Renogy Adventurer 30A 12V/24V Negative Ground PWM Flush Mount Charge Controller with LCD Display, Compatible with Sealed, Gel, Flooded and Lithium Batteries
Renogy Adventurer 30A 12V/24V Negative Ground PWM Flush Mount Charge Controller with LCD Display, Compatible with Sealed, Gel, Flooded and Lithium Batteries
Meet the Renogy Adventurer-Li, newly improved with two advanced features. Thanks to its programmable Lithium charging voltage, the 30A PWM solar charge controller is now capable of charging most Lithium batteries available on the market. The second addition to the controller is the RS232 port, used to connect and communicate with the Renogy BT-1 Bluetooth module. By adding the BT-1 to the Adventurer-Li, you can now use the smartphone app, Renogy BT, to monitor and adjust your solar system remotely. Unique in its form, the Adventurer-Li is a negative-ground, flush mount controller, designed for an aesthetically clean and integrated look on RV and camper walls. However, if flush mounting does not appeal to you, an included Surface Mount Attachment allows you to forgo it. Capable of charging both 12V and 24V photovoltaic systems, the Adventurer-Li integrates highly efficient PWM charging to increase battery longevity by regulating the charge flowing from the solar panels to the battery bank. This charge controller comes equipped with a fully comprehensive self-diagnostic system and electronic protection functions to prevent damage from installation mistakes or system faults. Specifications:Nominal Voltage: 12 VDC/ 24 VDCRated Charge Current: 30AEqualization Voltage: Sealed: 14.6 V; Gel: None; Flooded: 14.8 VFloat Voltage: 13.8 VSelf-consumption: ≤13mAOperating Temperature: -13°F to 131°FEnclosure: IP20Terminals: Up to 8 AWGUSB Output: 5V, 2.4A MaxMax. PV Input Voltage: 50 VDCBoost Voltage: Sealed: 14.4 V; Gel: 14.2 V; Flooded: 14.6 V; Lithium: 14.2 VUnder Voltage Warning: 12VTemperature Compensation Coefficient: -3mV/°C/2VStorage Temperature: -31°F to 176°FDimensions: 6.56 x 4.50 x 1.90 inchesWeight: 0.6 lbs
- UPC: 816360026396
- ASIN: B07BBKFTNV
- Brand: Renogy
- Size: Lithium Battery Compatibility
- Manufacturer: Renogy
Renogy Wanderer Li 30A 12V PWM Negative Ground Charge Controller Compatible with Lithium, Sealed, Gel, and Flooded batteries and Renogy Bluetooth Module
Renogy Wanderer Li 30A 12V PWM Negative Ground Charge Controller Compatible with Lithium, Sealed, Gel, and Flooded batteries and Renogy Bluetooth Module
The Renogy Wanderer-Li is a 30A PWM solar charge controller that integrates efficient PWM charging to increase battery life and improve system performance. Designed with a simple interface for ease of use, the controller uses multiple LED indicators to notify users of charge status and battery information. This newly improved model has two advanced features: an RS232 port and Lithium battery charging. With the addition of the RS232 port, users can now connect and communicate with the Renogy BT-1 Bluetooth module. By adding the BT-1 to the Wanderer-Li, you can now use the smartphone app, Renogy BT, to monitor and adjust your solar system remotely. With the inclusion of the Lithium Battery Mode, the 30A negative-ground controller is now capable of charging various 12V battery types and banks, including most 12V lithium models available on the market. Specifications Nominal Voltage: 12 VDC Max. PV Input Power: 400W Rated Charge Current: 30A Max. PV Input Voltage: 25 VDC Self-Consumption:
- UPC: 816360027676
- ASIN: B07G1PL1B9
- Brand: Renogy
- Size: 30A Li
- Manufacturer: Renogy
Instapark INCC1205 12V / 5A Waterproof PWM Solar Charge Controller
Instapark INCC1205 12V / 5A Waterproof PWM Solar Charge Controller
The Instapark INCC1205 solar charge controller is designed and engineered to prevent your 12V battery from overcharging when it's connected to a solar panel, therefore protect your investment and extend the battery life. The INCC1205 solar charge controllers is equipped with PWM technology to ensure that your battery reaches its maximum charging capacity without causing any damage to the battery. Similar to other modern high quality battery chargers, PWM algorithm gradually reduces the charging current to avoid over-heating of the battery, yet the charging continues to return the maximum amount of energy to the battery in the shortest time resulting in higher charging efficiency, faster recharging and a healthier battery at its full capacity. Each INCC1205 charge controller comes with four green LED indicators and one red LED indicator displaying battery status, connection status and real-time battery charge capacity. The INCC1205 solar charge controller is in full conformance with both CE and RoHS standards and is backed up by a standard 2-year manufacturer's warranty. Specifications: Rated solar input current: 5A Rated output charging current: 5A Charging voltage: 12.8V Cut-off voltage: 14.6V Float voltage: 13.8V Temp Comp. (mV/°C): -30mV/-60mV Temperature: -31°F to 131°F Package Includes: Instapark INCC1205 12 volt / 5 amp Solar Charge Controller Battery Terminal Clamps 5.5mm x 2.1mm female to bare wires (solar panel output) adapter User manual
- UPC: 716080042846
- ASIN: B00MEQVJQW
- Brand: Instapark
- Size: Waterproof
- Manufacturer: Instapark
Y&H 30A PWM Solar Charge Regulator 12V/24V Solar Panel Charge Controller Battery Voltage Intelligent Regulator USB Port 5V Light Timer Control LCD Display
Y&H 30A PWM Solar Charge Regulator 12V/24V Solar Panel Charge Controller Battery Voltage Intelligent Regulator USB Port 5V Light Timer Control LCD Display
Note: Old version CM20K-30A for Lead Acid Battery. Currently Superior CM 20KL - 30A. For Lead Acid Lithium - ion LiFePO4 Battery. Updated February - 18.Update Version CM20KL controller is a kind of intelligent, multi-purpose solar charge and discharge controller. Fixed LCD display with a very friendly interface is used in this product; various control parameters can be flexibly set, fully meet your various application requirements. Features: 1. Floating charge Voltage(HVD 13.3V-15V) 2. Recovery after under Voltage(LVD 11V-13.5V) 3.Under Voltage protection (RVD 9V-12.3V) 4.Load Mode(24hours,1-23hours,0hour) 5.Battery Option (GEL,LEAD-ACID,FLOODED,Lithium-ion LiFePO4) MODEL: CM20KL-30A Batt voltage: 12V/24V auto Charge current: 30A Discharge current: 30A Max Solar input:
- UPC: 758232495643
- ASIN: B071ZVD7R5
- Brand: Y&H
- Size: CM20K-30a
- Manufacturer: Y&H
Renogy 100W Bundle Solar Panel Kit with Wanderer 30A PWM Charge Controller, 9in MC4 Adaptor
Renogy 100W Bundle Solar Panel Kit with Wanderer 30A PWM Charge Controller, 9in MC4 Adaptor
Our Renogy 100W Polycrystalline bundle comes with components That you will need to expand on a system you may already have, or just need some items to complete your system. Our 100W Polycrystalline Solar Panel, 9in MC4 Adaptor Kit, & 30A PWM wanderer charge controller are included. Keep in mind that this kit allows for the charge controller to be close to the solar panel so depending on your situation, you may still need an extension cable or longer wiring. This bundle kit can be the perfect option for creating an offgrid solar System.
- UPC: 720825342245
- ASIN: B00FM235Y4
- Brand: Renogy
- Size: 100W Poly with PWM 30A
- Manufacturer: renogy
20A 12V-24V Digital Display Solar Panel Regulator Charge Controller USB 4-stage PWM Charge Management
20A 12V-24V Digital Display Solar Panel Regulator Charge Controller USB 4-stage PWM Charge Management
DescriptionMake sure your battery has enough voltage for the controller to recognize the battery type before first installation.The battery cable should be as short as possible to minimize loss.The regulator is only suitable for lead acid batteries: OPEN, AGM, GELIt is not suited for nickel metal hydride, lithium ions or other batteries.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.Specification:Rated Voltage: 12V 24V Auto.Application: Solar System Controller.Rated Current: 20A.Max. PV Voltage: 50V.Size: 133 * 70 * 34mm.Note:There might be a bit color distortions due to different computer resolutions.There might be size errors due to different computer resolutions.Package include:1 * 20A solar panel charge controller.
- UPC: 666022207843
- ASIN: B07L71MNLZ
- Brand: FOUR
- Size: 133 * 70 * 34mm
- Manufacturer: FOUR
PoityA 6V 12V 10A Auto Solar Panel Charge Controller Battery Charger Regulator PWM Hot
PoityA 6V 12V 10A Auto Solar Panel Charge Controller Battery Charger Regulator PWM Hot
100% brand new and high quality Material: Plastic Color: See Pictures System Voltage: 6V, 12V Output Current: 10A Power Range: ≤60W(6V), ≤120W(12V) Overload, Short Circuit Protection: Yes No-load loss: ≤5mA Charge Loop Drop: ≤0.2V Disharge Loop Drop: ≤0.1V Protection Degree: IP30 Working Temperature: -40℃~55℃ Install and Method of Using: Firstly, determine the controller output mode , the device factory default setting is normally open mode .if you need to set for the pure light control mode or light control plus timing mode, you need to open the enclosure through set dip switch, changing the discharge mode When the key set ""on"" is 1, the key set ""off"" is 0, normally open, pure light control Connecting the battery first. if correctly connected, battery indicator will light Connecting the wire of the solar panel second. if the connection is correct, the indicator light of "charge"will be on or flash 10 seconds later after laying outside under the sun. otherwise, please check the connection Making sure the solar energy panel is laid outdoors under the sunshine Connecting the load at the end. if inversely connected, the led lamp may be damaged Please pay attention to the anode and the cathode to avoid the inverse connection Size: See the picture No Retail Package Quantity: 1 Pc Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
- ASIN: B07TS2DFV8
- Brand: PoityA
- Size: as picture show
- Manufacturer: PoityA
MorningStar ProStar PS-30 PWM Solar Charge Controller, 30 Amp 12/24 Volts Outdoor, Home, Garden, Supply, Maintenance
MorningStar ProStar PS-30 PWM Solar Charge Controller, 30 Amp 12/24 Volts Outdoor, Home, Garden, Supply, Maintenance
Morningstar PS-30 ProStar Solar Controller 30A. Morningstar's third generation ProStar is the world's leading mid-range solar controller for both professional and consumer applications. Additional Key Features and Benefits RJ-11 MeterBus port for serial MODBUS data or to add a remote meter Up to 256 days of data logging Dusk-to-dawn and advanced programmable lighting control Protective terminal cover Enhanced surge rating for heavy DC loads Self-diagnostics Slow switching mode to eliminate system noise at telecom sites Parallel for up to 300 amps Temperature compensated charging Tropicalization No switching or measurement in the grounded leg 100% solid state Very low voltage drops Current compensated low voltage disconnect (LVD) LED's to indicate battery status and faults Capable of 25% overloads Remote battery voltage sense terminals
- ASIN: B00L58PQC8
- Brand: Garden & Lawn Supply
- Manufacturer: Morningstar
Renogy Voyager - 20A Negative PWM Waterproof Charge Controller w/LCD Display and LED Bar + Temperature Sensor
Renogy Voyager - 20A Negative PWM Waterproof Charge Controller w/LCD Display and LED Bar + Temperature Sensor
Descriptiom: The 20A Voyager is Renogy's first waterproof PWM charge controller. Featuring a sophisticated and comprehensive LED bar for charge state identification and a bright blue back-lit LCD for displaying system information including error codes, the Voyager was engineered to be of world-class quality. Suitable for 12V off-grid applications, the Voyager can charge up to 7 different battery types, including lithium ion! Ensure your batteries's longevity thanks to its advanced and efficient 5-Stage battery charging algorithm and stay worry-free as the Voyager is equipped with multiple electronic protections. Specifications: Grounding: Common Negative Nominal Voltage: 12 VDC Rated Charge Current: 20A Max. PV Input Voltage: 26V Self-consumption: ≤8mA Temperature Compensation Coefficient: -24mV/°C Operating Temperature: -40°F to 140°F Storage Temperature: -40°F to 185°F Terminals: Up to 10 AWG Enclosure: IP65 Dimensions: 6.38 x 3.82 x 1.34 inches Weight: 0.88 lbs
- UPC: 816360025610
- ASIN: B075SP5F5R
- Brand: Renogy
- Size: Controller + Temperature Sensor
- Manufacturer: Renogy
AIMS Power (SCC30A) 30 Amp PWM Solar Charge Controller 12/24 VDC
AIMS Power (SCC30A) 30 Amp PWM Solar Charge Controller 12/24 VDC
The AIMS 30 amp solar charge controller is ideal for smaller solar arrays and DIY projects. This charge controller is capable of handling 400 watts worth of solar panels for a 12V battery bank and 800 watts at 24V dc. The Charge Controller comes with a digital display with selectable Amperage or Voltage monitoring. Its small size means mounting options are limitless. At just under 7 1/2 inches by 5 inches, this solar charge controller can fit in the tightest of confines, making it easy to mount in a vehicle, on a boat, in a cabin or wherever you deem fit. The Charge Controller is equipped with Solar Over-Current protection, limiting the amount of voltage delivered to the batteries to their respective voltage limits. It also comes with reverse polarity protection, short circuit protection and high temperature protection.
- UPC: 840271002170
- ASIN: B00JGBHMXW
- Brand: AIMS Power
- Manufacturer: AIMS Power