Monoprice 5.1 Channel Home Theater Satellite Speakers And Subwoofer - Black

Monoprice 5.1 Channel Home Theater Satellite Speakers And Subwoofer - Black

Get everything you need for a great sounding home theater speaker setup in a single box! You get four satellite speakers and a center channel speaker for the mid- and high-range audio signals, plus an 8-Inch powered subwoofer to handle the low frequencies. All the speakers come with an attractive black finish and convenient spring-loaded signal connectors. The center speakers use two 3-Inch shielded mid-range cones, while the satellites employ one 3-Inch cone and a 1/2-Inch dome tweeter. However, don't let the small size fool you! These 8 ohm speakers will handle up to 125 watts of power from your home theater receiver at frequencies from 150 Hz to 20 kHz. The subwoofer is powered by a 60 watt (RMS) amplifier, driving a downward firing 8-Inch cone. It can take either line or speaker-level inputs, so can be used with any amplifier, even older amps without dedicated subwoofer outputs. The subwoofer handles frequencies between 50 Hz to 250 Hz and includes adjustable crossover frequency and volume balance controls. Also included in the box are four C brackets for mounting the satellite speakers to the wall and the necessary hardware for mounting the speakers to the brackets. A pair of plastic feet to properly orient the face of the center speaker is also included. Note that you will need to provide your own hardware for mounting the C brackets to the wall or other vertical surface. Don't let the low price fool you! This speaker system sounds great and will fill your room with high-quality, full-spectrum sound! Note: The speaker wire connectors on each unit comfortably accept a maximum 16 gauge speaker wire. For best results use pin-type speaker plugs to make the speaker connections and banana or pin-type plugs to connect the wires to your amplifier.

  • UPC: 844660082477
  • ASIN: B007YLQUWK
  • Brand: Monoprice
  • Size: W/8in Sub
  • Manufacturer: Monoprice Inc.

Monoprice 8-Channel Speaker Selector - Black With Impedance Matching Protection, Up To 200 Watts Per Ch. Perfect for Home Theater Audio

Monoprice 8-Channel Speaker Selector - Black With Impedance Matching Protection, Up To 200 Watts Per Ch. Perfect for Home Theater Audio

Spread your sounds around your home or business with this Monoprice 8-Channel Speaker Selector! This speaker selector allows you to connect up to eight stereo speaker zones. Each zone can be individually toggled on or off with the front panel switch. Built-in impedance-matching circuitry ensures that the overall impedance level to the amplifier does not drop below 5 Ohms no matter how many speaker zones are selected or how many speakers are in each zone. The impedance-matching protection circuitry can be disabled using a front-panel button but this should only be done if there is another protection circuit employed or the system is carefully designed to avoid amplifier damage. The unit can handle up to 100 watts per channel with the protection circuitry enabled and up to 200 watts per channel with the protection circuit disabled.

  • UPC: 710348863891
  • ASIN: B005E2YIAC
  • Brand: Monoprice
  • Size: 8-Channel
  • Manufacturer: Monoprice

Monoprice 11948 Premium Home Theater Center Channel Speaker44; Black

Monoprice 11948 Premium Home Theater Center Channel Speaker44; Black

Premium Home Theater Center Channel Speaker, BlackGet a great sounding center channel speaker to upgrade your current center speaker or to add a second to your system using this Premium Home Theater Center Channel Speaker from Monoprice! This speaker is identical to the center channel speaker included in our Premium 5.1-Channel Home Theater Speaker System (PID 10565). It features a 3" polypropylene mid-range driver and a 3/4" aluminum dome tweeter. It can handle up 100 watts of power and has an impedance of 8 ohms. The speaker handles frequencies from 110Hz to 20KHz ±3dB, with the crossover between the mid-range and tweeter drivers set to 3.5kHz. It measures about 4.3" x 10.2" x 4.3" (HWD) and weighs 3.0 lbs.

  • UPC: 757901820021
  • ASIN: B00WIU7GKM
  • Brand: Monoprice
  • Size: 4.3" x 10.2" x 4.3"
  • Manufacturer: Monoprice

Monoprice Choice Series 14 Gauge AWG 2 Conductor Speaker Wire / Cable - 100ft High Purity 99.9% Oxygen Free Pure Bare Copper For Home Theater, Car Audio And More

Monoprice Choice Series 14 Gauge AWG 2 Conductor Speaker Wire / Cable - 100ft High Purity 99.9% Oxygen Free Pure Bare Copper For Home Theater, Car Audio And More

Get the most out of your home audio system with high quality, oxygen free copper speaker wire from Monoprice. This wire features two conductors made of high purity (greater than 99.95% pure), oxygen free copper. One side of the clear outer PVC jacket is marked with a blue stripe to indicate polarity.

  • UPC: 701904303944
  • ASIN: B001UNLRGC
  • Brand: Monoprice
  • Size: 100ft
  • Manufacturer: Monoprice Inc.

Polk Audio PSW10 10" Powered Subwoofer - Featuring High Current Amp and Low-Pass Filter | Up to 100 Watts | Big Bass at A Great Value | Easy Integration Home Theater Systems

Polk Audio PSW10 10" Powered Subwoofer - Featuring High Current Amp and Low-Pass Filter | Up to 100 Watts | Big Bass at A Great Value | Easy Integration Home Theater Systems

PSW10 fills in the bottom end of your home theater system. Relieve your main speakers from performing bass duty and let them work on the mids and highs. PSW10 is a great addition to any subwooferless system and will bring your movie watching experience to the next level. All woofers feature a floor coupled downward firing port. This configuration brings you maximum bass impact while keeping the front of the cabinet as low profile as possible. All Polk products are made using the best materials and the most advanced manufacturing techniques. They pass the industry’s most exhaustive quality tests, including drop testing, extreme signal response and UV & salt exposure testing. Polk loudspeakers are built to perform for a lifetime. The voltage of the item is Standard US Voltage / 120 volts.

  • UPC: 747192118211
  • ASIN: B0002KVQBA
  • Brand: Polk Audio
  • Size: 10 Inch
  • Manufacturer: Polk Audio

Monoprice 300-Watt (150w RMS x2) Studio Audio Amplifier (605030)

Monoprice 300-Watt (150w RMS x2) Studio Audio Amplifier (605030)

Add 300 watts of clean and stable power to your studio rack using this 300-Watt Studio Audio Amplifier from Monoprice!This rack-mountable switching Class D amplifier packs 300 watts of power into a compact form factor, which takes up only 1U of rack space. It can be used as a stereo amplifier or can be bridged for mono mode.In stereo mode it produces 150 watts per channel RMS (300 watts per channel peak) into a 4-ohm load or 100 watts per channel RMS (200 watts per channel peak) into an 8-ohm load. When driving a 2-ohm load, it can produce 250 watts per channel RMS (500 watts per channel peak). When bridged for mono mode, the amplifier produces 500 watts RMS (1000 watts peak) into a 4-ohm load and 360 watts RMS (720 watts peak) into an 8-ohm load. Additionally, it is stable when using reactive or mismatched loads, so for example, you can connect a 2-ohm speaker to one channel and an 8-ohm speaker to the other without any problems.It features an extremely flat 20Hz ~ 20kHz (+0, -1dB) frequency response with less than 0.05% THD+N and more than 96dB signal-to-noise ratio. Built-in protection circuitry includes full short circuit, open circuit, thermal, ultrasonic, and RF protection. It also features power on/off muting function to prevent popping in the speakers when power is turned on or off. There is also a selectable limiter, which serves as a brick wall on volume to prevent high volume levels from driving the amplifier into clipping, which can cause speaker damage.Features: • Class D amplifier• High current switching power for high power output, low noise, and low distortion• Extremely flat 20Hz ~ 20kHz (+0, -1dB) frequency response with less than 0.05% THD+N• Balanced 1/4" TRS and XLR inputs• Unbalanced 1/4" TS and NL4 speaker twist speaker outputs• Built-in optional limiter helps prevent clipping• Short circuit, open circuit, thermal, ultrasonic, and RF protection• Stable with reactive and mismatched loads• Power on/off muting function• Separa... [Read More]

  • UPC: 889028001639
  • ASIN: B011JNVIYI
  • Brand: Monoprice
  • Size: 300-Watt
  • Manufacturer: Monoprice

OSD Audio 4-Zone Speaker Selector - 300W Dual Source with Volume Control - SSVC4

OSD Audio 4-Zone Speaker Selector - 300W Dual Source with Volume Control - SSVC4

The OSD Audio 4 Zone Speaker Selector is a great way to distribute sound to four listening zones and channels. It has a dual source with black brushed aluminum finish and up to 70 Watts per channel with protection engaged. Optimal Speaker Design is engaged in the design, engineering, and distribution of high-quality home and commercial audio products. Our products range in complexity from simple in-ceiling speakers to whole house audio systems—all with beautiful styling and high-end sound quality.Our U.S.-based research, development and design team, is supported by a network of cutting-edge acoustical, mechanical and electrical engineers. Together, we create products that combine the latest technology with ease of use for a quality sound experience.With extensive product and application knowledge, our exceptional team provides you with custom solutions to create the perfect audio solution.

  • UPC: 810281014548
  • ASIN: B002C8ZRGU
  • Brand: OSD Audio
  • Size: 4-CHANNEL
  • Manufacturer: OSD Audio

Monoprice 12 Inch 150 Watt Powered Subwoofer, Black (109723)

Monoprice 12 Inch 150 Watt Powered Subwoofer, Black (109723)

When you want your bass down low, you need a subwoofer as part of your home audio/theater system. Monoprice has the basses covered with this 12 inch, 150 watt (RMS) Powered Subwoofer model! This 12" sub is capable of producing 150 watts RMS (200 watts peak) output. It has a frequency response range of 50 to 250 Hz with a low-pass crossover filter, which can be adjusted through the full range. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers. The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output. High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier. The High-Level output can be used to connect to your stereo/front speakers or you can connect them in parallel at the amplifier. Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer. The Line Level outputs can be used to daisy chain additional subwoofers to provide even more room-filling bass! The subwoofer is housed i... [Read More]

  • UPC: 844660097235
  • ASIN: B00AJHAZZ4
  • Brand: Monoprice
  • Manufacturer: Monoprice

Monoprice 3-Way Fiber In-Wall Speakers - 8 Inch (Pair) With Removable And Paintable Grille - Caliber Series

Monoprice 3-Way Fiber In-Wall Speakers - 8 Inch (Pair) With Removable And Paintable Grille - Caliber Series

This Kevlar in-wall speaker offers the perfect combination of performance and style. The use of aramid fiber for the woofer means that the speaker can hit harder, go lower, and handle more power with significantly less distortion than conventional drivers. The titanium silk dome tweeter produces clean, crisp, and clear highs and mids. You can fine tune the blend of sound using the built-in high frequency attenuator in case your room is too bright. The metal grille can be painted to match your ceiling. Easy to install with simple hand tools, less time working and more time relaxing.All Caliber series in-wall and ceiling speakers are sonically matched to provide a uniform sound stage across you entire listening area. Simple two channel listening rooms to full screening rooms with 7.2.4 Atmos and DTS-X immersive cinema systems will benefit from the matched components of the Caliber series installation speakers.Model: 6816Frequency Response: 50 Hz ~ 20 kHzImpedance: 8 ohmsPower Handling Capacity: 100 watts Nominal, 200 watts maximumWoofer: 9"" Kevlar woven cone with 30 oz. magnet and rubber surroundMidbass: 3"" Kevlar woven cone with 5.4 oz. magnet and rubber surroundTweeter: 1"" Silk Membrane domeSensitivity: 90dB ±2dB (1.0m/2.83V)Crossover: 12dB per Octave (with -3dB, -6dB Switch)Cut-Out Dimensions: 12.8"" x 8.7"" 3.6"" (324 x 222 x 91 mm)Overall Dimensions: 14.1"" x 10.0"" x 3.9"" (357 x 255 x 100 mm)

  • UPC: 701904382505
  • ASIN: B004C4WJ68
  • Brand: Monoprice
  • Size: 8 Inch
  • Manufacturer: Monoprice Inc.

Monoprice 60-Watt Powered Subwoofer - 8 Inch With Auto-On Function, For Studio And Home Theater

Monoprice 60-Watt Powered Subwoofer - 8 Inch With Auto-On Function, For Studio And Home Theater

This is an 8-Inch powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers. The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output. High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier. Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA -Inch-Inch cable to split the output and send it to the two line level inputs on the subwoofer. The subwoofer is housed in an attractive black wood cabinet that measures 13.75-Inch x 11.75-Inch x 11.75-Inch (H x W x D). The driver and a 2 3/4-Inch sound port are located on the front, covered by a black cloth speaker grill.

  • UPC: 844660082484
  • ASIN: B009GUTJ34
  • Brand: Monoprice
  • Manufacturer: Monoprice Inc.