Woodland Scenincs - Hot Wire Foam Cutter - 9VAC

Woodland Scenincs - Hot Wire Foam Cutter - 9VAC

The Hot Wire Foam Cutter has adjustable collars allowing for clean, accurate cuts in foam. Woodland Scenics recommends using only on SubTerrain white foam which emits no toxic fumes. Use only special nichrome replacement wire. The throat of the Hot Wire Foam Cutter is 4.5" wide by 5.5" deep. Input: 120VAC and Output: 9VAC, 1300mA.

  • UPC: 698887671477
  • ASIN: B0006KSMEU
  • Brand: Woodland Scenics
  • Manufacturer: Woodland Scenics

Ansen Tools AN-161 Pro-Grade 11-Inch Long Reach Diagonal Pliers

Ansen Tools AN-161 Pro-Grade 11-Inch Long Reach Diagonal Pliers

These pro-grade, 11" long reach pliers are uniquely designed for confined or hard to access areas. They have machined jaws for maximum gripping strength. They are manufactured with a drop-forged, heat treated, high carbon steel. They have cushioned, non-slip handle grips. The meet or exceed ANSI specifications.

  • UPC: 661799883085
  • ASIN: B00B21CGN0
  • Brand: Ansen Tools
  • Manufacturer: Ansen Tools

Hot Wire Foam Factory 2' X 4' Compound Bow Cutter

Hot Wire Foam Factory 2' X 4' Compound Bow Cutter

The versatile 2' x 4' Compound Bow Cutter (actually a little wider than 2' and 4') will easily cut 4' by 8' blocks or sheets of foam. Built for commercial and professional use, it's fast and agile and built to last. Now comes with even more powerful multi-heat selection power supply. It is 1/3 the price of other, whimpier bows, and ours is made in USA. Changes direction of cut instantly and cleanly. Convenient switch is right on the tool and thick round tough rubber coated tubing makes for a firm, comfy grip. The Bow quickly collapses for shipping and storage. Our Hot Wire tools work best on rigid polystyrene foams, also known as expanded polystyrene (also known as EPS, Styrofoam or bead-board foam) and extruded polystyrene foam (also known as XEPS or XPS or insulation foam). If you are unsure whether or not this tool will cut the foam you intend to cut, please contact us before buying. The Hot Wire tools will cut many kinds of foam, but always check with the foam manufacturer to make sure there are no health or safety hazards when using hot wire tools. NOTE: Polyurethane foam (aka upholstery/camera case foam) should not be cut with hot wire tools.

  • ASIN: B008DJF6D6
  • Brand: Hot Wire Foam Factory
  • Manufacturer: Hot Wire Foam Factory

ROY-ROJAS Hot Wire Foam Cutter Machine,Adjustable Temperature up to 300℃/572F,24W 3D Foam Cutter, Styrofoam Cutter,23"x 15" Table Foam Circle Cutter,for Foam Carving Modeling and Crafts DIY

ROY-ROJAS Hot Wire Foam Cutter Machine,Adjustable Temperature up to 300℃/572F,24W 3D Foam Cutter, Styrofoam Cutter,23"x 15" Table Foam Circle Cutter,for Foam Carving Modeling and Crafts DIY

DIY Christmas tree  and  decorations : It is Easy to DIY your own unique Christmas tree and lots of creative DIY christmas crafts once you have this foam cutter .  A variety of Shapes : You can Easily cut the foam board or block into your desired shape such as cylinder,cone,taper,cube,polygon ,by adjusting the angle of hot wire.  Faster & Smoother & Precise : this Foam Cutter heats up quickly,  The hot wire can reach the high temperature of 300℃/572F in 5 seconds ,so it can cut the foam smooth and fast, seals the edges clean without leaving  debris.Big table with scale indication , guide rule, help you to cut foam into your shape precisely. 4 Adjustable table legs to adapt rough surface .  Adjustable temperature : The temperature can be adjusted from 50℃  - 300℃ to fit different materials Multipurpose : Craft DIY, model  making , geometry models, commercial artwork,  art piece creation,  foam carving,geometry models, perfect for both Home and School Notice: We put the foam models in  image for easy understanding, they are not included in the package.  Package Included: 1x Foam Cutter 1x Power Adapter 1x Cutting Circle Aid Specification  Product name:Foam Cutting Machine Table material:Wood Color:Black  Product size: 38x58cmx34cm / 14.9"x22.8"x13.4" Temperature:50-300℃/ 122- 572F Plug:US  Power: 24W Power Adapter input : AC 100 -240V Power Adapter output : 1-12V (100 -2000 mA)(adjustable)

  • UPC: 716150773229
  • ASIN: B07FDB42GL
  • Brand: ROY-ROJAS
  • Size: 10"cutting height
  • Manufacturer: ROY-ROJAS

200W Nordstrand Pro Electric Hot Knife Styrofoam Foam Cutter Tool - with Blades & Accessories

200W Nordstrand Pro Electric Hot Knife Styrofoam Foam Cutter Tool - with Blades & Accessories

Shape and trim hard foam Whether you're fitting ceiling tiles or creating an artwork, being able to shape hard foam quickly and accurately can transform your day. The Nordstrand Styrofoam Thermal Cutter requires no special training or skills, and allows you to create straight edges or complex shapes with no mess and no fuss. No-mess foam cutting solution The Nordstrand Thermal Cutter cuts cleanly and smoothly. As the heat reacts with the foam, it cuts without leaving the dust and debris common when using a conventional knife. With no dust or polystyrene filings left behind, cleaning up is easy. Designed for commercial and industrial use, it's a popular choice for hard foam modelling, DIY and construction. Like a hot knife through butter Reaching cutting temperature in as little as 10 seconds, the Nordstrand cutting system slides through hard foam with little resistance. It's easy to manoeuvre, making it possible to cut freehand shapes or to easily follow a guide. It's ideal for construction work, as it's easy to cut pieces to fit, whether you're trimming a tile or shaping an outlet point. How to use the Nordstrand Thermal Cutter The cutter is designed for use on hard foams, including: Styrofoam, Polystyrene (PS), PUR rigid foam, Neopor, Polyurethanes and PU foam. This is a hot knife system, with a blade that can be as hot as 500C (932F). It's therefore critical that you read and fully understand the operating instructions before using the cutter. This set includes power cable, cutter body, carrying case, instruction manual, cleaning equipment and two straight blades (150mm and 200mm)

  • ASIN: B016UY8FJM
  • Brand: Nordstrand
  • Manufacturer: Nordstrand

Motosupply 2 Seats 12V Universal Heated Seat Heater Kit Fit Toyota car Safety seat Heater configurations

Motosupply 2 Seats 12V Universal Heated Seat Heater Kit Fit Toyota car Safety seat Heater configurations

Features: This Toyota switch seat heater fit many model Toyota series cars, trucks. Such as Prado, Landcruiser, RAV4, Corolla, Reiz, Camry, Yaris, Tundra, 4 runner, avalon, Prius, Tacoma, Venza, etc. If you have two blank slot on dashboard, it will ok. Specification: Heat pad dimension: 480 * 280¡À5mm (18.9 * 11 inch) Wiring harness length: 2.3 m (90 inch) Power rating: DC12V£¬27¡À3W /each pad Thermostat: 65 £«10/-5 ¡æ Package includes: 2 x Seat Heater Switch(left and right) 4 x Heating Pad 2 x Set of Wiring Harness

  • UPC: 652878775261
  • ASIN: B0119553TC
  • Brand: Motosupply
  • Manufacturer: xinyan

200W 110V Foam Cutter,Hot Wire Cutter Blade Machine Electric Handheld Heated Knife Rope Styrofoam Cutter Electric Hot Heating Knife (US Plug)

200W 110V Foam Cutter,Hot Wire Cutter Blade Machine Electric Handheld Heated Knife Rope Styrofoam Cutter Electric Hot Heating Knife (US Plug)

Notices: 1.Please make sure the tool is used under condition of ventilation. 2.Don't burn the residuum in the blade, the blade will be crooked. 3.Don't burn the blade without touching the cutting materials. 4.Don't touch the blade by hand when heating, and don't put the blade near to the inflammable after heating. 5.Handle the blade after cooling to avoid scalding. 6.Make sure the suitable output power and cutting speed, overheating will burn out the blade. 7.Intermittent operating for the tool, suggest that loosen the switch for a second after 30 seconds' working    Specification: Condition: 100% Brand New Model: HS-2001200 Material: Metal Color: Red Optional Style:  US Plug 110V Power: 200W Adjustable Temperature: 50-500℃ Weight: Approx. 760g / 26.8oz Blade Length: Approx. 22cm / 8.7in Size: Approx. 26 * 4.5 * 3.5cm / 10.2 * 1.8 * 1.4in   Package List: 1 * Foam Cutting Machine with Plug Cable 1 * Wrench 1 * Brush

  • UPC: 792117528668
  • ASIN: B07HT143J2
  • Brand: Walfront
  • Size: US Plug
  • Manufacturer: Walfront

Electric Rope Cutter - Hot Knife Thermal Blade for Paracord Cord Flat Braid Fabric Webbing Belting Ribbon - Electronic Bench Mount - 30W - (Orange)

Electric Rope Cutter - Hot Knife Thermal Blade for Paracord Cord Flat Braid Fabric Webbing Belting Ribbon - Electronic Bench Mount - 30W - (Orange)

Cut and seal rope in one step Includes everything you need to get started.This is the best choice for cutting rope, webbing, belts, ribbon, and cord. Super Fast, 10 seconds, reaches temperatures up to 1200° F. Huge blade easily makes clean cuts through rope up to 2in in diameter. The heat will seal the ends of rope made of plastic, nylon and similar materials as it cuts, so no extra effort is required. This is a great tool for home and business use, and is particularly popular with crafters, artists, climbers, sailors and other sporting enthusiasts. Quick, convenient and safe When properly used, the GOLBERG Electric Rope Cutter is a safe and convenient tool. It can be bench mounted, to increase safety. Super fast heating time saves energy, turn off when not in use. The blade is easily removed for cleaning. With average daily use the blade will typically last over 2 years. Technical specifications: • Voltage: AC120V/50HZ (Standard USA) • Power: 30W • Blade operating temperature: 0 - 1200° F • Blade size: 2 inches • Power cord length: 4 feet • Dimensions: 8 x 6.5 x 6.5 inches • Weight: 4 pounds

  • ASIN: B073JTSTPS
  • Brand: GOLBERG G
  • Manufacturer: GOLBERG G

Sheffield Bench Mount Electric Rope Cutter H2

Sheffield Bench Mount Electric Rope Cutter H2

Ultra fast heat-up time, under 10 seconds. Will cut through a 1" nylon line in less than 10 seconds 120 volts. Heats up to 1200° Fahrenheit cuts and heat seals at the same time comes with a 2-1/2" blade. Replacements blades are available. Lighted on/off rocker switch 6. 5 feet cord with ground.

  • UPC: 601431072002
  • ASIN: B00CP70IDU
  • Brand: Sheffield
  • Manufacturer: Sheffield

Foam Cutting Tool 250 Watt Hot Knife Sleeving and Rope Cutter with 10-Inch Blade and Carrying Case

Foam Cutting Tool 250 Watt Hot Knife Sleeving and Rope Cutter with 10-Inch Blade and Carrying Case

A must for jobs that require tedious foam, rope and braided sleeving cuts, the foam cutter will quickly cut and sear the edges to prevent fraying. The 45Watt hot knife quickly heats up and is stable for long continuous use for cutting Nylon, PET, PP materials. Since this hot knife is meant to be mounted, this leaves your hands free for efficient and safe use versus the handheld hot knives.

  • ASIN: B076PR1LXT
  • Brand: Electriduct
  • Manufacturer: Electriduct