Sabrent 4-Bay USB 3.0 SATA 2.5"/3.5" SSD/HDD Docking Station (DS-U3B4)

Sabrent 4-Bay USB 3.0 SATA 2.5"/3.5" SSD/HDD Docking Station (DS-U3B4)

The Sabrent DS-U3B4 4-Bay USB 3.0 SATA 2.5/3.5 SSD/HDD Docking Station allows you to insert your standard 2.5” or 3.5” drive(s) into the docking station bays and instantly access drive content/transfer data on up to 4 hard drives at one time; fully hot-swappable. The Sabrent 4-Bay Docking Station requires no installation, no enclosure assembly, no software, and no driver downloads; just plug and play. Employ your Sabrent 4-Bay Docking Station to promptly clone your drives with just the push of a button. Features: Tool-free installation, plug and play, hot swappable. Transfer speeds up to 5Gbps. Supports four SSD/HDD drives, 2.5”or 3.5,” at one time. Backwards compatible with USB 2.0/1.1. LED indicators. Compatible with: Windows OS. Mac OS 10.X or Higher. Power Supply Specifications: AC Adapter. Input: 100-240V, 50/60 hZ 2A Max. Output: 12V =6.5A. Box Contents: 4-Bay HDD Docking Station. USB cable. Power adapter. User manual.

  • UPC: 819921016225
  • ASIN: B07H11KXCL
  • Brand: Sabrent
  • Manufacturer: Sabrent

StarTech Universal Hard Drive Docking Station - SATA and IDE Dock - 2.5in & 3.5in HDD and SSD Docking Station with UASP & SATA III (UNIDOCKU33)

StarTech Universal Hard Drive Docking Station - SATA and IDE Dock - 2.5in & 3.5in HDD and SSD Docking Station with UASP & SATA III (UNIDOCKU33)

This USB 3.0 Universal HDD / SSD Dock enables you to instantly access your 2.5 or 3.5" IDE and SATA hard drives through two top loading drive slots, saving you the hassle of mounting the drives into a computer or external enclosure or tray.Enhanced with UASP (USB Attached SCSI Protocol), this hard drive docking station lets you get the most out of the fastest drive technologies such as SATA III (6Gbps), solid state drives (SSD) and hybrid, drives with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. The slot-loading design holds the SATA and IDE drives upright inside the docks, keeping them off the desk, for convenience and a clutter-free setup. For SATA drives, the HDD can be inserted and connected directly through the designated dock slot, while the IDE drive slot is positioned near the rear panel 40-pin data and LP4 power connections, making it easy to connect to the dock using the included IDE data and power cables.A single USB 3.0 connection to your host computer, enables access to both the IDE & SATA hard drives simultaneously - a convenient solution for migrating data from an IDE drive to a SATA drive or vice versa. The dock can also be used to increase the storage and backup capabilities of your computer system with support for high capacity drives (tested with up to 6TB 3.5" and 2TB 2.5" drives). UNIDOCKU33 is backed by a StarTech.com 2-year warranty and free lifetime technical support. Improved Performance with UASP UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.

  • UPC: 065030859813
  • ASIN: B00T0ZRAOK
  • Brand: StarTech
  • Size: 2-Bay
  • Manufacturer: STARTECH.COM

StarTech.com HDD Docking Station - USB 3.0 to 2.5/3.5in SATA Hard Drive Dock with Standalone HDD/SSD Eraser and Clone (SATDOCK2REU3)

StarTech.com HDD Docking Station - USB 3.0 to 2.5/3.5in SATA Hard Drive Dock with Standalone HDD/SSD Eraser and Clone (SATDOCK2REU3)

The HDD Docking Station with Duplicator and Eraser Dock lets you connect your 2.5in/3.5in SATA HDDs or SSDs through SuperSpeed USB 3.0, with the ability to swap drives in and out as needed. The dock also functions as a standalone drive duplicator and eraser – an efficient and versatile solution for external drive management. Simple Hard Drive Duplication and Erasing Featuring standalone Sector by Sector hard drive duplication with built-in LED progress bar, and support for 2 drive single pass over writing the USB 3 to SATA HDD dock is a user-friendly all-in-one solution for any application requiring hard drive duplication or erasing. Maximum Compatibility With support for SATA I/II/III, and large capacity drives (tested up to 4TB) this hard drive cloner is compatible with virtually any SATA hard drive, and greatly increases the storage/backup capabilities of your computer. Extend the value of this USB 3.0 hard drive duplicator station further with the addition of our SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in. IDE hard drive into a SATA hard drive dock. The HDD docking station is backed by a 2-year StarTech.com warranty and free lifetime technical support.

  • UPC: 797045617705
  • ASIN: B00G6TG5YE
  • Brand: StarTech
  • Size: USB 3.0
  • Manufacturer: STARTECH.COM

Sabrent USB 3.0 to SATA I/II/III Dual Bay External Hard Drive Docking Station for 2.5 or 3.5in HDD, SSD with Hard Drive Duplicator/Cloner Function [10TB Support] (EC-HD2B)

Sabrent USB 3.0 to SATA I/II/III Dual Bay External Hard Drive Docking Station for 2.5 or 3.5in HDD, SSD with Hard Drive Duplicator/Cloner Function [10TB Support] (EC-HD2B)

The Sabrent SATA hard Drive docking station enables you to access desktop or laptop hard drives, without the frustration of assembling hard drive enclosures. By inserting a 2. 5"/3. 5" Sata hard Drive directly into this docking station, you can quickly access drive contents and transfer files. Plus you can swap out hard drives effortlessly With plug and play mounting. Transfer data quickly and easily through USB 3. 0 at speeds up to 5Gbps. to use Hard drive offline clone function: 1. Insert source disk into hard drive bay A, then insert target disk into hard drive bay B. 2. Make sure that the USB cable is disconnected from your computer. 3. Connect power supply and switch on power. 4. Hold down the clone button, release when you see a blue LED. 5. Then quickly press the clone button. 6. A blue LED will flash on 25% indicating that the cloning process has begun. 7. The cloning process is complete when all the lights turn solid blue (25%-100%). 8. Finally press the power switch to the off position and eject your drives. system requirements: Windows Mac: OS package Contents: docking station power supply USB 3. 0 cable user Manu

  • UPC: 819921013699
  • ASIN: B0759567JT
  • Brand: Sabrent
  • Size: Two Bay
  • Manufacturer: Sabrent

Inateck SATA Hard Drive Docking Station, USB 3.0 SSD Docking Station,Dual Bay,FD2005

Inateck SATA Hard Drive Docking Station, USB 3.0 SSD Docking Station,Dual Bay,FD2005

Supports up to 16 TB Inateck's attractive gamer style FD2005 is an excellent solution for transferring and organizing data on SSD & HDD SATA drives. It features two docking ports that can be used simultaneously and support drive up to 16 TB! Offline Cloning Don't have a computer? No problem! FD2005 supports computer free offline cloning! Only offline clone can be supported. UASP Superspeed We've included the ASM1156 chip in it. This supports UASP, which means dependable, high-quality data transfers to and from your external hard drive at speeds up to 6 Gbps! Auto-Sleep Function The FD2005's automatic sleep function is an excellent feature. It conserves energy and prevents overheating, but this wasn't enough. We had to make sure this feature was user friendly and we did just that using an intuitive LED lighting system. Intuitive LED Lighting System The left-hand light and right-hand light will turn blue respectively when either Disk A or Disk B are inserted, and will flash when either is activated. Four blue LED lights clearly track your data's progress during offline cloning from 25% to 50%, 75% and finally 100%. Attention -The target disk must be larger than the source disk. -Please backup files in the target hard drive before cloning. Any files in target hard drive will be overwritten when offline cloning occurs. -To avoid data transfer errors, overheating and damage to the device please make sure that there are no faulty driver cells. -To avoid data loss, do not remove or insert drives when one drive is working in the docking station. Please power off the docking station before removing.  

  • ASIN: B06XYL599P
  • Brand: Inateck
  • Size: Two Bay
  • Manufacturer: Inateck

WAVLINK USB 3.0 to SATA (5Gbps) Dual-Bay Hard Drive Docking Station for 2.5 inch/3.5 Inch HDD,SSD Support Offline Clone/Backup/UASP Functions [10TB×2 ]-Black

WAVLINK USB 3.0 to SATA (5Gbps) Dual-Bay Hard Drive Docking Station for 2.5 inch/3.5 Inch HDD,SSD Support Offline Clone/Backup/UASP Functions [10TB×2 ]-Black

What Does This Product Do? Wavlink Dual Bay HDD/SSD Storage Docking Station ST334U, allows you to install and access SATA drives quickly, it is a perfect solution for data recovery, drive imaging, and testing centers, or any environment requiring fast access to uninstalled/archived drives. Hard Drive Duplicator Function HDD A----Source HDD HDD B----Target HDD 1.Make sure there are no connection on the USB. 2.Ensure the Power Switch on the rear is in the OFF Position and plugged in properly. 2. Insert the HDD A in the rear near the power plug and insert the HDD B in the front. 3.Offline clone is from HDD A to HDD B. Make sure your Main Drive is in HDD A and slave in HDD BThe capacity of HDD B must be equal or bigger than HDD A. 4. Press and hold the offline clone button for 3 seconds, the LED indicator will light up. Then quickly press the offline clone button and the offline clone operation will start. Each LED represents 25% completion. It is only when every 25% of HDD A is offline clone to HDD B that such LED will remain constantly on. When offline clone operation is fully completed, all LEDs will constant on until the device is power off. Features:  * Support 2x 8TB hard drive; Supports 2.5" & 3.5" SATA (SATA I/ II/ III) HDD and SSD *Equipped with USB3.0; Support SATA III (6 Gbps) and UASP for optimal performance; Backward compatible with USB 2.0 /1.1 * On/Off power switch. LED light indicates Power and Activity status.  * Hot-swappable, plug and play, no drivers needed.  System Support: supports Win XP/Vista/7/8/8.1/10 and MAC OS X Backup Tool : http://www.win-star.com/download/Drivers/ST_V1.9.zipMAC 10.2 or above(mac not supports backup) What's in the box? 1 x Dual Bay SATA HDD Docking Station 1 x 12V 3A Power Adapter 1 x USB 3.0 Cable 1 x User's Manual 1 x Warranty Card

  • ASIN: B018FTE87S
  • Brand: WAVLINK
  • Manufacturer: WAVLINK

Inateck SATA Hard Drive Docking Station, USB 3.0 SSD HDD Docking Station, Dual Bay, FD2002

Inateck SATA Hard Drive Docking Station, USB 3.0 SSD HDD Docking Station, Dual Bay, FD2002

Hdd/SSD off-line duplicator cloning a HARD drive, No PC is required - just plug both hard drives, press "copy" Button for several seconds until the led will start flashing and the cloning process will begin. Progress indicator with LED: 25% - 50% - 75% - 100%. attention- the target disk must be larger than the source disk. - Please backup files in target hard drive before cloning. Any files in target hard drive will be overwritten when offline clone works. - Please make sure that there aren't any bad sectors on the drives in use, as to avoid data transfer errors, overheating and damage to the station. - when one drive is working in the docking station, please do not remove the other one or insert a new one until it's finished in case of data loss. Please power off the docking station before removing.

  • ASIN: B00N1KXE9K
  • Brand: Inateck
  • Manufacturer: Inateck

SISUN 2.5" / 3.5" IDE SATA HDD Docking Station +Card Reader Hub (Black)

SISUN 2.5" / 3.5" IDE SATA HDD Docking Station +Card Reader Hub (Black)

Why Need It -Directly exchange data between 2 different type HDDs(SATA and IDE), even for different size(3.5" and 2.5") of HDD. You can copy or back up your files conveniently. No need buy 2 or more external cases. Saves your money. How Easy -Only need one step, you can change HDD(2.5" or 3.5") to HDD(2.5" or 3.5") without screwdriver, and Stand next to you PC or Notebook. No more need open the external case. Save your time. High Capacity HDD Compatible High Capacity HDD Compatible You can install maximum 2x2TB hard drive at the same time. Give you much convenience for data exchange and backup. Special design for IDE hard drive. Now your old IDE/PATA hard drive could work for you again. Features: Hold maximum 2x2TB hard drive at the same time. Compatible with 2.5"/3.5" IDE/SATA hard drive Directly exchange data between 2 differetn size and different type HDDs Easily transfer data from your 2.5"/3.5" IDE or SATA hard drive to your computer through USB 2.0 and eSATA port. Integrates all-in-1 card reader(XD Card/TF Card/MS(Duo/Pro) Card/CF Card/SD Card) Integrates 2 USB ports Data transfer speed -USB2.0: up to 480Mb/s -eSATA: up to 3Gb/s Hot-Swap capability for rapid multi HDDs access & exchange No need add enclosure or open case with screwdriver. Compatible with all 2.5" or 3.5" IDE and SATA I/II hard drive up to 4 TB(4000GB, 2x2TB) capacity One Touch Backup(OTB) function(need install software) Plug & Play LED indicator Compatible with Windows 98/SE/ME/2000/XP/Vista/7/8/10,Linux, Mac OS 9.x or above *HDD is NOT included!!!!! *Card reader functioin works with USB connection only *Use IDE HDD,Please Slide the IDE power push button to the correct side( 3.5" IDE slot) if the LED power light turn on. *This dock can not clone any hard drive.

  • ASIN: B009F7TXMK
  • Brand: Sisun
  • Manufacturer: SISUN

Hard Drive Docking Station, FIDECO USB 3.0 HDD Docking Station Dual-Bay External Hard Drive Docking with Offline Clone/Duplicator Function for 2.5" & 3.5" SATA HDD SSD, Support TF & SD Card (2x 12TB)

Hard Drive Docking Station, FIDECO USB 3.0 HDD Docking Station Dual-Bay External Hard Drive Docking with Offline Clone/Duplicator Function for 2.5" & 3.5" SATA HDD SSD, Support TF & SD Card (2x 12TB)

Supports up to 2x10TB Drives: FIDECO USB 3.0 dual Bay Hard Drive Docking Stations Maximum Capacity of 2x 10TB, Compatible with 2.5 & 3.5 Inch SATA I / II / III Hard Drives. Offline Clone Function: When cloning a hard drive, make sure that the USB cable is disconnected from any computer - Simply connect both hard drives, press the 'Clone' button for 3 seconds until the LED starts to flash and the cloning process begins. Progress indicator with LED: 25% - 50% - 100%. USB 3.0 TF/SD Slot Designed: It offers more convenience and easily transferring high-resolution images and video recordings, support USB 3.0 TF/SD card (Not included USB 3.0 TF/SD Card). Stable SuperSpeed: Superspeed and stable power supply DC 12V 4A power for hard drive use steadily, up to 5 Gbps transmission rates USB 3.0. Specification: Name: Hard Drive Docking StationCable Length (USB 3.0 Cable/Power Adapter): 1.2m/1.5m Material: Aluminum Alloy + ABS Plastic Interface Type: SATA USB Port: USB 3.0 Type A Input Current: 0.8A Input Voltage: 110-240V AC Output Current: 3A Output Voltage: 12V DC Size: 11.3x10.3x6.95cm Weight: 300g Range of Application: 2.5'' /3.5'' HDD SSD SATA I II III Drives Support Devices: PS4, Xbox, TV, Monitoring Equipment Compatible System: For Windows XP / Vista / Windows 7 / Windows 8 / Windows 8.1 / Windows 10 and MacOS 10.4 to 10.11. Package Included: 1x USB 3.0 FIDECO Docking Station (Not included HDD/SSD) 1x 12V 4A DC Power Adapter 1x USB 3.0 Data Cable 1x User Manual

  • UPC: 703064089119
  • ASIN: B07D6L5CJF
  • Brand: FIDECO
  • Manufacturer: FIDECO

WAVLINK USB 3.0 to SATA Dual-Bay External Hard Drive Docking Station with UASP for 2.5/3.5-inch HDD SSD, Hard Drive Duplicator Offline Clone Function (2 x 10TB Support)

WAVLINK USB 3.0 to SATA Dual-Bay External Hard Drive Docking Station with UASP for 2.5/3.5-inch HDD SSD, Hard Drive Duplicator Offline Clone Function (2 x 10TB Support)

What Does This Product Do? Wavlink Dual Bay HDD/SSD Storage Docking Station ST334U, allows you to install and access SATA drives quickly, it is a perfect solution for data recovery, drive imaging, and testing centers, or any environment requiring fast access to uninstalled/archived drives. Hard Drive Duplicator Function HDD A----Source HDD HDD B----Target HDD 1.Make sure there are no connection on the USB. 2.Ensure the Power Switch on the rear is in the OFF Position and plugged in properly. 2. Insert the HDD A in the rear near the power plug and insert the HDD B in the front. 3.Offline clone is from HDD A to HDD B. Make sure your Main Drive is in HDD A and slave in HDD BThe capacity of HDD B must be equal or bigger than HDD A. 4. Press and hold the offline clone button for 3 seconds, the LED indicator will light up. Then quickly press the offline clone button and the offline clone operation will start. Each LED represents 25% completion. It is only when every 25% of HDD A is offline clone to HDD B that such LED will remain constantly on. When offline clone operation is fully completed, all LEDs will constant on until the device is power off. Features:  * Support 2x 8TB hard drive; Supports 2.5" & 3.5" SATA (SATA I/ II/ III) HDD and SSD *Equipped with USB3.0; Support SATA III (6 Gbps) and UASP for optimal performance; Backward compatible with USB 2.0 /1.1 * On/Off power switch. LED light indicates Power and Activity status.  * Hot-swappable, plug and play, no drivers needed.  System Support: supports Win XP/Vista/7/8/8.1/10 and MAC OS X Backup Tool : http://www.win-star.com/download/Drivers/ST_V1.9.zipMAC 10.2 or above(mac not supports backup) What's in the box? 1 x Dual Bay SATA HDD Docking Station 1 x 12V 3A Power Adapter 1 x USB 3.0 Cable 1 x Software CD Disk 1 x User's Manual 1 x Warranty Card

  • ASIN: B07C9RSZFM
  • Brand: WAVLINK
  • Manufacturer: WAVLINK