Micro Jig MB-050-0514 MATCHFIT Dovetail Router Bit For Dovetail Clamps, 14°, ½" Dovetail Profile, Yellow

Micro Jig MB-050-0514 MATCHFIT Dovetail Router Bit For Dovetail Clamps, 14°, ½" Dovetail Profile, Yellow

The match fit Dovetail router bit is specifically designed for the match fit Dovetail clamps and dovetail hardware. Its unique design uses the same standard 14-degree, ½” profile, but with rounded corners. It routes incredibly clean Dovetail grooves and requires less sanding, making the match fit system faster and easier than ever before. Down Shear - the 8-degree down Shear utilizes the bit's rotation to evacuate chips and dust, reducing friction, and heat, resulting in cleaner cuts. Bottom round over - the bottom of the dovetail Groove Bears the majority of the clamping pressure. The 1/32” round over strengthens that bottom corner by removing less material. This is especially important when routing grooves in plywood, as it minimized the the possibility of plies Separating. Top round over - the 1/16” round over at the top of the dovetail Groove has several functions. Firstly, it prevents tear out and fuzz, significantly reducing the amount of sanding needed. It also provides a range of tolerance. The bit can be set to a depth anywhere between .365” and .385”, and still be fully compatible with the match fit line of products. Within that range, The width of the Groove opening at the top will remain the same, but with varying round over exposure. The shallower the Groove, the smaller the round over. The deeper The Groove, the more pronounced the round over will be. Laser cut ⅜” depth guide - the depth guide line is exactly ⅜” from the end of the carbide cutter. With the depth guide line even with the surface of the material, The bit will cut a .375” deep groove, which is in the middle of its range of tolerance. Wide base - the wide base reduces vibration and noise while routing grooves, resulting in smoother, cleaner cuts. Router collet safety line - the router collet safety line shows how deep into the collet the bit should be. The shank of the bit was designed to be as long as possible, while still fitting into any Major manufacturers’ route... [Read More]

  • UPC: 815267010767
  • ASIN: B07CR9SVJS
  • Brand: MICRO JIG
  • Size: 14°, ½" Dovetail Profile
  • Manufacturer: MICROJIG

PORTER-CABLE 43776PC 17/32-Inch 7 Degree Carbide-Tipped Dovetail Router Bit

PORTER-CABLE 43776PC 17/32-Inch 7 Degree Carbide-Tipped Dovetail Router Bit

For use with the 4200 series of Porter Cable dovetail jigs. Enables through and half-blind dovetails to be cut. 1/2 In. shank. Manufactured by Porter Cable.

  • UPC: 039404135445
  • ASIN: B000RHEU0W
  • Brand: PORTER-CABLE
  • Size: 1-(Pack)
  • Manufacturer: PORTER-CABLE

K Kwokker 5 Pieces Dovetail Router Bit 1/2" Shank Diameters 1/4" 1/2" 3/8" 5/8" and 3/4" Professional Wood Milling Cutter for the Construction of Boxes Drawers Chests and Fine Casework in Woodworking

K Kwokker 5 Pieces Dovetail Router Bit 1/2" Shank Diameters 1/4" 1/2" 3/8" 5/8" and 3/4" Professional Wood Milling Cutter for the Construction of Boxes Drawers Chests and Fine Casework in Woodworking

K Kwokker 5 PIECES TONGUE AND GROOVE ROUTER BIT SET Specifications: Material:Carbide Tipped Cutters Color:Yellow Coating and Silver Metal Shank:1/2" Straight Shank Size: 1/2" x 3/8" Dovetail Router Bit 1/2" x 5/8" Dovetail Router Bit 1/2" x 3/4" Dovetail Router Bit 1/2" x 1/4" Dovetail Router Bit 1/2" x 1/2" Dovetail Router Bit Packing Including: 5 x Dovetail Router Bit

  • UPC: 705526213162
  • ASIN: B07KR4WNPB
  • Brand: K Kwokker
  • Manufacturer: K Kwokker

Freud 1/2" (Dia.) Dovetail Bit with 1/4" Shank (22-124)

Freud 1/2" (Dia.) Dovetail Bit with 1/4" Shank (22-124)

Compatible with popular dovetail jigs, these bits produce smooth, intricate dovetail joints. 1/2" Overall Dia (D), 1/2" Carbide Height (h), 1/4" Shank, 14° Angle (d), 2-5/8" Overall Length (H) Ideal For: Strong joint in wood drawers, boxes. Application: Strong, attractive joints for drawers and boxes. Made In Italy.

  • UPC: 008925384809
  • ASIN: B00004T7EK
  • Brand: Freud
  • Manufacturer: Freud

Whiteside Router Bits D14-55 Dovetail Bit with 1/2-Inch Large Diameter and 1/2-Inch Cutting Length

Whiteside Router Bits D14-55 Dovetail Bit with 1/2-Inch Large Diameter and 1/2-Inch Cutting Length

Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in Western North Carolina near the furniture manufacturing town of Hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Today, Whiteside Machine occupies a 40,000 sq. ft. manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside's quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. As always, Whiteside Machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts; along with rigid quality control, vital customer feedback and extensive field testing. Whiteside Machine Company.

  • UPC: 844278075106
  • ASIN: B000K2DQ7W
  • Brand: Whiteside Router Bits
  • Manufacturer: Whiteside

DBoyun 5 Bits Dovetail Router Bit SetStraight 1/2-Inch Shank

DBoyun 5 Bits Dovetail Router Bit SetStraight 1/2-Inch Shank

Specifications: Used for handmade a drawer or other woodworking. Industrial quality router bits. C3 micro-grain tungsten carbide cutter. Solid hardened bodies with anti-kickback design. Build-up & heat resistant teflon coating. Baked on heat resistant coating prevents build-up of sawdust, resin, and pitch. Totally enclosed & lubricated. High hook & shear angles allow cutters to slice smoothly into stock producing clean, splinter free. Notes: this item as image. Package Includes: 5 x Router Bit

  • UPC: 795891007671
  • ASIN: B07B3ZWQWM
  • Brand: DBoyun
  • Manufacturer: DBoyun

Yonico 14811q 11° X 1/2-Inch Dovetail Router Bit 1/4-Inch Shank

Yonico 14811q 11° X 1/2-Inch Dovetail Router Bit 1/4-Inch Shank

This dovetail bit has a cutting diameter of 1/2", and angle of 11° and a cutting height of 1/2". The bearing on the shank is 1/2" in diameter and the shank is 1/4" in diameter. The dovetail is probably the most recognizable of all woodworking joints. A dovetail joint is self-aligning and interlocking. There are numerous versions of the dovetail joint, including half blind dovetails, through dovetails, mitered dovetails and sliding dovetails. All of these variations are common in casework and drawer construction. A single dovetail bit can make almost any kind of dovetail, depending on the desired size. You'll need a jig to make most dovetail joints, as well as a guide bushing for your router. Check the instructions with your dovetail jig to select a bit with the appropriate angle, which will usually be somewhere between 7 and 14 degrees.

  • UPC: 765573832358
  • ASIN: B07KGJ2NXH
  • Brand: Yonico
  • Manufacturer: Yonico

Kempston 206061 Dovetail Bit, 1/4-Inch Shank, 3/4-Inch Cutting Diameter by 3/4-Inch Cutting Length by 14D

Kempston 206061 Dovetail Bit, 1/4-Inch Shank, 3/4-Inch Cutting Diameter by 3/4-Inch Cutting Length by 14D

  • UPC: 687461140614
  • ASIN: B001A0LWT2
  • Brand: Kempston Corporation
  • Size: 3/4"Dia.x3/4",14D,1/4"Shank
  • Manufacturer: Kempston Corporation

Whiteside Router Bits D7-530 Dovetail Bit with 17/32-Inch Large Diameter 3/4-Inch Cutting Length

Whiteside Router Bits D7-530 Dovetail Bit with 17/32-Inch Large Diameter 3/4-Inch Cutting Length

Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in Western North Carolina near the furniture manufacturing town of Hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Today, Whiteside Machine occupies a 40,000 sq. ft. manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside's quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. As always, Whiteside Machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts; along with rigid quality control, vital customer feedback and extensive field testing. Whiteside Machine Company.

  • UPC: 844278075465
  • ASIN: B0035YI370
  • Brand: Whiteside Router Bits
  • Manufacturer: Whiteside

CMT 818.130.11 Dovetail Bit, 1/2-Inch Diameter, 1/4-Inch Shank

CMT 818.130.11 Dovetail Bit, 1/2-Inch Diameter, 1/4-Inch Shank

Our selection of solid carbide or carbide tipped dovetail bits includes sizes to suit almost any of the dozens of jigs on the market.

  • UPC: 664252003310
  • ASIN: B000P4NRGU
  • Brand: CMT
  • Manufacturer: CMT