Gentec 227C-150 Flow Regulator for Light Duty Applications

Gentec 227C-150 Flow Regulator for Light Duty Applications

GENTEC 227C-150 flow regulators are designed for light duty applications using carbon dioxide (CO2) or nitrogen (N2). Preset delivery pressure setting: 150 PSI. "Piston" type mechanism for reliability. Body machined from class "A" brass bar stock. Sintered bronze inlet filter. 1/4" NPT outlet port.

  • UPC: 743043016811
  • ASIN: B0085EVSOU
  • Brand: GTC Direct
  • Manufacturer: Genstar Technologies

Taprite T752HP Two Product Dual Pressure Kegerator CO2 Regulator

Taprite T752HP Two Product Dual Pressure Kegerator CO2 Regulator

The TAPRITE ADVANTAGE Taprite regulators are built and tested in accordance with UL Standard 252 for compressed gas Regulators and UL 252A for compressed gas regulator accessories All Taprite regulator components and accessories are inspected by our Quality Department upon receipt in accordance with the requirements of MIL-STD-105E High CO volumetric flow provides continuity in product dispensing Polycarbonate bonnet will not chip, break, or fade 10 Micron Filter built in to keep contaminants out of regulator One repair kit for primary and secondary regulators. WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.

  • UPC: 608938598721
  • ASIN: B0060NOX40
  • Brand: Taprite
  • Manufacturer: Taprite

AGPtEK Argon CO2 Mig Tig Flow meter Regulator CGA580 Welding Weld

AGPtEK Argon CO2 Mig Tig Flow meter Regulator CGA580 Welding Weld

Specification: Preset: 30 P.S.I. Flowmeter Range 10-60 SCFH inlet connection: CGA580 connection: female UNF9/16 with 1/4" barbed fitting Packaging included: 1*Pressure reducer 1*1/4" barbed fitting

  • UPC: 848454031771
  • ASIN: B0091C5HT2
  • Brand: AGPTEK
  • Manufacturer: AGPtek

OneBom CO2 Regulator, Keg Beer Regulator CGA -320 Inlet, with Pressure Relief Valve for Gas 0-3000PSI (Dual Gauge)

OneBom CO2 Regulator, Keg Beer Regulator CGA -320 Inlet, with Pressure Relief Valve for Gas 0-3000PSI (Dual Gauge)

Onebom concentrate on producing and selling high quality home brew products, you can get more surprise products from our store. Good products will bring you perfect experience for home brewing . Pls feel free to contact us if you have any questions or suggestions. We will reply you within 24h Description As a home brewer you might like to know as much as possible about your beer.This CO2 Regulator allows you to know how much you still have in the tank and how much it`s letting out. This CO2 Beer Regulator is perfect for not only knowing how much CO2 is in the cylinder, but also the ease of setting the pressure with the control knob and how the knob can be locked in place after you set it to your desired pressure. Features 1.Well made - This CO2 regulator features a durable chrome plated brass body ,lasts a long lifetime 2.The CO2 regulator comes with a safety manual pressure release valve releases at 45 PSI 3.You can use this CO2 regulator to carbonate plain water to get super cheap seltzer/soda/carbonated water. 4.The CO2 regulator does a great job holding a steady pressure, and pressure is easy to adjust with the knob with no tools needed. 5.Slap this CO2 regulator on a food grade CO2 tank, connect a gas line ( ID 5/16'') and carbonator ,and you have a lot cheaper carbonated water than buying carbonated water bottles directly. Specification Gauge Size : 2.2'' Barb Size: 5/16'' Body: Chrome plated brass Tank Pressure Gauge:0-3000psi Keg Pressure Gauge: output 0-60psi Female Nut: for CGA-320 CO2 canister ON/OFF Valve: flow control the gas Package Includes 1 x CO2 Regulator (CGA-320) 1 x User Manual Warm Tips: DO NOT increase the pressure adjustment knob over 45PSI to prevent leakage.There is a red mark on the dial to notify you.Beer working pressure:10-30PSI

  • UPC: 634759531845
  • ASIN: B07DC48YYL
  • Brand: OneBom
  • Size: Dual Gauge

High Flow Adjustable Not Fixed Co2 Regulator Offroad Jeep Tires DIY T87061

High Flow Adjustable Not Fixed Co2 Regulator Offroad Jeep Tires DIY T87061

T87061. You are viewing a precision custom machined billet aluminum body super high performance fast flowing, non-freezing CO2-N2 Regulator capable of flowing over 45cfm at an adjustable 0-250psi maximum flow rate. This regulator is perfect for any application and performs well reseating tires, running air tools and just about anything needing compressed Co2!!!
Aesthetically, this regulator is show quality for that show quality off roader, but durable enough for the real hardcore rock crawler. This regulator is perfect for building DIY tire inflation systems. Adjustable High Flow 0-250PSI 45CFM - Fast tire filling Solid Machined Light Weight clear Aluminum Body Liquid filled gauges for durability! Comes with a quick connect if you need it. (Regulator body has 1/4" FNPT outlet for your own accessories) CGA320 Tank Connection - Works on any standard beverage cylinder - 5#, 10#, 15# or 20# Co2. Just make sure valve is stamped CGA320.Limited Supply- inventory remaining is all that is left. Liquidation.BUY IT NOW AUCTION $69.95 - GUARANTEED QUALITYUSPS priority TWO YEAR WARRANTY!!!!!!USPS priority Mail shipping 1-3 days anywhere!!!*** GUARANTEED GOOD

  • ASIN: B07R1RRDCN
  • Brand: VGS
  • Manufacturer: VGS

High Flow Adjustable Not Fixed Co2 Regulator Offroad Jeep Tires DIY

High Flow Adjustable Not Fixed Co2 Regulator Offroad Jeep Tires DIY

You are viewing a precision custom machined billet aluminum body super high performance fast flowing, non-freezing CO2-N2 Regulator capable of flowing over 45cfm at an adjustable 0-250psi maximum flow rate. This regulator is perfect for any application and performs well reseating tires, running air tools and just about anything needing compressed Co2!!!
 Aesthetically, this regulator is show quality for that show quality off roader, but durable enough for the real hardcore rock crawler. This regulator is perfect for building DIY tire inflation systems. Adjustable High Flow 0-250PSI 45CFM - Fast tire filling Solid Machined Light Weight clear Aluminum Body Liquid filled gauges for durability! Comes with a quick connect if you need it. (Regulator body has 1/4" FNPT outlet for your own accessories) CGA320 Tank Connection - Works on any standard beverage cylinder - 5#, 10#, 15# or 20# Co2. Just make sure valve is stamped CGA320. Limited Supply- inventory remaining is all that is left. Liquidation.

  • UPC: 641753897808
  • ASIN: B07MB86X3V
  • Brand: No Flow
  • Manufacturer: Gogad

Safari USA 03 Hydroponics Co2 Regulator Emitter System with Solenoid Valve Accurate and Easy to Adjust Flow Meter Made of Brass - Shorten up and Double Your Time for Harvesting

Safari USA 03 Hydroponics Co2 Regulator Emitter System with Solenoid Valve Accurate and Easy to Adjust Flow Meter Made of Brass - Shorten up and Double Your Time for Harvesting

Designed and Manufactured by- Safari USA Why Safari USA CO2 Regulator? Firstly, It is CE APPROVED. Which means it will not overheat. Safari USA CO2 regulator is made by us from precision instruments designed in the U.S. It will ensure that the level of carbon dioxide is kept at the desired level. It uses inferred monitoring equipment to continuously read the levels of carbon dioxide. When the levels drop below optimal it will turn on your equipment. When levels are optimal it turns off the equipment. You can turn off our regulator during the night because the plants do not need carbon dioxide at night. Model # MDC99003

  • UPC: 663250225410
  • ASIN: B07MS5BC1T
  • Brand: Safari USA

MANATEE Argon Regulator TIG Welder MIG Welding CO2 Flowmeter 10 to 60 CFH - 0 to 4000 psi pressure gauge CGA580 inlet Connection Gas Welder Welding Regulator More Accurate Gas Metering Delivery System

MANATEE Argon Regulator TIG Welder MIG Welding CO2 Flowmeter 10 to 60 CFH - 0 to 4000 psi pressure gauge CGA580 inlet Connection Gas Welder Welding Regulator More Accurate Gas Metering Delivery System

Whether you are a welding beginner or a seasoned professional, you will surely enjoy using the Argon Regulator! For those who want more accurate delivery system, Our Argon CO2 Refulator Flowmeters is the answer! Feature Perfect for all TIG and MIG Welding application. More precise gas metering. The output flow is adjustable from 10 to 60 cfh (cubic feet per hour) Pressure gauge : 0 - 4000 PSI Fits CGA - 580 Tank Fitting so it fits all argon, helium, nitrogen, and argon/CO2 mixed gas tanks. Welders around the nation agree that the Argon Flow Meter Regulator is key to accurate gas meter readings! Guarantee HIGH QUALITY! >> Hurry! Scroll Up & Click the yellow "Add to Cart" button now! Pay for the Quality Argon Regulator perfect for TIG and MIG Welding Applications that is more accurate gas delivery system. Order Now!

  • UPC: 850003609010
  • ASIN: B072PTFVNL
  • Brand: MANATEE
  • Manufacturer: BUBBLEBAGDUDE

Keg Regulator CO2, MRbrew Kegerator Regulator CGA-320, 0-60 PSI Working Pressure, 0-3000 PSI Tank Pressure, Beer Regulator, Co2 Pressure Regulator with Safety Pressure Relief Valve

Keg Regulator CO2, MRbrew Kegerator Regulator CGA-320, 0-60 PSI Working Pressure, 0-3000 PSI Tank Pressure, Beer Regulator, Co2 Pressure Regulator with Safety Pressure Relief Valve

MRbrew Double Gauge CO2 Regulator, which has been specially designed to provide maximum convenience and durability in busy commercial environments like bars, tasting rooms, and restaurants. ★The MRbrew Beer Keg Regulator works with any Co2 Tank with a CGA-320 valve.★Both gauges feature an easy to read design.★The top gauge lets you know how much Co2 Pressure is in the keg and displays 0-60 psi. ★The second gauge lets you know how much Co2 gas is left inside the Co2 Tank and features a 0-3000 display. So you'll never be caught off guard by an empty CO2 tank again.This brewery-grade beer regulator features a multi-stage body for more precise control when making small adjustments to the output pressure.The first stage reduces the output pressure from the tank to a more manageable pressure, and the second stage fine tunes that pressure for output to the kegAllowing adjustments to be optimized for the operational range of beer, wine, coffee or whatever you're dispensing. A large adjustment knob allows you to make quick and accurate adjustments by hand and turns effortlessly, even in freezing temperatures.The regulator body is constructed of forged brass with all brass connections and components, a sintered brass inlet filter, integrated nylon tank connection washer (and spare) and self resetting safety release valve. ★Hose barb end has been designed for use with 5/16" I.D. pressure tubing★5/16" barbed output for use with 5/16" ID hose★Integral safety pressure relief valve releases at 45 PSI★Large hand control makes it easy to adjust the presure inside keg★Inlet nipple has a permanent thick nylon seal that eliminates one source of leaks, so you will not need to use a new fiber washer every time the tank is changed👉 Regulators are all pressure tested to assure reliability in the field🎁 You have 1 Year Warranty Against Manufacturing Defects

  • ASIN: B07JWCSY9H
  • Brand: MRbrew

BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

100% Brand New. Color: GoldMaterial: Copper Size: 12cm(L)*7.5cm(W)*16CM(H) Compare the detail sizes with yours, please allow 1-2MM differs due to manual measurement Flow Meters are more accurate than the flow gauge regulators. The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi. The output flow is adjustable from 0- to 25 lpm, and is indicated by a ball which moves up and down in the flow tube, so this flow meter will handle MIG and TIG welding both steel and aluminum. The fitting is a CGA-580 fitting, so it fits all argon, helium, nitrogen, and argon/CO2 mixed gas tanks. This does not fit CO2 cylinders. If you want a CO2 Flowmeter see our auction for those. A very nice thing about this Flow meter is the outlet will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. You can see the adapter in the picture. It comes with a standard 1/4" barbed fitting. If you have a Miller, Lincoln, or Hobart welder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male nut. Package Content: 1 x Argon CO2 Flow meter

  • UPC: 745780992786
  • ASIN: B01I67VKFW
  • Brand: BETOOLL
  • Size: 0-4000Psi
  • Manufacturer: szbrt