EVANS Analog Refractometer E2196 Designed to Accurately Test for Residual Water Content
EVANS Analog Refractometer E2196 Designed to Accurately Test for Residual Water Content
This Evans Cooling Refractometer is designed to accurately test for residual water content. By determining the water content you'll be able to safely set up your cooling system with Evans Cooling products. Pre-calibrated for accuracy! Fast, simple optical method. Requires only 1 drop of coolant. Evans analog refractometers are used to measure the final water content after a conversion to Evans waterless coolant using a Brix scale.
- UPC: 853613002271
- ASIN: B0787J2GZS
- Brand: EVANS
- Manufacturer: Evans
Evans Coolant EC61001 EC41001 Heavy Duty Waterless Coolant and Prep Fluid, 2 Gallon Combo Pack with Funnel
Evans Coolant EC61001 EC41001 Heavy Duty Waterless Coolant and Prep Fluid, 2 Gallon Combo Pack with Funnel
Evans Heavy Duty Waterless Coolant is specifically designed for Diesel Heavy Duty Trucks, Generators, Agricultural Vehicles, and Heavy Equipment. Evans Waterless Coolants have a boiling point above 375 Degree Fahrenheit and will not vaporize, eliminating overheating, boil-over and after-boil, while generating very low vapor pressures reducing strain on engine cooling system components. Contains no oxygen, effectively eliminating corrosion, liner and cooling pump erosion, resulting in reduced maintenance costs. Eliminates pre-ignition and detonation caused by overheating, reducing downtime, improving combustion efficiency, and delivering more power. Provides low temperature freeze protection with a freezing point below -40F. Evans Prep Fluid should be used to ensure all residual water is removed from the system before adding Evans Waterless Coolant. Evans Prep Fluid is a waterless cooling system flush designed to seek out remaining water after draining the cooling system of an engine. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. A minimum of 2 gallons of Prep Fluid is recommended for heavy duty diesel engines and 1 gallon of Prep Fluid is recommended for all motorcycles converting to High Performance Coolant or Powersports. Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush only.
- UPC: 672713966517
- ASIN: B014HC8NVE
- Brand: EVANS
- Size: 2 gallon
- Manufacturer: Evans Coolant
EVANS Coolant EC53001 High Performance Waterless Coolant, 4 Gallon Pack
EVANS Coolant EC53001 High Performance Waterless Coolant, 4 Gallon Pack
Evans High Performance Waterless Engine Coolant, EC53001, is specifically designed for all modern, classic, and vintage gasoline engines, light duty diesels, LP and CNG vehicles. Evans High Performance Coolant (HPC) defends against boil-over and corrosion while allowing the engine to continue producing its peak horsepower. When converting an engine from a water-based coolant to HPC, great care should be given during the installation (conversion) process to ensure that all of the old water-based coolant and water is removed before installing HPC. It is recommended that the system be flushed with Evans Prep Fluid prior to installing HPC When the installation is complete, the water content of the coolant should be no more than 3 percent for optimum performance. Evans HPC coolant contains a bitterant. Evans coolant is proudly Made in the USA.
- UPC: 672713966975
- ASIN: B014HC8HRY
- Brand: EVANS
- Size: Pack of 4
- Manufacturer: Evans Coolant
EVANS Waterless Coolant Small Block Chevy Engine Full Conversion Bundle
EVANS Waterless Coolant Small Block Chevy Engine Full Conversion Bundle
EVANS complete kit is specifically made for a full conversion of Small Block Chevy application with an OE radiator and cooling system. This bundle includes: 3 Evans Prep Fluid EC42001 (one gallon each), 4 Evans High Performance Coolant (HPC) EC53001 (one gallon each), one Evans hat, one radiator cap sticker, one domed decal sticker, one shop rag (color may vary), and one funnel (color may vary). Evans Prep Fluid is a waterless cooling system flush engineered specifically to purge the cooling system of water and water-based antifreeze after draining and before installing new Evans Waterless Coolant. Prep Fluid should be used when block drains are inaccessible or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. Prep Fluid is not intended to be a stand-alone operating coolant, but as a flush only. Evans High Performance Waterless Engine Coolant (HPC) is specifically designed for all modern, classic, and vintage gasoline engines, light duty diesels, LP and CNG vehicles. HPC defends against boil-over and corrosion while allowing the engine to continue producing its peak horsepower. Evans HPC is not a coolant additive, and when the installation is complete, the water content of the coolant should be no more than 3 percent for optimum performance. Evans HPC coolant contains a bittering agent/bitterant. Evans coolant is proudly made in the USA.
- ASIN: B076FD333H
- Brand: EVANS
- Manufacturer: EVANS
EVANS Coolant EC72064 Powersports Waterless Engine Coolant, 1/2 gallon
EVANS Coolant EC72064 Powersports Waterless Engine Coolant, 1/2 gallon
Evans Waterless Powersports Coolant, EC72064, is formulated specifically for Powersports machines and the extreme conditions they encounter. Power sports Coolant defends against heat-related damage, while allowing the engine to continue producing its peak horsepower. When converting an engine from a water-based coolant to Evans coolant, great care should be given during the installation (conversion) process to ensure that all of the old water-based coolant is removed. It is recommended that the system be flushed with Evans Prep Fluid prior to installing Evans PWC. When the installation is complete, the water content of the coolant should be no more than 3 percent. If the water is above that limit, the coolant will perform no better than water-based antifreeze. Evans Powersports Coolant contains a bittering agent/bitterant.
- UPC: 672713980223
- ASIN: B00R69MDCG
- Brand: EVANS
- Size: Pack of 1
- Manufacturer: Evans Cooling Systems
Evans Coolant EC53001-EC42001 High Performance Waterless Coolant and Prep Fluid Combo Pack, 2 Gallon with Funnel
Evans Coolant EC53001-EC42001 High Performance Waterless Coolant and Prep Fluid Combo Pack, 2 Gallon with Funnel
Evans High Performance Waterless Coolant is specifically designed for all modern, classic, vintage gasoline engines, light duty diesels, LP and CNG vehicles. Evans Waterless Coolants have a boiling point above 375 Degree Fahrenheit and will not vaporize, eliminating overheating, boil-over and after-boil, while generating very low vapor pressures reducing strain on engine cooling system components. Contains no oxygen, effectively eliminating corrosion, liner and cooling pump erosion, resulting in reduced maintenance costs. Eliminates pre-ignition and detonation caused by overheating, reducing downtime, improving combustion efficiency, and delivering more power. Provides low temperature freeze protection with a freezing point below -40F. Evans Prep Fluid should be used to ensure all residual water is removed from the system before adding Evans Waterless Coolant. Evans Prep Fluid is a waterless cooling system flush designed to seek out remaining water after draining the cooling system of an engine. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. A minimum of 2 gallons of Prep Fluid is recommended for heavy duty diesel engines and 1 gallon of Prep Fluid is recommended for all motorcycles converting to High Performance Coolant or Powersports. Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush only.
- UPC: 672713980629
- ASIN: B014HC8HO2
- Brand: EVANS
- Size: 2 gallon
- Manufacturer: Evans Coolant
Evans Coolant EC72064-2 EC41001 Powersports Waterless Coolant and Prep Fluid Combo Pack, 2 Gallon with Funnel
Evans Coolant EC72064-2 EC41001 Powersports Waterless Coolant and Prep Fluid Combo Pack, 2 Gallon with Funnel
Evans Powersports Waterless Coolant is specifically designed for MX Bikes, Trail Bikes, Enduro Bikes, Street Bikes, Quad Bikes, ATVs, UTVs and Snowmobiles. Evans Waterless Coolants have a boiling point above 375 Degree Fahrenheit and will not vaporize, eliminating overheating, boil-over and after-boil, while generating very low vapor pressures reducing strain on engine cooling system components. Contains no oxygen, effectively eliminating corrosion, liner and cooling pump erosion. Eliminates pre-ignition and detonation caused by overheating, improving combustion efficiency and delivering more power. Provides low temperature freeze protection with a freezing point below -40F. Evans Waterless Coolants are Less Toxic. Standard anti-freeze is toxic and known to kill pets. Evans Prep Fluid is a waterless cooling system flush designed to seek out remaining water after draining the cooling system of an engine. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. A minimum of 2 gallons of Prep Fluid is recommended for heavy duty diesel engines and 1 gallon of Prep Fluid is recommended for all motorcycles converting to High Performance Coolant or Powersports. Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush only. Evans Coolant contains a bittering agent/bitterant.
- ASIN: B014HC8NVY
- Brand: EVANS
- Size: 2 gallon
- Manufacturer: Evans Coolant
EVANS Coolant EC72064-EC42064 Powersports Waterless Coolant 1/2 Gallon and Prep Fluid Combo Pack 1/2 Gallon with Funnel
EVANS Coolant EC72064-EC42064 Powersports Waterless Coolant 1/2 Gallon and Prep Fluid Combo Pack 1/2 Gallon with Funnel
Evans Waterless Powersports Coolant, EC72064, is formulated specifically for Powersports machines and the extreme conditions they encounter. Evans Power Sports coolant defends against boil-over and corrosion, while allowing the engine to continue producing its peak horsepower. When converting an engine from a water-based coolant to Evans coolant, great care should be given during the installation (conversion) process to ensure that all of the old water-based coolant and water is removed. It is recommended that the system be flushed with Evans Prep Fluid prior to installing Evans Powersports coolant. When the installation is complete, the water content of the coolant should be no more than 3 percent for optimum performance. Evans Power-sports coolant contains a bitterant. Evans Coolant contains a bittering agent/bitterant.
- UPC: 854335006226
- ASIN: B01MVAQ4NK
- Brand: EVANS
- Manufacturer: EVANS
Evans Coolant EC61001 Heavy Duty Waterless Coolant, 4 Gallon Pack with Funnel
Evans Coolant EC61001 Heavy Duty Waterless Coolant, 4 Gallon Pack with Funnel
Evans Heavy Duty Waterless Engine Coolant, EC61001, is the right choice for all heavy duty diesel, CNG and LNG engines, in both stationary and on-road applications. It is especially effective in severe-duty applications where water-based coolants are challenged. Evans Heavy Duty Coolant defends against heat-related damage while allowing the engine to continue producing its peak horsepower. Without vapor formation, pump and wet-sleeve liner cavitation are eliminated, and EGR cooler tubes are protected from heat-induced fatigue which results in tube cracking. Fuel economy improvement and emissions reduction are possible from being able to raise the operating temperature without fear of overheating. When converting an engine from a water-based coolant to waterless coolant, great care should be given during the installation (conversion) process to ensure that all of the old water-based coolant is removed before installing Evans coolant. It is recommended that the system be flushed with Evans Prep Fluid, EC42001, prior to installing any waterless coolant. When the installation is complete, the water content of the coolant should be no more than 3 percent. If the water is above that limit, the coolant will perform no better than water-based antifreeze.
- UPC: 672713966456
- ASIN: B014HC8I00
- Brand: EVANS
- Size: Pack of 4
- Manufacturer: Evans Coolant
Star Brite Star-Cool Premium Synthetic PG Engine Coolant - 1 Gallon
Star Brite Star-Cool Premium Synthetic PG Engine Coolant - 1 Gallon
Star brite worked with the world’s leading formulators of coolant additives to develop a product that significantly outperforms traditional coolants and helps engines develop maximum horsepower. Star Cool combines an essentially non-toxic propylene glycol base with unique poly organic additives (POAT) to create the most technologically advanced engine coolant. Star Cool is the best choice for all high-performance engines. With a service life of up to 2+ years, 250,000 miles or 4,000 hours in gasoline engines (750,000 miles, 7+ years or 12,500 hours in diesel engines) it goes significantly beyond all OEM specifications. Star Cool passivates metal surfaces to create a barrier to corrosion and will seal pinhole leaks or small cracks. Pre-mixed with de-ionized water, it is ready to use and safe for all water-cooled gas or diesel-powered engines. Star Cool is ideal for year-round use; protecting against boilover to 265°F and freezing to -26°F (with 15 psi cap).
- UPC: 071247332001
- ASIN: B00BNPI06C
- Brand: Star Brite
- Size: 1 Gallon
- Manufacturer: Star brite