PSI Woodworking Products LR220-3 220V Long Ranger Dust Collector Switch
PSI Woodworking Products LR220-3 220V Long Ranger Dust Collector Switch
Remote control transmitter and receiver 220 volt handles up to a 2.5 maximum hip motor 20 amp relay receiver. turn on a dust collector from anywhere in the shop with the remote dust collector switch. grounded with a reset button this remote uses fry signal which is not affected by outside interference by large tv-Inchs transformers electrical noise or 3 phase power sources. • turn your dust collector on/off from anywhere in the shop • 220 volt 2.5 hip 15 amp relay/receiver • feck approved • 25 amp internal circuit breaker included in the receiver • 5 foot power cord.
- UPC: 416960000293
- ASIN: B00004S9AG
- Brand: PSI Woodworking
- Size: Not applicable
- Manufacturer: PSI Woodworking
WEN 3401 5.7-Amp 660 CFM Dust Collector with 12-Gallon Bag and Optional Wall Mount
WEN 3401 5.7-Amp 660 CFM Dust Collector with 12-Gallon Bag and Optional Wall Mount
Remember when you had the sawdust in your woodshop under control? Keep your work area clean and organized with the WEN 12-Gallon Dust Collector. With a 5.7-amp motor moving over 660 cubic feet of air per minute, we can say with confidence that this thing really sucks. The 6-inch impeller combined with the 4-inch dust port inlet lets you connect to your favorite woodworking tools. The four 1-3/4 inch swivel casters lock in place to prevent unwanted movement while the compact design makes for easy storage and transport between jobs. Take off the wheels and mount it to your shop’s wall with the optional built-in wall mount for accessible dust collection whenever you need it. Compatible with the WEN 10-Foot Dust Hose (model 28200) and the WEN 20-Foot Dust Hose (model 28221). And because its a WEN product, your dust collection system comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.
- UPC: 044459034018
- ASIN: B07D9YHZ87
- Brand: WEN
- Manufacturer: WEN
WEN 3403 1,500 CFM 16-Amp 5-Micron Woodworking Dust Collector with 50-Gallon Collection Bag and Mobile Base
WEN 3403 1,500 CFM 16-Amp 5-Micron Woodworking Dust Collector with 50-Gallon Collection Bag and Mobile Base
Remember when you had a clean work shop? Control the mess and minimize cleanup with the WEN 1,500 CFM 5-Micron Dust Collector. This powerful motor provides up to 16 amps of dust collection power, creating 1,500 cubic feet per minute worth of high velocity circulation. Attach up to two hoses at a time to either of the 4-inch inlets, allowing for connection to multiple woodworking tools all at one time. Combine that with the four swivel casters and mobile base for a versatile and powerful dust extractor that can be easily stored and moved around. The included vertical collection bag holds up to 50 gallons of dust at a time, so you can spend your time woodworking instead of constantly emptying out wood chips. The quick-release clasp makes for simple bag installation while the high speed steel impeller rotates over 3450 times per minute for maximum suction. Compatible with the WEN 28200 10-Foot 4-Inch Dust Hose and the WEN 28221 20-Foot 4-Inch Dust Hose. And, because its a WEN product, your dust collection system comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN. NOTE: requires a NEMA 5-20R 20-amp outlet with a 25A circuit breaker (see images for reference).
- UPC: 044459034032
- ASIN: B078BSVGMZ
- Brand: WEN
- Manufacturer: WEN
Delta Power Equipment 50-723T2 1 hp Dust Collector, Black
Delta Power Equipment 50-723T2 1 hp Dust Collector, Black
The 50-723 T2 includes motor and blower, support frame, 2 micron Filtration bag with Sewn-In bag ring, 6 mil plastic chip Collection bag, (1) snap-in filter bag ring, (2) 4” intake ports, (2) swivel caster assemblies, two large 8” wheels, cord and Plug.
- UPC: 847962006028
- ASIN: B07211DWNG
- Brand: Delta
- Manufacturer: Delta
Dust Collection Power Tool Hose with Fittings For Use With Smaller Power Tools Shop Vacuums Dust Collectors and General Home Use
Dust Collection Power Tool Hose with Fittings For Use With Smaller Power Tools Shop Vacuums Dust Collectors and General Home Use
When using hand held power tools the tend to generate a lot of dust. Standard size Shop Vac hoses are too large and bulky and typically do not flex or maneuver all that easily. This small 1-3/16" O.D. flexible dust collection power tool hose moves freely with your power tools making super convenient and hardly noticeable while its connected. Not only is this hose easier to manage, but using this hose with your tools will keep your shop cleaner and it can be quickly coiled up for easy storage. The kit comes with two different screw on flexible rubber fittings on each end of the hose which are ideal for connecting random orbital sanders, palm sanders, biscuit joiners or any other power tools with small dust collection ports. It can also be used on a number of smaller stationary tools like the K4 or K5 Kreg Jig for example. The small power tool hose will adapt to a 2 -1/4" I.D. Shop Vac opening using the taper vacuum adapter that comes in the box. PLEASE NOTE: Before you place your order check the size of your vacuum and power tool ports to make sure the hose and fittings will fit properly. The I.D. and O.D. on the rubber end fittings and hose are approximate sizes and may vary slightly.
- UPC: 810948017318
- ASIN: B000XXXT9S
- Brand: Peachtree Woodworking Supply
- Manufacturer: Peachtree Woodworking Supply Inc.
Dastool Drilling Dust Collection Attachment,Universal Dust Shroud for Drilling 1-3/8" Dt1801
Dastool Drilling Dust Collection Attachment,Universal Dust Shroud for Drilling 1-3/8" Dt1801
EASY TO USE: Specially designed to offer you the ultimate in convenience and comfort, this dust collector is very easy to use in just seconds. Just set the drill buddy on any flat surface of your choice, press on the vacuum button for an instant and secure seal, then drill. After through, simply release the suction by clicking on the button and empty the dust over a bin so you can move onto your next project. CATCH ALL DUST AND DEBRIS ON ANY SURFACE: Whether you're drilling concrete boards or drywall, this dust collector will easily catch all debris extracted from the wall and allow you to empty the contents in the trash can with a single move. Optimized for 1-3/8 inch drill bit diameters with dual air chambers and a secure, rubber seal for instant suction to any flat surface, you will lovely use this tool.
- UPC: 653391559819
- ASIN: B07G4S4JB3
- Brand: dastool
- Size: 1-3/8 inch
- Manufacturer: dastool Ltd
SHOP FOX W1685 1.5-Horsepower 1,280 CFM Dust Collector
SHOP FOX W1685 1.5-Horsepower 1,280 CFM Dust Collector
A powerful dust collector from Shop Fox. This unit features an extra heavy-duty 12" steel impeller and a 1-1/2 HP motor that runs on 110V. For wood dust only. Features 2.5 micron filtration.
- UPC: 754001016859
- ASIN: B001R23SS6
- Brand: Shop Fox
- Size: 1
- Manufacturer: Shop Fox
HERZO Universal Surface Grinding Dust Shroud for Angle Grinder 5-inch
HERZO Universal Surface Grinding Dust Shroud for Angle Grinder 5-inch
Allows Collection of harmful dust during suface grinding Application attachs directly to 4"/5" all majors brand grinders Locking attachment to vac hose. Box Contains 1x Dust Shroudand ，4 pcs clamping washer thickness 1.5-5.5mm，1x shroud wrench Cannot fitting model: Bosch GWS13-125CI;GWS13-125CIE;GWS13-125CIX;GWS13-125CIEX;GWS 17-125 INOX;GWS 17-125CI;GWS 17-125CIE;GWS 17-125CIT;GWS17-125 CIT ;GWS 17-125CIX ;GWS 17-125 CIEX;GWS 17-150CISuitable Grinding Wheel Cup Size-Arbor hole in the center : 7/8-Inch-Outside diameter : 5-Inch-Height:7/8-Inch
- UPC: 707454032747
- ASIN: B01N7ONJUA
- Brand: HERZO
- Size: 5-Inch
- Manufacturer: HERZO
Festool 575280 CT SYS HEPA Dust Extractor
Festool 575280 CT SYS HEPA Dust Extractor
Portable and compact, yet loaded with features such as full unit HEPA certification, tool-triggered operation, high-performance suction, and Systainer integration. The CT SYS is ideal for remodelers and painters who need the utmost in portability, yet without compromise in function. Self-contained hose and cord storage, onboard tools, manual and automatic function, shoulder strap, Anti-Static design, system integration, and low sound (67 dBA)), the CT SYS is Well-Equipped and built for professional use. The CT SYS system is small in size, big in performance. Carries full unit HEPA certification.
- ASIN: B07CP6PLS8
- Brand: Festool
- Manufacturer: Festool
iVAC Basic 3-Tool Shop Vacuum Dust Collector Switch/Pro Tool Plus Kit
iVAC Basic 3-Tool Shop Vacuum Dust Collector Switch/Pro Tool Plus Kit
Conquer the dust problem in your workshop with iVAC's automated dust control system! Connect any tool with a dust collection port, from your hand-held sander to your stationary cabinet saw, to iVAC's system and breathe easier! At the heart of iVAC's system is the Pro Switch, which automatically activates your shop vacuum or dust collector when you turn on a power tool that is connected to the system. Each power tool connects to the dust collection system via a Pro Tool Plus automatic sensor (one per tool). The Pro Tool Plus senses tool power via the magnetic field surrounding the tool's power cord and then communicates with the Pro Switch via a wireless signal to turn on the vacuum or dust collector. Each Pro Switch can receive signals from up to 8 power tools. System set-up is simple! Just plug the Pro Switch in to an outlet and plug the shop vacuum or dust collector in to the switch. The Pro Tool Plus unit attaches to the power tool cord (works with power cable, metal clad cable and steel conduit) with a screw-down clamp. Position the Pro Tool Plus in such a way to receive the strongeset signal from the power tool and tighten the screws on the clamp. Once you connect your power tool to your shop vacuum or dust collector, you are ready to go! The iVAC Basic 3-Tool Kit is intended for smaller home workshops that run on standard 15-20amp 115-volt service and for vacuums of up to 1.5 HP, and includes the following:One (1) iVAC Pro Switch S11520-A-NA (runs on 20-amp, 115-volt service and comes with an adaptor for 15-amp service; each Pro Switch can receive signals from up to 8 different tools)Three (3) iVAC Pro Tool Plus TP-NA units
- UPC: 729798862590
- ASIN: B07CKM3BSD
- Brand: iVAC
- Manufacturer: iVAC