ORANDESIGNE 2 Pack Gas Can Spout Replacement Nozzle Old Style with Screw Cap Collar Stopper Cap Gaskets Rear Vent Cap for Plastic Cotainer Blitz Gott Rubbermaid Essence RotopaX (2)
ORANDESIGNE 2 Pack Gas Can Spout Replacement Nozzle Old Style with Screw Cap Collar Stopper Cap Gaskets Rear Vent Cap for Plastic Cotainer Blitz Gott Rubbermaid Essence RotopaX (2)
-----**IMPORTANT** :This Gas Can Spout Kit with Fine Thread screw collar cap fits only on Rubbermaid, Kolpin, Gott, Blitz Fuel Gas Can. But, IF using your cans existing screw cap collar ,and only using the Spout & Stopper it's quite universal & will work with most Plastic Gas Cans & Jugs like Midwest, Eagle, Gott,Scepter, Unistream, Ameri-Can, Stancan, Igloo, RotoPax, Kolpin & many other fuel containers -----This will not work on new style safety cans that have more coarse threads. -----PLEASE DOUBLE CHECK MEASUREMENTS & COMPARE TO YOUR EXISTING PARTS. Not all Gas Can Parts are Interchangeable between Brands. IF you do not sure,please feel free to contact us(Note: These spouts do not work with Chilton / Sears Craftsman cans). -----Stopper Cap doubles as a Spout Cap & as a Stopper when hiding the spout inside the can for storage or transport. -----Screw Cap Collar retaining rings holds the spout to the can: The Screw collar just fits on Rubbermaid, Kolpin, Gott Can Fuel Gas with FINE THREAD -----Rear Air Vent Cap including Gasket & Strap keep it tethered to the can, never lose another cap. Specifications: Material: ABS Color: Black + White Size: approx 8-1/2" Long with a tapered tip opening approx 5/8" & the base ridge width w/ Gasket is approx 1-1/2" Wide Quantity: 2 sets Package Weight: Approx.70g Gas Can Style:Old Style Plastic Kerosene Diesel Gasoline Container Jug Suitable: for plastic can Any Volume like 1 gal 2.5 gal 5 gallon ect.. Package List: 2 * White Spouts 2 * Rubber Gaskets 2 * Spout Caps 2 *Screw cap collar 2 * Rear Vent Cap
- ASIN: B07MN29XKW
- Brand: ORANDESIGNE
- Manufacturer: ORANDESIGNE
1 Gas Can Spout Replacement with Gasket, Cap and Stopper. Fits Rubbermaid Essence Gott & Some RotopaX Kolpin Blitz.
1 Gas Can Spout Replacement with Gasket, Cap and Stopper. Fits Rubbermaid Essence Gott & Some RotopaX Kolpin Blitz.
Fits on old style gas cans. Everything is as shown in the picture plus there is extra yellow cap to fit more cans out there. ****Important : The kit does not include vent cap****
- UPC: 860029002597
- ASIN: B07FJSMZ3R
- Manufacturer: Spout King
2 New Rear Vent Screw Caps for Replacement Gas Can fits Most Gott Rubbermaid Essence Briggs & Stratton and Some Kolpin Rotopax Fuel Diesel Kerosene Jugs
2 New Rear Vent Screw Caps for Replacement Gas Can fits Most Gott Rubbermaid Essence Briggs & Stratton and Some Kolpin Rotopax Fuel Diesel Kerosene Jugs
Brand New, Never Used 2 units Rear Vent Screw Caps. PLEASE DOUBLE CHECK YOUR CAN MEASUREMENTS. This opening is approximately 11/16". AFTERMARKET REPLACEMENT PART FOR plastic gas, diesel, kerosene, water cans vintage style cans with rear vent ports. Not all gas can parts are interchangeable between brands, these caps do not fit any very brand. Therefore, Please double check your requirements and ask any questions prior to purchase to ensure getting the right parts the 1st time. No spout or gas can is included.
- UPC: 850006478026
- ASIN: B07QGYBLBD
- Brand: Kool Products
- Manufacturer: Spout King
ORANDESIGNE 3 Set Gas Can Spout Replacement Kit Includes Nozzle Spout Stopper Cap Gaskets Rear Vent Cap Update Old Style Plastic Fuel Diesel Cotainer for Blitz Rubbermaid Essence Gott RotopaX (3)
ORANDESIGNE 3 Set Gas Can Spout Replacement Kit Includes Nozzle Spout Stopper Cap Gaskets Rear Vent Cap Update Old Style Plastic Fuel Diesel Cotainer for Blitz Rubbermaid Essence Gott RotopaX (3)
Gott / Rubbermaid Gas Spout including U-seal Rubber Gasket. Replica replacement #706. Fits on Blitz / Gott / Rubbermaid Essence Plastic Can Models #'s 1261 1251 1226 1228 1221 & ON MODELS 1225 1250 ONLY THE SPOUT FITS. If only using the Spout & Stopper alone, these May fit of some other Brand Plastic Gas Cans using your own existing screw cap collar for Blitz, Midwest, Scepter, Eagle, Igloo, Stancan, Rotopax and Kolpin. (These do not work with Chilton / Sears Craftsman cans). (Note: These spouts do not work with Chilton / Sears Craftsman and new safty can). Stopper Cap doubles as a Spout Cap & as a Stopper when hiding the spout inside the can for storage or transport. Screw Cap Collar retaining rings holds the spout to the can: The Screw collar just fits on Rubbermaid, Kolpin, Gott Can Fuel Gas with FINE THREAD Rear Air Vent Cap including Gasket & Strap keep it tethered to the can, never lose another cap. IMPORTANT: PLEASE DOUBLE CHECK MEASUREMENTS & COMPARE TO YOUR EXISTING PARTS. Not all Gas Can Parts are Interchangeable between Brands. These Parts do not fit any other Brand cans other than what is stated above. Specifications: Material: ABS Color: Black + White Size: approx 8-1/2" Long with a tapered tip opening approx 5/8" & the base ridge width w/ Gasket is approx 1-1/2" Wide Quantity: 3 sets Package Weight: Approx.150g Gas Can Style:Old Style Plastic Kerosene Diesel Gasoline Container Jug Suitable: for plastic can Any Volume like 1 gal 2.5 gal 5 gallon ect.. Package List: 3 * White Spouts 3 * Rubber Gaskets 3 * Spout Caps 3 *Screw cap collar 3 * Rear Vent Cap
- ASIN: B07LG5RPRG
- Brand: ORANDESIGNE
- Manufacturer: ORANDESIGNE
ORANDESIGNE Blitz Gas Can Spout Replacement Flexible Pour Nozzle Kit with Gasket, Stopper Cap, Screw Cap Collar and Vent Cap Compatible with Rubbermaid Essence Gott 3 Pack
ORANDESIGNE Blitz Gas Can Spout Replacement Flexible Pour Nozzle Kit with Gasket, Stopper Cap, Screw Cap Collar and Vent Cap Compatible with Rubbermaid Essence Gott 3 Pack
-Replacement Gas Can Spouts Nozzle including Gasket & Stopper Caps. Spout Part Replacement #706. Fits on Gott / Rubbermaid / Rubbermaid Essence Plastic Can. Fuel / Gas / Diesel / Kerosene / Water -Old School Style Stopper Caps - doubles as a spout cap and a stopper to hide spout in can. -Gott / Rubbermaid Essence Screw Cap Collars, retaining rings holds the spout to the can. Note: The Screw collar just fits on Rubbermaid, Kolpin, Gott Can Fuel Gas with FINE THREAD,Fits Blitz Brand Plastic cans, but you may need to cut off the eyelet holes on side of cap. -Yellow Vent Caps with RETAINING LIP to prevent from popping out of your can. Easy to install,drill required.Start with an empty can, Drill 1/2" hole at the back of your plastic can above the fill line, insert vent cap and pop it in gently with a rubber mallet.We suggest you drill a smaller hole to start with and work your way up to the 1/2" drill bit. Be sure to drill a straight clean hole don't swagger side to side with the bit so you won't make a bigger hole than you need. The Vent cap needs to sit in tight to give a good seal. Be sure to clean out your can prior to usage. -IMPORTANT: PLEASE DOUBLE CHECK MEASUREMENTS AND COMPARE TO YOUR EXISTING PARTS. Specifications: Material: ABS Color: Black + White Size: Shown as PictureWeight: Approx.150g Fitment: For Blitz, Rubbermaid, Gott, Kolpin, RotopaX brand , Plastic Kerosene Diesel Can Container JugSuitable Capacity: Any Volume Plastic Can 1 gal 2.5 gal 5 gallon ect.. Package List: 3 * White Pour Spouts 3 * Rubber Gaskets 3 * Spout Caps 3 * Screw cap collar 3 * Rear Vent CapCan not include
- ASIN: B07NZ5S691
- Brand: ORANDESIGNE
- Manufacturer: ORANDESIGNE
Kool Products (Retail Pack 3) Gas Can Spout Replacement With Gasket, Stopper, Cap With Stripe, 2 Collar Caps (Yellow and Black) That Fits On Most Of The Cans Out There
Kool Products (Retail Pack 3) Gas Can Spout Replacement With Gasket, Stopper, Cap With Stripe, 2 Collar Caps (Yellow and Black) That Fits On Most Of The Cans Out There
Brand New, Never Used and includes the following. 3 Universal Gas Spout including 3 Rubber Gasket. These are very high quality fuel / Gas / Diesel / Kerosene / Water "SPOUTS ". 3 Screw Collar Caps in yellow and Black. These screw cap retaining rings holds the spout to the can. 3 Stripe Caps as shown the picture. Excellent Product. Buy with Confidence. Fits on Most of the Cans out there with Fine or Coarse Thread. ****Important - No vent plugs included in this kit*******
- UPC: 860000137751
- ASIN: B07H7VZTR1
- Brand: Kool Products
- Size: 3 PACK
- Manufacturer: Spout King
Gas Can Spout Gaskets Rubber Gas Can Seals Replacement Part Gott Rubbermaid Blitz Wedco Scepter Eagle
Gas Can Spout Gaskets Rubber Gas Can Seals Replacement Part Gott Rubbermaid Blitz Wedco Scepter Eagle
Description: The Gasket is made to stretch slightly and might fit some of the spouts from these brand cans: Wedco, Briggs & Stratton, Gott, Rubbermaid Essence, Scepter, Ameri-Can, Midwest, Igloo, StanCan, EZ-pour, Kolpin and RotopaX Measures approx. 1-1/2" OD - made to stretch slightly when applied to Gas Spout, approx. 1-1/4" opening and approx. 3/16" thick with a groove /u seal in the middle to stay on the bottom of the gas spout ridge - please double check your required measurements. New Replacement High Quality Viton Rubber that exceeds the quality of the old Rubber used. These New Replacement Gaskets work with the spouts shown in the pictures. Note: Please double check all pictures and measurements. Not all gas can parts are interchangeable between brands. Please ask any questions prior to purchase to be certain you're getting the right parts the 1st time. Gas Spouts & Caliper Not Included Package included: 3 x New Rubber Viton U-Seal Gaskets
- UPC: 634769420672
- ASIN: B07JPCR1ML
- Brand: Dyna-Living
- Manufacturer: Dyna-Living
SCITOO Compatible with Gas Can Spout Replacement with Gasket, Cap and Stopper. Fits Rubbermaid Essence Gott Some RotopaX Kolpin Blitz 3pcs
SCITOO Compatible with Gas Can Spout Replacement with Gasket, Cap and Stopper. Fits Rubbermaid Essence Gott Some RotopaX Kolpin Blitz 3pcs
SCITOO 3 Gas Can Spout Replacement with Gasket, Cap and Stopper. Fits Rubbermaid Essence Gott andamp; Some RotopaX Kolpin Blitz. Product description:Condition: 100% Brand NewMaterial: RubberColor: BlackPackage Weight: approx. 0.02KGPackage list:3 White Flex Spout3 Rubber Gasket3 Spout Cap3 Spout Stopper Cap3 Vent Cap.
- ASIN: B07K8LLSSG
- Brand: SCITOO
- Manufacturer: SCITOO
OCPTY Gas Can Spout Replacement with Gasket, Cap and Stopper. Fits Rubbermaid Essence Gott Some RotopaX Kolpin Blitz 3pcs
OCPTY Gas Can Spout Replacement with Gasket, Cap and Stopper. Fits Rubbermaid Essence Gott Some RotopaX Kolpin Blitz 3pcs
These Stopper Caps double as a Spout Cap (for Gott andamp; Rubbermaid spouts) and as a Stopper when hiding the spout inside the can for storage or transport, If you have an older Blitz, Rubbermaid, Gott, Kolpin, RotopaX or other fuel container, these replacement are exactly what you need. Product description1-1/2" OD - made to stretch slightly when applied to Gas Spout, approx. 1-1/4" opening and approx. 3/16" thick with a groove /u seal in the middle to stay on the bottom of the gas spout ridge - please double check your required measurements.
- ASIN: B07LF2BZXX
- Brand: OCPTY
- Manufacturer: OCPTY
EZ-POUR Rigid Replacement Spout & Vent Kit for Water Jugs and Pre-2009 Gas Cans
EZ-POUR Rigid Replacement Spout & Vent Kit for Water Jugs and Pre-2009 Gas Cans
Can be used in new cars with capless design. Attaches to other EZ-POUR spouts. Kit contains EZ-POUR Rigid spout and cap 1/2" replacement push in vent Flame arrester Yellow and black base caps* *Yellow cap is coarse thread and typically fits Midwest, Scepter and our Chilton adapter, Jerry can adapter, No Spill adapter, and Racing Jug adapter. Black cap is fine thread and typically fits older Briggs and Stratton, Rubbermaid, Essence , Blitz and Gott cans.
- ASIN: B07S42B8T9
- Brand: EZ-POUR