Crescent 56 Home Hand Tools Nail Pullers
Crescent 56 Home Hand Tools Nail Pullers
The Crescent 19-inch forged alloy nail Puller is a must-have for professionals and homeowners alike because of its utility and strength. It features a box-joint design with a hardened, tempered jaw and forged alloy construction that is built to last under rough jobsite conditions. Ready to tackle flush nails, the design is available with either a long jaw or a short jaw, both of which have a black enamel finish for extra durability.
- UPC: 037103462848
- ASIN: B00002N7SD
- Brand: Crescent
- Size: 4 inch
- Manufacturer: Crescent
ATP Blind Inner Bearing Puller Slide Hammer Set Hole Remover Extractor Set 5PCS
ATP Blind Inner Bearing Puller Slide Hammer Set Hole Remover Extractor Set 5PCS
ATP Blind Inner Bearing Puller Slide Hammer Set Hole Remover Extractor Set 5PCS Bearing Extractor Collets With Internal Capacity From 3/8" (10mm) To 1-1/4" (32mm) One Slide Hammer Assemble & ClampOpen Clamps By Turning Handle Clockwise To Snug Against The Bearing For Pulling Out Evenly Without Damage The Parts Fully Chromed Carbon Steel Open clamps by turning Handle clockwise to snug against the bearing for pulling out evenly without Damage the parts
- UPC: 687926000088
- ASIN: B075YRHWCM
- Brand: ATP
- Manufacturer: ATP
Slammer Hammer Large
Slammer Hammer Large
I ran across this tool totally by accident and saw the uses for it immediately. A few weeks ago I spent about 22 hours removing around 90 planner knives from an old Powermatic planner. If I would have had this tool I would have been able to remove them in less than one hour! Like so many great ideas it is simple. The manufacturer (here in the USA) took a threaded rod and attached it to a slide hammer. The threaded rod fits all US made Vise Grips so you can change out the tool with specialized vise grips you already own. Sure you could make your own but by the time you buy the Vise Grips and the slide hammer and weld it up you might as well by the Origina Slammer Hammer and support a US Small Business. Here are just a few uses. nail puller body and dent puller flywheel puller cotton pin puller pull rusted bolts moon key puller remove door hinges snowmobile track sliders dowel pin puller and much more The Slammer hammer is made of all steel construction with a removable aluminium handle for tight spots all parts are made in are shop right here in northwestern Ohio NOT China We ship all the Slammer Hammers with an American Made brand of vise grips. We have found that using a new, unworn set of grip works best. You can easily change out our set with yours if you use a special Vise Grip.
- ASIN: B00ICZH3IM
- Brand: Slammer Hammer
- Size: large
- Manufacturer: Toolco
OEMTOOLS 27033 5-Pound Slide Hammer
OEMTOOLS 27033 5-Pound Slide Hammer
The OEM 5 Lb. Slide Hammer Threaded 5/8 Inch x 18 works with OEM attachments as well as other manufacturers' attachments with the same thread. It comes in a sturdy blow-mold storage case with room to store other attachments.
- UPC: 076812270337
- ASIN: B004FEJGCU
- Brand: OEMTOOLS
- Size: 5 Lbs Slide Hammer
- Manufacturer: Great Neck Saw
BAHCO 38 17 3/4 Inch Nail Puller
BAHCO 38 17 3/4 Inch Nail Puller
High leverage design allows greater pulling torque for removing well-imbedded nails. Easy and fast operation for opening wood crates Hardened jaws for durability and long life.
- ASIN: B0001IX8XC
- Brand: Bahco
- Size: 17 inches
- Manufacturer: Snap-On Industrial Brand BAHCO
Crescent Cooper Tools 56 19" Forged Alloy Grip Nail Puller Hardened Tempered Jaw
Crescent Cooper Tools 56 19" Forged Alloy Grip Nail Puller Hardened Tempered Jaw
Cooper Tools 56 19" Forged Alloy Sure Grip Nail Puller w/ Hardened Tempered JawMade from a forged alloy, hardened and tempered jaw, box-joint and 24 inch full extension. Black enamel finish. Conforms to U.S. Fed. Spec. GGG-P-79lb, Type 1, Class-1.104851
- UPC: 732233467694
- ASIN: B01EMO0FL8
- Brand: Crescent Cooper
- Manufacturer: Crescent Cooper
Heavy Duty Slammer Hammer (slide tool) with Vise Grips
Heavy Duty Slammer Hammer (slide tool) with Vise Grips
Toolco's Slammer Hammer can be used for many different projects. It is good for pulling nails, body and dent puller, flywheel puller, cotter pin puller, dowel pin puller, moon key puller, door hinges, snowmobile track sliders, and tent stake remover and MANY more!! This is for the Heavy Duty slammer hammer with vise grips included.
- UPC: 611856382334
- ASIN: B0756MRG7X
- Brand: Toolco Inc.
- Manufacturer: Toolco Inc.
Crescent 56 Nail Puller by Crescent
Crescent 56 Nail Puller by Crescent
Box-joint, forged alloy, hardened and tempered jaw. Black enamel finish. Conforms to U.S. Fed. Spec. GGG-P-79lb, Type 1, Class-1. 16 penny nail Jaw Capacity. 19" Length.
- UPC: 752913157325
- ASIN: B01M1F5XJT
- Brand: Crescent
- Manufacturer: Apex Tool Group
Small slammer hammer with Deluxe Vise Grips
Small slammer hammer with Deluxe Vise Grips
The slammer hammer is made of all steel construction with a removable aluminium handle for tight spots.
- UPC: 611856382426
- ASIN: B07582778D
- Brand: Toolco Inc.
- Manufacturer: Toolco Inc.
PacTool International RS501 Roof Snake, Shingle Nail Puller, Roof Shingle Installer
PacTool International RS501 Roof Snake, Shingle Nail Puller, Roof Shingle Installer
- UPC: 787721665861
- ASIN: B00005A1K9
- Brand: PacTool
- Size: 1-(Pack)
- Manufacturer: PacTool International