • ASIN: B07DGMJ6C5
  • Brand: CME Tools
  • Manufacturer: CME

Brown & Sharpe 599-579-12-1 Dial Caliper, Stainless Steel, White Face, 0-12 Range, +/-0.001 Accuracy, 0.001 Resolution, Meets DIN 862 Specifications by Brown & Sharpe

Brown & Sharpe 599-579-12-1 Dial Caliper, Stainless Steel, White Face, 0-12 Range, +/-0.001 Accuracy, 0.001 Resolution, Meets DIN 862 Specifications by Brown & Sharpe

Precise dial graduations of 0.001, with one revolution equivalent to 0.100;Hardened stainless steel construction for corrosion resistance and long life;1.25 diameter rotating dial has a lock screw to hold the sliding jaw in position, to help ensure consistent measuring;Covered rack keeps foreign matter from clogging the gear, to help prevent measurement error;Linear accuracy meets DIN 862 standards

  • ASIN: B01M1259F1
  • Brand: Brown & Sharpe
  • Manufacturer: Hexagon Metrology

Dial Caliper, 6 in, Black, 0.100/Rev

Dial Caliper, 6 in, Black, 0.100/Rev

Dial Caliper, Range 0-6 In, Graduations 0. 001 In, Revolution Range 0. 100 In, Jaw Depth 1. 57 In, Black Dial, Construction Material Hardened Stainless Steel, Satin Chrome Finish, Features Lapped Jaws, Inverted Covered Rack and Dial Movement, Includes Fitted Case

  • UPC: 603908596110
  • ASIN: B016E44R1I
  • Brand: Mitutoyo
  • Manufacturer: Mitutoyo

Fowler Full Warranty 52-562-001-0 Horizontal White Dial X-Test Indicator, 0.0005" Graduation Interval, 0.060" Maximum Measuring Range, 1.5" Diameter

Fowler Full Warranty 52-562-001-0 Horizontal White Dial X-Test Indicator, 0.0005" Graduation Interval, 0.060" Maximum Measuring Range, 1.5" Diameter

The Fowler 52-562-001-0 Horizontal White Dial X-Test Indicator features jeweled movement , revolution counter, automatic reversal and 1.5" diameter. 0.060" range, twice the range of most indicators. 2 dovetail mounting locations and includes 2 dovetail clamps (3/8" + 5/32"). Adjustable bezel for easy zeroing. 0.080" and 0.120" carbide points, 0.040" steel points. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages and digital scales. The company founded in 1946, is headquartered in Newton, MA.

  • UPC: 646795121447
  • ASIN: B0006J3LVK
  • Brand: Fowler
  • Size: 0.060" Max. Measurement, 1.5" Diameter
  • Manufacturer: Fred V. Fowler Company, Inc.

Brown & Sharpe 599-579-4 Dial Caliper, Stainless Steel, White Face, 0-6" Range, +/-0.001" Accuracy, 0.001" Resolution, Meets DIN 862 Specifications

Brown & Sharpe 599-579-4 Dial Caliper, Stainless Steel, White Face, 0-6" Range, +/-0.001" Accuracy, 0.001" Resolution, Meets DIN 862 Specifications

The Brown & Sharpe Dial-Cal dial caliper has a 1.25" diameter rotating dial with a lock, is made of stainless steel, and measures in inches. The covered rack helps prevent measurement error by protecting the gear from foreign matter. Linear accuracy meets Deutsches Institut für Normung (DIN) 862 standards. These calipers are for use in measuring inside dimensions (ID), outside dimensions (OD), depth and step. The caliper measures 0.100" per revolution of the dial. The lock screw locks the dial and holds the sliding jaw in position. Adjustable zero set allows the user to set zero at a convenient distance. The depth rod is integrated into the rack of the caliper, unlike many calipers that offer a detachable depth rod, or none at all. The hardened stainless steel components, including the bar, measuring surfaces, rack, gears, and depth rod, offer corrosion resistance, increased accuracy, and long life. Spring anti-backlash control offers increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls, which prevents the gear teeth from jamming. It is undesirable to have much backlash due to the lack of precision offered by the increased amount of play between gears. Certain gear designs can minimize or eliminate backlash; spring anti-backlash systems use a spring to add a compressive force, thereby minimizing backlash. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a f... [Read More]

  • UPC: 622419517742
  • ASIN: B0002FTZL8
  • Brand: TESA Brown & Sharpe
  • Size: 6 Inch
  • Manufacturer: Hexagon Metrology

12 inch Dial Caliper Imperial Vernier Workshop White Face Accurate Machine-DRO by Machine DRO

12 inch Dial Caliper Imperial Vernier Workshop White Face Accurate Machine-DRO by Machine DRO

Machine-DRO History - A division of Allendale Electronics, a family run British company founded in 2004. Our roots are firmly based in the UK, with a head office, engineering and inspection department at our works in Hoddesdon, Hertfordshire. We pride ourselves on being a measuring tool specialists offering tools, services, advice and expertise to our end customers and international distributor network.A hardened stainless steel dial caliper.Equipped with inside and outside jaws. Imperial easy to read white dial. 4-way measurement.Jaw depth 60mm.Resolution - 0.001Range - 0-12.

  • ASIN: B00OTUXZVS
  • Brand: Machine DRO