4 Ft - 1/2" PEX Aluminum Heat Transfer Plates, (100/box) for Radiant Heating (HP-4) by PEX GUY

4 Ft - 1/2" PEX Aluminum Heat Transfer Plates, (100/box) for Radiant Heating (HP-4) by PEX GUY

This is a box of Genuine PEX GUY 4ft long Aluminum Heat Transfer Plates for 1/2" PEX tubing. Details: - Manufactured from stamped aluminum.- Nominal thickness of these plates is 0.016", with the length of 48" and the width of 4.38".- Compatible with all types and brands of 1/2" PEX tubing (5/8" OD). - Can be used for subfloor or sandwich type radiant heating installations to improve heat transfer properties of the system and lower the water supply temperature, thus reducing the heating bills. - Recommended spacing for parallel tubing runs is 8" OC. *** CALCULATIONS (assuming 8 inch spacing): Number of plates = sq area x 1.30 / length of plates *** - Example: 1000 sq ft area multiply by 1.30 = 1300ft of plates (650 plates of the 2ft version or 325 plates of the 4 ft version). Note: Do not overlap the ends of the plates, make sure you have at least 2-3 inches spacing from end to end.

  • ASIN: B009KT7PO6
  • Brand: PEX GUY
  • Manufacturer: PEX GUY

1/2" inch x 500ft Pex Tubing Oxygen O2 Barrier EVOH, Pex-B Red 500 ft for Radiant Floor Heat From VIVO (PEX-12H-R050)

1/2" inch x 500ft Pex Tubing Oxygen O2 Barrier EVOH, Pex-B Red 500 ft for Radiant Floor Heat From VIVO (PEX-12H-R050)

1/2" PEX Tubing with Oxygen Barrier (EVOH) is used for residential and light commercial radiant heating applications. With the same properties as PEX non barrier pipes, EVOH PEX barrier pipe keeps oxygen and other elements from infiltrating and corrupting the key mechanical components in heating systems. Tubing is marked every 5ft with length, ASTM standards, approvals, certifications, pressure ratings and other technical information. Warranty: Industry standard, 25-year manufacture's warranty. Applications: 1/2" PEX tubing w/ Oxygen Barrier is common for the following radiant floor heating applications -Structural concrete slabs (rebar or wire mesh reinforced slabs) -Non-structural slabs (thermal mass, gypsum slabs) -Staple-up (between joists) radiant floor heating with and without heat transfer plates -"Sandwich" types radiant heating (between subfloor and finished floor) -Snow & ice melting systems -Baseboard & radiator heating systems STANDARDS, CERTIFICATIONS & APPROVALS: -ASTM F876: Standard Specification for Crosslinked Polyethylene (PEX) Tubing -ASTM F877: Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems -CSA B137.5: Cross Linked Polyethylene (PEX) Tubing Systems for Pressure Applications -All Oxygen Barrier PEX Tubing we sell meets and exceeds DIN 4726 standard for Oxygen Barrier requirements -ANSI/NSF 14, NSF-rfh (certified for Radiant Heating applications) TECHNICAL DATA: -PEX type: PEX-b -PEX tubing size: 1/2" -OD: 0.625" -ID: 0.475" -Pressure ratings: 100psi @ 180F, 160psi @ 73F -Minimum bending radius: 5" (industry standard for 1/2" PEX) -SDR-9 dimensional standards; Pex 5006

  • UPC: 617401140763
  • ASIN: B00HFFB5AM
  • Brand: VIVO
  • Size: 500 ft
  • Manufacturer: Rifeng

2 Ft - 1/2" Omega Type PEX Aluminum Heat Transfer Plates, (100/box) for Radiant Heating (HPS-2) by PEX GUY

2 Ft - 1/2" Omega Type PEX Aluminum Heat Transfer Plates, (100/box) for Radiant Heating (HPS-2) by PEX GUY

Omega Type - 1/2" PEX snaps on to the plates. Box of (100), 2ft long, Heat Transfer Plates for 1/2" PEX tubing. Manufactured from stamped aluminum. Nominal thickness of these plates is 0.016", with the length of 24" and the width of 4.5". Compatible with all types and brands of 1/2" PEX tubing (5/8" OD). Can be used for subfloor or sandwich type radiant heating installations to improve heat transfer properties of the system and lower the water supply temperature, thus reducing the heating bills. Recommended spacing for parallel tubing runs is 8" OC.

  • ASIN: B00FBPPEO6
  • Brand: PEX Superstore
  • Manufacturer: PEX Superstore

WiseWater 2-Port Radiant Heat Manifold: PEX Tubing Radiant Heat Manifolds with Compatible Outlets, for Hydronic Radiant Floor Heating (1/2" PEX adapters sold separately)

WiseWater 2-Port Radiant Heat Manifold: PEX Tubing Radiant Heat Manifolds with Compatible Outlets, for Hydronic Radiant Floor Heating (1/2" PEX adapters sold separately)

This product provide a central control for hot and cold water that feeds flexible PEX supply lines to individual fixtures. Compared to rigid pipe plumbing systems, using this model is cheaper because of its size and ability to control many different zones from one place. Our radiant PEX manifold allows you to monitor the water's temperature and flow rate, set up automatic flow controls, drain the system, and more. This particular model is made of brass 57-3, has nickel-plating on the ball valve and air vent valve, and has 1" supply/return ports and 1/2" branch ports (can be converted to 3/4" by using adapters). This product has a 5 year warranty against manufacturer's defects.Product Features and UsageTemperature Gauge, displaying both Fahrenheit (120F) and Celsius (80C) for your convenience 1 extra cap on both drain valves can be used to put an outlet on standbyManual valves allow adjustment of flow rateShut-off valves on both supply and return outletsDrain valve can be used as an extra plumbing outletZone valve can be used to control different zones Air vent valve for purging air during the water filling process.Specifications of PEX Manifold Loops/Ways: 2 Flow Rate: Up to 1.6 GPM Connection Size (Supply / Branch): 1" NPT / 1/2" NPT Branch Outlet-Outlet Distance: 1.96"

  • ASIN: B074F9F2P9
  • Brand: AB
  • Size: 2 Loop
  • Manufacturer: AB

(10) Aluminum 180 Degree Return Radiant Floor Heat Transfer Plates for 1/2" PEX from Radiant Heat Store

(10) Aluminum 180 Degree Return Radiant Floor Heat Transfer Plates for 1/2" PEX from Radiant Heat Store

Ultra conductive tempered aluminum offers the best heat transfer for radiant heating. Aluminum return plates are a total 12" wide and have an 8" diameter (on-center) groove. These plates allow perfect 8" supported spacing of tubing lanes and compliment all of our double and single omega shaped radiant heat transfer plates for 1/2" pex. Using these return plates prevents tube kinks, helps make installation easier, allows equal 8" spacing across the floor and will increase the heat output of your radiant heating system. Plate channel is designed for 1/2" nominal I.D. tubing (5/8" O.D.) and can be used with most any brand of PEX, PEX-AL-PEX, Composite or EVOH coated 'Oxygen Barrier' PEX. Radiant heat transfer plates are typically used for under floor (between joist) or above subfloor (sleeper) installation, but can also be used in radiant wall and ceiling installations. Product Dimensions: 12" Width x 6" Long x 0.625" Height x 0.032" Thick Plates come with a protective plastic film. This will ensure that the plates arrive in the best possible condition. Please remove the covering before installation.

  • UPC: 710308257258
  • ASIN: B07792YH15
  • Brand: Radiant Heat Store
  • Manufacturer: Radiant Heat Store

VIVO 7 Loop 1/2 inch Pex Manifold Stainless Steel Radiant Floor Heating Set | 7 Branch Kit (PEX-M12-7)

VIVO 7 Loop 1/2 inch Pex Manifold Stainless Steel Radiant Floor Heating Set | 7 Branch Kit (PEX-M12-7)

PEX-M12-7 is a complete stainless steel manifold set/kit for 7 * 1/2" pex loops. Includes everything in the pictures provided (1) Stainless steel supply manifold with 7 pex outlets and 7 installed adjustable flow meters/indicators (adjust the flow rate on each individual loop and monitor GPM). (1) Stainless steel return manifold with 7 pex outlets and 7 installed adjustable flow valves (adjust the flow rate on each individual loop). (2) Isolation ball valves with 1" NPT connections and temperature gauges (monitor supply and return temperatures). (2) Automatic air vent/eliminators (automatically purge air out of the radiant heat system, also allows for pressure testing). (2) 3/4" Drain valves with cap and adapters (for convenient filling or draining of the system). (2) Heavy-duty mounting brackets preinstalled (allows for easy mounting and installation). (20) 1/2" Pex manifold adapters (converts 3/4" to 1/2"). Not suitable for potable water applications.

  • UPC: 818538022179
  • ASIN: B07CYGWBJG
  • Brand: VIVO
  • Size: 7 Loop
  • Manufacturer: Rifeng

Happybuy Oxygen O2 Barrier PEX Tubing - 1/2 Inch x 1000 Feet PEX Tube Coil - EVOH PEX-B Pipe for Residential Commercial Radiant Floor Heating Pex Pipe (1/2" O2-Barrier, 1000Ft/Red)

Happybuy Oxygen O2 Barrier PEX Tubing - 1/2 Inch x 1000 Feet PEX Tube Coil - EVOH PEX-B Pipe for Residential Commercial Radiant Floor Heating Pex Pipe (1/2" O2-Barrier, 1000Ft/Red)

Oxygen O2 Barrier PEX Tubing - 1/2 Inch x 1000 Feet Tube Coil - EVOH PEX-B Pipe for Residential Commercial Radiant Floor Heating Hot Cold Water Plumbing PEX Tubing ADVANTAGES of the Oxygen O2 Barrier PEX Tubing: Superior temperature and pressure ratings - Pex Tubing is a strong and flexible cross-linked polyethylene tubing with superior temperature and pressure ratings that is useful for plumbing project in commercial and residential hydronic radiant heating applications Prevents corrosion - PEX tubing was manufactured with an oxygen barrier add on which limits oxygen permeation and prevents corrosion of iron compound of metal parts in heating systems Durable freeze protection - The tubing composite also provides additional benefits of durable freeze protection by expanding and contracting to function as snow melting application Resistant to temperature aging - PEX tube is resistant to temperature aging and will provide you with longer life expectancy and maintenance free for exceptional performance TECHNICAL DATA: PEX Tubing Size: 1/2" OD: 0.625" ID: 0.475" Length: 1000 Feets PEX Type: PEX-B Pressure Ratings: 80psi @ 200F, 100psi @ 180F, 160psi @ 73F Minimum Bending Radius: 5" (Industry Standard for 1/2" PEX) SDR-9 Dimensional Standards Marked every 5ft with technical information APPLICATIONS: Structural concrete slabs (rebar or wire mesh reinforced slabs) Non-structural slabs (thermal mass, gypsum slabs) Staple-up (between joists) radiant floor heating with and without heat transfer plates "Sandwich" types radiant heating (between subfloor and finished floor) Snow & ice melting systems Baseboard & radiator heating systems

  • UPC: 601285880648
  • ASIN: B072PRSM7T
  • Brand: Happybuy
  • Size: 1/2" O2-Barrier
  • Manufacturer: Happybuy

Thaisan7, (10) Aluminum 180 Degree Return Radiant Floor Heat Transfer Plates for 1/2" PEX-12"Wx6"Lx 0.625" H x 0.032" Thick

Thaisan7, (10) Aluminum 180 Degree Return Radiant Floor Heat Transfer Plates for 1/2" PEX-12"Wx6"Lx 0.625" H x 0.032" Thick

Aluminum return plates are a total 12" wide and have an 8" diameter (on-center) groove. These plates allow perfect 8" supported spacing of tubing lanes and compliment all of our double and single omega shaped radiant heat transfer plates for 1/2" pex. Using these return plates prevents tube kinks, helps make installation easier, allows equal 8" spacing across the floor and will increase the heat output of your radiant heating system. Plate channel is designed for 1/2" nominal I.D. tubing (5/8" O.D.) and can be used with most any brand of PEX, PEX-AL-PEX, Composite or EVOH coated 'Oxygen Barrier' PEX. Radiant heat transfer plates are typically used for under floor (between joist) or above subfloor (sleeper) installation, but can also be used in radiant wall and ceiling installations. Product Dimensions: 12" Width x 6" Long x 0.625" Height x 0.032" Thick . Our plates come with a protective plastic film. This will ensure that the plates arrive in the best possible condition. Please remove the covering before installation. Item code : ST8928749311SN2692) - 0hgo-nn-80so0w3m-q-un-su-lt

  • UPC: 703508733264
  • ASIN: B07P5CJTGX
  • Brand: thaisan7

Durable Cable Ramp Protective Cover - 2,000 lbs Max Heavy Duty Drop Over Hose & Cable Track Protector, Safe in High Walking Traffic Areas - Cable Concealer for Outdoor & Indoor Use - Pyle PCBLCO19

Durable Cable Ramp Protective Cover - 2,000 lbs Max Heavy Duty Drop Over Hose & Cable Track Protector, Safe in High Walking Traffic Areas - Cable Concealer for Outdoor & Indoor Use - Pyle PCBLCO19

PylePro Model : PCBLCO19Cable / Wire Cover Ramp TrackCable Cover Ramp, Cord/Wire Protector Concealment Track Features:Rugged, Durable, ReliableProtective Cable ConcealmentBright & Visible Yellow Safety ColorSafe in High 'Walking-Traffic' AreasAnti-Slip Textured Surface Design Ability to Cover Multiple Cables/Wires/CordsNon-Interfering Style Allows Wheels & Carts to Roll OverInterlocking Design Allows for Multiple Connection LengthsPerfect for Power Lines, Extension Cords, Network Cables, etc.Used in Homes, Offices, Warehouses, Stores, Stages & MoreExtra Rugged 2,000 lb. Max Load CapacityMaximum Cable Diameter/ Thickness Compatibility: 0.5''Heavy Duty Engineered Polyethylene ConstructionSize (L x W x H): 39.8'' x 4.9'' x 0.8'' The Pyle 'PCBLCO' Cable Ramp Track Covers provide safe and reliable cord and wire management. Made from heavy duty engineered construction, these cable protectors add safety and comfort in any environment -- indoors or out! The bright yellow color makes the system clearly visible and the anti-slip textured surface can handle the stresses of high-traffic public areas. The extra rugged construction has an impressive 2,000 lb. load capacity and the non-interfering design allows carts and strollers to roll right over. Interconnect multiple tracks for cable management in larger demanding areas. Keep your equipment safe and allow everyone to pass-by with the Pyle 'PCBLCO' Protective Cable & Wire Concealment Ramps (sold as single track).

  • UPC: 068888760614
  • ASIN: B010FH1YXE
  • Brand: Pyle
  • Manufacturer: Sound Around

PEX GUY Extruded 4 Ft Aluminum Heat Transfer Plates for 1/2" PEX (25 pc/box)

PEX GUY Extruded 4 Ft Aluminum Heat Transfer Plates for 1/2" PEX (25 pc/box)

This is a box of Genuine PEX GUY 4ft long Aluminum Heat Transfer Plates for 1/2" PEX tubing. These are Genuine PEX GUY Extruded Aluminum Heat Transfer Plates for 1/2" PEX tubing. This listing is for 25 pcs of these plates. They are thicker than the standard PEX GUY Aluminum Heat Transfer Plates. There are 10 pre-drilled mounting holes to be used with these plates; we recommend #8 or #10 screw size for fastening; Hole size is approx .19" in diameter. These plates are designed to be installed to your mounting surface, and snapping the 1/2" PEX piping into them. As is all PEX GUY Aluminum Heat Transfer Plates, they are proudly produced here in the USA. Details: - Manufactured from stamped aluminum.- The thickness of these plates is 0.06"- Compatible with all types and brands of 1/2" PEX tubing (5/8" OD). - Can be used for subfloor or sandwich type radiant heating installations to improve heat transfer properties of the system and lower the water supply temperature, thus reducing the heating bills. - Recommended spacing for parallel tubing runs is 8" OC. *** CALCULATIONS (assuming 8 inch spacing): Number of plates = sq area x 1.30 / length of plates *** - Example: 1000 sq ft area multiply by 1.30 = 1300ft of plates (650 plates of the 2ft version or 325 plates of the 4 ft version). Note: Do not overlap the ends of the plates, make sure you have at least 2-3 inches spacing from end to end.

  • ASIN: B06WLJ2M2B
  • Brand: PEX GUY
  • Manufacturer: PEX GUY